Find a reliable cooktop installation and repair service in Mount Waverley

Need an electrician to put a 32amp wiring for an induction cooktop.

I have two Bosch gas cooktops, both having a wok ignition head in fault. The first one is Bosch PCR9A5B90A/01. It sparks well but the old ignition head ceramic has cracked. The second one is Bosch PCR915B91A/40. The centre wok burner has no ignition spark, while the other four burners spark normally. I already got both the replacement parts from the official store. Need a gas-fitter to put the new ones on.

Need replacing Rangehood and Gas Cooktop. Relevant compliance certificate is required.

Details : Require "only labour" to disconnect and remove existing cooker and install a freestanding 600mm cooker with gas cooktop and electric oven, which I will supply.The job includes: - 1) Install the supplied freestanding - gas cooktop and electric oven . Note: gas connection exists but electric line has to be run through from the board) 2) Levelling and securing the appliance 3) Testing all burners for correct operation 4) Test the electric oven 5) Checking for gas leaks upon completion Location Mount WAVERLEY, Victoria. Please quote for "labour only"

Details : Require "only labour" to disconnect and remove existing cooker and install a freestanding 600mm gas cooker with gas cooktop and gas oven, which I will supply.The job includes: - 1) Install the supplied freestanding gas cooktop and oven to existing gas outlet (natural gas ) 2) Levelling and securing the appliance 3) Testing all burners and oven for correct operation 4) Checking for gas leaks upon completion Location Mount WAVERLEY, Victoria. Please quote for "labour only" Regards

Looking for an experienced handyman or appliance technician to investigate and fix an issue where my kitchen cooktop is generating excessive heat. This job is part of SDA / Accessibility Compliance works so it’s important the repair meets appropriate safety and usability standards. Issue: - When the hot plate is in use, the cupboard beneath/next to the appliance becomes extremely hot. - Kitchen utensils and items stored inside the cupboard become uncomfortably hot and may present a safety risk. - The level of heat suggests inadequate insulation or heat shielding between the appliance and cabinetry. 🛠️ Scope of Work / What’s Required: - Inspect the cooktop installation and surrounding cabinetry. - Diagnose the cause of the excessive heat transfer. - Assess whether insulation, heat shielding, clearances, or ventilation need improvement. - Carry out suitable repairs or modifications. - Test the outcome to ensure the cupboard remains at a safe temperature during normal cooktop use. Notes: - Must bring own tools and materials - Potential for ongoing work Please confirm in your offer: Your experience with similar repairs Repair works must be completed to a good standard as they are required for final compliance/inspection. Thanks in advance.

Im setting up a gas cooktop in the alfresco using bottled gas. I've bought a new gas cooktop which comes with NG/LPG conversion kit. looking for a qualified person to properly configure the cooktop.

My gas cooktop is not working properly. The largest (centre) burner cannot work properly. After it is turned off, it cannot be ignited again immediately. I need to wait for a period of time before it can be lit again.

Need to Install New Gas Stove & New Range hood and remove the existing one.

Gas cooktop has been removed and gas shut off. I need my new induction cooktop installed by an electrician

I need my gas cooktop disconnected in preparation for installation of an induction cooktop. If you can do both, that would be a bonus- please let me know. But this job is specifically for disconnection from gas.

I'm replacing my gas cooktop with an electric one. Need to terminate gas connection to cooktop.

Installation of a 4 burner Gad Cooktop on Kitchen Bench

After detailed cleaning by someone only 2 top burners are working the others are not. Need someone fix it. It has been 4 weeks

Replace Induction Cooktop (Same Model) Product: IKEA MATMÄSSIG Induction Hob 300 https://www.ikea.com/au/en/p/matmaessig-induction-hob-ikea-300-black-10467267/ Task details Need a licensed electrician to swap out my existing induction cooktop with a brand-new one — it’s the exact same model, already on site and ready to go. No changes to the bench or wiring setup should be needed. What’s involved • Turn off and isolate power • Disconnect and remove the old cooktop • Unpack, check, and install the new unit • Connect to existing wiring (hardwired) • Test that everything works correctly and safely • Quick demo of operation • Clean up the area and take away the old unit Notes • Easy access and parking available • Please bring your own tools and testing gear

Need to get kitchen benchtop,cook top and cupboards vinyl wrapped.

AEG gas cooktop about three years old. The largest burner is slow to light and once lit it does not stay alight when the knob is released. If Friday 25/7 is not suitable Monday, Tuesday or Wednesday of the following week would be suitable.

Cooktop installation. The new one is different size and require to cut benchtop

My new cooktop doesn't fit the existing hole. It's tight in one dimension (the depth dimension, meaning front-to-back) and needs to be increased by up to 1 cm. The benchtop material is stone as shown in the pictures above and below. Please send me your quote.

Disconnect and cap off gas to cooktop