Find a fence installation professional in Baulkham Hills

SUPPLY AND INSTALL : A pool compliant gate needs to be supplied and installed to isolate the passage shown in the photo. This is to make the pool compliant. The release mechanism of the latch must be at least 1500mm above the finished ground level The gap under the fence and between vertical bars must not exceed 100mm It must self-close and latch securely every time without help The gap at the bottom of the gate must be no more than 100mm from the ground The gate must open outwards (away from the pool area). It cannot swing into the pool area. Parts will be billed at acuals based on the receipt you provide. On top of that the labour as per this job will be paid

I need to move a panel of a glass pool fence and need 2 new spigots installed into concrete. Need two core drilled holes in concrete. As per the photo I need to remove the two spigots on the left with red and install two new ones where there is a yellow highlight.

Professional licenced contractor needed who can provide a certificate of currency for their insurance and their Fair Trading business registration certificate. Scope of Work: Remove existing fence. - Dig out old timber posts and concrete footings. - Build new lap and cap timber fence for a distance of 11 long and 1.8m high. - Supply and fit - Includes all Labour and Material- All rubbish removed from site.- Includes tip fees. NOTE: All existing merbau screening will be removed prior to the commencement of works. Removal of the screen is not included.

Install Colorbond Gate and Panels. 1. Opening 3600mm Filler Panel. 2. Opening 1400mm ( wants gate 1000mm rest filler panels) All the materials are already there. Need someone-to install them please.

I need someone to install a pool fence gate to lock up a corridor, materials are supply, installation only.

I would like to install a few fence extensions on both sides of my house. Fence extension to be purchased via bunnings (Matrix 2400 x 600mm Charcoal Rainforest Fence Extension). Image 1: 3.5 panels to be installed at side walk Image 2: One old extension to be removed and replaced. 3 panels to be installed here We would also like to have the extension installed above the gate (Image 3) but we would need to discuss whether this is possible

I’d like to build 1.2m height brick fence in front. The length is about 8m (see photo). The style I’d like to match is in the photo as well

I have bought 40 meters of fence and 3.5 meter wide automatic sliding gate and need help with installing all of them. Location - Baulkham Hills 2153 NSW

Supply and install slat fencing on top of existing alfresco brick wall to raise it by 600mm along the boundary of the wall please see photos with rough measurements -needs to be professionally completed

Replace existing fence post and strengthen .

Replace existing colourbond posts.

Build metal fence as highlights in photo

Replace existing wire fence with approximately 20 linear metres of new Colourbond 1800mm high fence on south boundary of residential property. Must have fencing contractor licence, expertise and insurance.

Supply and install grey aluminum slat gate and fence. Gate is 1.35m, fence 1.35m. Total run 2.7. Supply and install

The pictures are of my existing fence. I needed it extended one more bay and I would like to make it look consistent from one end to the other. I think a full replacement will be the way to go but I am open to ideas. The total length including the extension is approx 21m and I can do a detailed measure. If you price to replace please include the disposal of the existing fence. I don’t know how much this costs so budget is a dummy number. Please quote.

All we need is the right screws for the wall to put in our baby gate, the wall is hallow on the other side and we didn’t have luck doing it ourselves. It should really be easy

Need to replace handrails and done rotten posts. I will pick up material and have on-site for you ready to go.

Supply and install colourbond "Basalt" double gate (incl posts) between brick veneer house and colourbond fence. Approx length 2.5m. required Height 1.8m. First picture shows gap where gate is to be installed, Second picture shows sample of what we want installed. Gate needs to be installed low enough to ground to keep dog in yard.

I need a handyman to install three privacy screens onto colour bond fence. I have the posts and tracks and screws to frame these screens. I am just after someone to install. Attached is a photo of what I want this to look like screens are 2410x600.

I want to update my old fence, the length is around 30m