Find experienced local carpenters in Wentworth Point

Assemble shelf - model is SPACESAVER MK2 Pantry 2 Door All Shelf Purchased from Amart Furniture - see link: https://www.amartfurniture.com.au/spacesaver-mk2-820790001.html?store_id=31&gclsrc=aw.ds&utm_source=google&utm_medium=cpc&network=x&device=c&gclid=Cj0KCQjw3K7RBhDJARIsAKRtP5SAUBOSs7JJNjCbA_tE_3XgNxnmoJQDSQLnD88J332Ve5Uihgr7qMUaAk5hEALw_wcB&adtype=pla&assetgroupid=6560241344&gad_source=1&gad_campaignid=22331501214&gbraid=0AAAAADyU5O9yjYCQkL5rY2bzHJYiwgKtr

I have purchased a few cabinets for my new apartment which will be delivered on 25 May. I need these items to be installed by 28 May.

Looking for an experienced cabinet maker, kitchen installer, or appliance integration specialist to assess whether my existing fridge cavity can be converted into an integrated fridge setup using a sliding door system. The goal is to achieve an integrated look while avoiding expensive built-in fridge options, as they are usually significantly smaller in internal capacity compared to standard freestanding fridges. Prefer: • Practical and budget-friendly solutions • Online consultation or site visit in Sydney

I need two separate kitchen/laundry cabinet doors looked at: Kitchen Cabinet Door I have a sagging kitchen corner cabinet door that hangs above the bench. The cabinet door still works, but it's very hard to open and nudges against the next cabinet door. I don't know if it's always been that way or just worn out over time. I'd like it fixed so that it's easier and safer to open Laundry Cabinet Door I have a laundry cabinet door that was taken out because a new laundry machine's detergent tray hits the upper hinge, making it impossible to use. I'd like to move the hinge lower and door placed back on I'm happy to look at different options to fix these cabinet doors. Job location is Wentworth Point. Suits a handyman or cabinetmaker

We are looking for a cabinet maker who can adjust a wall cabinet so that we can fit a fridge inside. If pictures needed, they can be arranged. - Due date: Flexible

Hey, I am looking to remove a cabinetry trim from under my kitchen bench top as my dishwasher requires the additional height. The material is polyurethane. Only a small section but requesting for a qualified handyman so no damage is made to surrounding areas. Thanks.

I have an empty cabinet - probably around ~4 m x 1.5 m x 1 m. Measurements are just estimates. Need to build shelves inside it. Can bring their own material.

This is a new build kitchen. Wanting to replace shelving with drawers and waste bin Photos: 1. Right side of oven - 1x larger bottom drawer * 2 x remaining drawers at top equal depth 2. Pantry and top cupboard Remove filler panel in pantry cupboard so full width can be used Replace the two doors with one door opening (square edge ) Top cupboard to remain as is - no drawer Top shelf where glasses are to remain as shelf Rest of cupboard to be fitted with drawers 2 larger bottom drawers and 3 smaller drawers above equal size Cupboard next to sink - a double bin and 1 pull out top drawer - using existing cupboard front. Finish on cupboard is Bottega Oak Matt

Looking to get our grey kitchen cabinets and fridge cabinet repainted/coated matte white to match the opposing cabinets.

I am needing someone with the appropriate hand held saw to cut out the red section of this shelf that is under my sink. The pipes are built into the shelf so unfortunately it can’t simply be pulled it out

I’m after getting some commercial grade stainless steel benches and sink for kitchen as per below drawing at standard height 900mm. Please nominate thickness of steel and grade in quote

3 hardwood (High quality blonde Tasmanian oak) - 400 mm thickness for all desks. -60 mm desk grommets Other specifications in attached images. Will sit atop existing cabinetry with appropriate fixings. Facing edges to be pencil edge. Final surface finish (lacquer or oil TBD)

There's a small table that's approximately 50cm x 70cm and it is made out of wood, I applied a little pressure and it has broken, the wood has snapped and I need it fixed. I think it is birch wood. Wood glue would do or any methods to fix it would be appreciated. Now this is the tricky part, I don't want you to fix it, rather just guide me on how to do it, i.e, lend me the equipment you have and guide me on how I should go about fixing it. Please let me know.

I need to remove a pink stain from the carpet, which I believe is from pink ice cream. I already tried to clean it myself but didn't succeed. Can you help me remove it?

I need shelves/ cupboard in laundry and other odd jobs done in my apartment

The kitchen cabinet is damaged. The surface needs to be restored. Price negotiable

I need the attached bookshelf made https://wallmantra.com/products/the-lotus-wood-wall-cabinet-book-shelf-open-wardrobe-white-grey-color/

Custom joinery/carpentry for media wall. Example shown in photos as well as what my wall looks like. Wall length 4.3 metres. Plus or minus fireplace depending on which I can source. Looking for someone to supply materials

Need to build few shelves

I have a dining table and bookshelves that need to be painted/stained.