Find a fence repair professional in Inner South Melbourne

Description: I accidentally reversed my ute into the steel post that’s attached to my gate. The ladder on the ute hit the top section, bending the post. • Gate: Fully functional and undamaged • Post: Bent at the top, misaligned, and partially detached from the brick wall it’s fixed into • Attachment: The post is drilled into brick walls on each side of the gate • Job: Either bend the post back into its correct position or replace it, then securely re-drill/fasten it into the brick walls so the gate lines up and closes perfectly again Looking for someone with the right tools and experience in metalwork, gate repairs, and brick fixing. Please bring all necessary equipment and materials.

Need to fix the retaining wall, which is three post need to be fixed.... Looking reasonable price. Attached photos. Material I will buy you.

We recently had a fence post start to lean and it needs reseating, replacing or reinforced.

I require a fence panel removed and another one installed of the same shape , colour and size.NB-you will be required to source and collect the temporary fencing panel , the cost of which is to be borne by you and I have taken this into account in so far as the overall pricing is concerned.

Our fence has some damage — there was a hole previously patched, but the color difference is quite noticeable. As we are planning to sell the house, we’d like to have this section of the fence properly repaired and restored so that the patch is no longer visible. Additionally, there is some damage at the bottom of the fence that also needs fixing.

Need to cut 1 inch off the bottom of our paling gate so that it does not scrape against the ground. Needs to be done neatly without splinters/cracking. Also minor repair to re-screw in gate latch so that it closes cleanly.

Current paling Fence is being held up by the clothesline. It needs repair or replacing. Insurance required as the invoice will be paid by Owners Corporation. The full length of the fence is 52m, but only part is falling over. Not sure if replacement or repair is the better option. Paling height 1950mm.

Repair lattice on fence, falling down.

Replace gate posts and replace timber on metal gate frame.

The part that hits the strike is jammed

Fence repair needed done

1. Repoint masonry arch 2. Fix brick fence top and repoint

3 things: 1) Driveway Gate does not fully close. 2) Back gate is stuck, won’t open and close properly. 3) Side gate does not close well. Need help to get these able to open and close well.

need two perhaps 3 new support posts the fence is leaning/ bowing.And replace one long horizontal pailing appromately 4 m X 150 mm wide on a side fence.

need two perhaps 3 new support posts the fence is leaning/ bowing.And replace one long horizontal pailing appromately 4 m X 150 mm wide on a side fence.

Gate continues to slip causing lock and latch to be misaligned.

Exterior handle on front gate remains down (doesn't return to horizontal position) Latch does not easily slide in & out so the gate does not close easily. It also often gets stuck in the lock unit (see pic). Gate has electric strike as per picture.

Our manual front gate has become misaligned on both sides. One side has popped out completely, and the hinges may need to be repaired or replaced. It may require full reinstallation to ensure it closes properly and is secure.

Hi my driveway gate needs to be fixed into the hinges and the bolts need to be screwed back.

remove existing broken pailing and 2nd wider pailing (to close gap) and supply and install with new treated pine pailing and galvanised nails. height approx 110mm (cut on site to correct heights);