Find trusted local electricians in WA

I’m looking for a WA licensed electrician/electrical contractor with EV charger installation experience to install a MG 7kW Charge Hub Pro at my home in Willetton. Charger supplied by me - MG 7kW Charge Hub Pro - 7kW single-phase - Type 2 - 5m cable Existing setup - Existing residential switchboard as shown in attached photo - Property has solar installed - Existing main switch appears to be around 40A, but this must be verified onsite Scope of work - Inspect the existing switchboard and confirm whether it is suitable for a dedicated 7kW EV charger circuit - Confirm available supply capacity and phase loading - Supply and install a dedicated 32A circuit for the charger - Supply and install all required cable, conduit, breaker/RCBO, isolation and protection devices - Carry out any minor switchboard modifications reasonably required to make the installation compliant - Mount and connect the MG Charge Hub Pro - Test and commission the charger - Provide all required WA electrical compliance/certification documentation Important Please base your offer on a complete, compliant installation, including labour and standard materials. If inspection shows that a major switchboard upgrade, consumer mains upgrade, or other substantial additional work is required beyond a normal EV charger installation, please discuss this with me before carrying out that additional work. Please include with your offer - WA electrical licence / contractor details - EV charger installation experience - Confirmation that your price includes standard cable, conduit, breaker/RCBO, installation, testing and certification - Installation warranty - Earliest availability I can provide photos of the switchboard, proposed charger position and likely cable route before the job. Only licensed electricians able to certify the complete installation, please.

I have 5-7 led lights I think they are. And I need them installed in kitchen area , and I have fittings for the lights where plug fits in. I also had stove removed, and I need a power point put in its place for fridge. Available from 4:45pm in the week . There is an exhaust fan that I will remove , and I also need a light switch installed, and possibly another power point.

We have 1 downlight in our kitchen ceiling that needs replacing. The downlight is 800mm, the housing/fitting around it is 1000mm in total.

Looking for affordable aircon installation

Looking for a licensed electrician for two outdoor lighting install jobs. I will supply all light fixtures in-ground/recessed uplights around the pool coping — 4 at the corners, 2 near the step/bench area Need conduit + light housings set in before the limestone paving is poured/laid — fittings/wiring/termination can happen after paving cures 2x IP65 up/down wall lights, fixed to house's rendered brick exterior, facing the pool/backyard

Supply wire and rewire of clothes line. Old line has been removed already.

Need 4 power points and an oven connected

Replace 4 outdoor wall lights, and 1 outdoor sensor light. I’ve put photos up of what’s currently there, plus the replacement lights we’re getting from Bunnings. If there’s any red flags with what we’ve chosen, happy to receive the advice, as can swap them if needed.

One of my smoke alarms was chirping tonight - on inspection it needed replacing 5 years ago (oops). I have three that need replacing. Wiring is all there, just need a licenced sparky to put three new ones in (Bunnings is at the bottom of our street if that helps). The old ones are EXIT EXI3786M9, an old ionisation smoke alarm model that has been discontinued.so would need a whole new unit not just a replacement head.chucking a price up that would include you supplying smoke alarms — ones in last picture are $35 each at Bunnings.

looking for a plumber who wants to take on extra jobs.

Looking for a fully licensed electrician for a small residential job: • Change an existing power point to a double power point with USB outlets • install a 15-amp outlet for a commercial-style solarium/tanning bed • Check the electrical requirements of the solarium and advise whether a dedicated circuit or switchboard upgrade is required • All work must comply with current Australian/WA electrical standards and requirements • Please provide the required electrical safety certificate/certification on completion Location: Edgewater, Perth, WA Please quote labour and confirm your WA electrical licence. I can provide photos/specifications of the solarium and existing switchboard if required.

I need to have some ceiling work done and need the halogen down lights disconnected before it can be done

Licensed electrician for Sauna hook up. 9kw harvia (BC90) heater, needs a 40amp installation to three phase power box. Approx 5m straight line distance via roof, access via manhole.

New heat pump dryer. Already in place. I just am incapable of reading instructions and being handy with tools. Afraid to break it. It works for 5 mins and then stops, but i have not set up properly

Electric free-standing oven/cooktop. Disconnect wiring from wall. Easy access

URGENT – MUST BE COMPLETED TONIGHT An outdoor wall light has broken off the wall and is currently hanging with exposed wiring. It is also raining heavily, so I need a licensed electrician tonight to make the area completely safe. I do not need the light repaired or replaced. I would just like: * The damaged light fitting removed * The wiring permanently disconnected/is​​olated and safely terminated * The area left electrically safe and weatherproof * Confirmation that it is safe to restore power to the remaining circuits The affected circuit can remain switched off until you arrive. Please only offer if you are a licensed electrician and can attend tonight. Located in Doubleview Please provide quote.

I purchased a hanging light fitting to hang above the kitchen bench that I would like installed. There is already an exiting light fixture there to use. Light fitting purchased from IKEA.

1 x outdoor power point near switchboard 2 x garage power points 1 x outdoor light stopped working for some reason, would like to see if can be repaired

There is an electrical plug near to the toilet floor. Need this to be moved up and connected to a RCD plug. Not sure of the price. If they can be a team to fix the tile it will be perfect and extra will be paid.

Dryer cord got very hot and damaged outlet, needs replaced or at least checked. Dryer also needs tested to see if that was the issue. I work during business hours, can only meet after 5pm or weekends