Find experienced local fencing contractors in ACT

I would like my garden fence reinforced, there are loose panels which need a nail gun to secure them. Quick and easy job.

I need some wire removed from ~10m of fence structure and then bamboo-type screening wired/tied on. It will require a bit of navigating the garden bed and some problem-solving to do the screening effectively on a gate. I think I have all the supplies needed and estimate the job will take ~3-4 hours. I need it done by 25 Sept but can be flexible about timing.

We have an existing above ground veggie garden that we would like to have modified with sides and top to keep dogs/birds/mice out. See photos of what we have now vs what we are looking for. Also needs a secure gate. Flexible budget

Construct a double garden gate (two gates closing on each other), each gate approximately 1.585 meter high and 0.88 m wide. They should consist of good quality timber boards, rounded at the top, and attached to a suitable timber or steel frame. The gates should have a keyed lock, preferably a Lockwood brand. The gates need to be installed, and attached to a brick garden wall on either side.

Install a new green colourbond gate to create a rabbit run down the side of my house. Quote needs to include both time and materials. - Due date: Flexible

An existing fence panel and two posts need to be moved to adjoin another row of fencing - Due date: Flexible

Due to the wind the metal colourbond sheet has come off the frame & the bottom part fixed to the frame has snapped off. Need someone to fix it as soon as possible. - Due date: Needs to be done on Thursday, 5 January 2023

We would like someone to install 2 timber sleepers at the base of a colourbond fence to prevent our dog escaping. Length approx 180cm x 2. Will need to be cut to fit We will purchase materials, but will need you to collect from Bunnings with ute or trailer

I need to divide our garden gate in two parts so that only a small portion of the gate opens instead of entire gate . Need it before the end of the year - Due date: Flexible

Garden fence needs Lifting and stabilising in order for the gat to be able to close and lock. - Due date: Flexible

We have a gate that needs fitting. Need a post concreted in to the ground for the gate to be attached. The gate is 144cm wide by 150cm high.

Need 2 fences put up.

We have an approx 10m back fence that we would like wired with either a diamond shape wire design or 2-3 horizontal wires for our star jasmine to grow up. Thank you :) - Due date: Flexible

I want to install cat netting on top of my existing fences in my backyard. I have a mixture of brick, colour Bond, and metal gates. Looking to use extension rods on top of existing fences that the cat netting can be attached to.

Help me secure chicken fence from my dogs. Move a star picket. Make it secure along the ground

Nail clipping for two greyhounds

I am looking for someone to reinforce my wooden fence so a dog cannot dig under it. This will require digging down and installing reinforcement (with wood or wire/mesh) attached to the fence. There is about 7m of fence to do. I am happy for you to come inspect and quote in person. Please quote inclusive of materials.

Install 30 meters of prefabricated iron fence including concrete posts. All materials provided.

We need the parameter secured so the dog does not go onto the road parts of it. Need a fence a gate in certain areas and other bits to be patched up. See photos for details.

Install dog door in timber fence

Remove existing fence and gate around dog run and install new higher fence with a gate. Approximately 10 metres of fencing plus gate. - Due date: Before Sunday, 10 December 2023

Star pickets to be hammered into ground and dog proof wire attached to them. - Due date: Flexible

We need a fence constructed in our back yard to keep our chickens safe from our dog and foxes. We have some fence posts and wire already. More may need to be ordered. - Due date: Flexible

Not sure! Would appreciate suggestions. Main aim is to ensure big dogs cannot get in. Would it be possible to put something temporary up in the meantime? BTW, I cannot say a budget as I have no idea what to expect! Hence put in $5!:) - Due date: Flexible

I have flat pack products to build a chook pen and dog fence from bunnings. I need someone to put them together for me.

Hi I am looking for someone to install dog proofing on my panel fence. Would require to be dug into the ground and fixed to the existing fence. Need all edges/gaps to be secured to stop my dogs escaping.

Looking to have the Oscillot cat containment fence attachment installed on 8m of colorbond fence and a 1m colorbond gate. Hoping to get this done as soon as possible. https://oscillot.com.au/pages/installation

I need star pickets put in with proper post driver and attach dog mesh which I have ready. Two areas with good access. One area about 3.5 metres and the other area about 8 metres - 7 or 8 posts maximum

Replacement of fence shared with neighbour and two gates installed. Possible lattice on brick work too. Noting price is a guess only.

We have one side of our backyard that needs a new colorbond fence. We currently have an old wooden fence that needs replacing. It’s a straight line of approx 28metres long. We want the fence to be 2m high. Can we 1.8m panels with treated pine sleepers at the bottom or 2m panels. Colour is basalt. Ideally installed in the next week.

Supply and install colour bond fence approx 16 metres 1.8

Need around 50m of colorbond fence 2m with sleepers, no gates. Existing timber fence needs to be removed Give me a offer to come and inspect

I have a colourbond fence where a couple of panels in one section have come loose. One has come out entirely. I would like the panels put back in securely

Install a wire mesh that extends one metre above the colour bond fence line.

Replace existing metal gate with a colourbond gate. I will require supply and install. Opening is approximately 175 cm from the bricks to the existing fence.

Replace existing downpipe with a new one with 2 bends, monument colour.

Our dog has dented one of the fence and panels (colourbond) and we just need the sheet cut to size and inserted. Easy job, all that needs to be done is the cap taken off and sheets swapped. Price is quite firm (maybe slight negotiation) as we can do the job ourselves, and have done it previously with no issues. Shouldn’t take much more than 30 minutes - we just can’t be bothered :)

Gate is hard to close, the current height extender does not match, gate can not be opened from outside and needs a lock. If possible would like to move gate forward slightly

Fencing and retaining wall(Timber or concrete) for a new house

We have two gates (colorbond) needs further fence/poles to complete the job. Would like someone who can put the whole of colorbond fence.

Replace timber fence with colourbond. Approx 20m ( could be less). We can supply colourbond panelling and materials - just after labour

The existing gate post (65x65mm) has been pushed over by the neighbour's garden wall so that the gate now can't be opened and closed easily. The post on the house side is OK. The job would need the gate to be removed, the existing post dug up, a new post installed so it's plumb, and the gate then re-hung. You can see in the images how much the neighbour's wall is leaning, and how the capstone has been pushed loose. It's the neighbour's wall and it needs to stay in place.

The job need to be dine at Taylor. Some modification need to be done in existing fence.

Someone to install 18m of colourbond fencing. Will have supplies area is mostly flat, maybe slight angle 1.8m high fence

Due to the strong wind a few weeks ago, 2 colorbond fence panels had fallen off the frame and post. Please help screw them back into place.

2.4 meter timber sleepers treated pine to be installed on the bottom of my colour bond fence. 10 fence panels. So 10 timber sleepers/ treated pine. Fence is already installed. Tasker to provide treated pine sleepers. There is no sleepers underneath the bottom of the fence that has been installed.

Our builders erected a colour bond fence on top of a cinderblock retaining wall. The bolts have ripped out of the retaining wall due to winds against the fence and the mortar cracking. Need the bolts replaced plus a way to secure in the mortar of the cinderblock to hold the post mount.

We need a couple of panels replaced on our colourbond fence. They’ve been bent by dogs banging up against the fence.