Find experienced local carpenters in Ipswich

I want some cabinets put in to my laundry and bedroom please Before and after (ai generated) photos added to show you what we have and what I want

Cabinet door above the fridge need to trimmed and also cabinet bottom shelf above the fridge need to be moved bit up to make the fridge fit inside the fridge space

Needing one side if this cabinet re attached correctly. We have tried and it’s not siting right and comes off again.

Hello, In our store, the handle of the left hand cabinet has caused some paint to be scraped off the door. We wanted to enquire about how to permanently resolve this issue with the handle and possibly paint repair on the door.

Waterbased Timber oil supplied by us. Aproximately 90m2 in total to be lightly sandes and refinished

Looking for a carpenter/cabinetmaker to convert my existing open shelving into built-in cupboards similar to the attached mock-up. Happy for alternate ideas. Or building a new cupboard! Would like to reuse the existing unit where possible and add: * 4 tall shaker-style doors * Overhead cupboards to near the cornice * Fill/finish the side gap so it looks fully built-in * Trims/plinth and internal modifications as required Approx. 10ft ceilings, VJ walls and timber floors. First photo is current.

Hi need to make cabinet on one wall 400 hight and 3000 long an. One 800x 800 One 400x 800 over the fridge Product already selected Just need to order with laminex and fit

Description: Looking for an experienced carpenter/builder to transform our covered concrete patio (approx. 40 sqm) into a modern outdoor area. ​Scope of work: ​Floor: Build and install a timber or composite deck directly over the existing concrete slab. ​Ceiling: Install ceiling lining boards (e.g. timber or outdoor-rated lining) over the existing metal roof/beams. ​Lighting: Install basic lighting/LEDs in the new ceiling. ​Please provide a quote for labour & materials (or labour-only if preferred).

New rangehood being installed, bit bigger so will need to be some removed

I need an experienced handyman/carpenter to cut and modify the front section of my laundry cabinet floor board. The cabinet floor sits 12.5 cm higher than the external tiled floor, blocking my robotic vacuum from entering. Work required: 1. Use a jigsaw to neatly cut the front section of the cabinet floor to create a flat entryway. 2. Inspect underneath carefully for any pipes or wires before cutting. 3. Install timber bracing to reinforce both side panels after floor removal, to prevent cabinet deformation and door misalignment. 4. Sand all cut edges smoothly and seal raw wood edges for moisture/waterproof protection (laundry area). 5. Ensure zero sharp edges to avoid scratching the robot vacuum.

Carpentry work for setup a room divider (shown below pic) in wood.

Approx 8 Timber windows need cracked and broken putty removed, replaced with putty or timber beads. Looking for offers per window. I can supply materials if needed

Looking for an experienced handyman/carpenter to help improve a small laundry area in my garage. The laundry space is approx. 205cm wide x 76cm deep. Thinking to install IKEA METOD, I’ll pay for materials. Please quote for labour inc necessary tools. Attached photos for current look and expected look. Got a few other reno areas to be done too.

Need a cabinet maker/carpenter to make me a display and bookshelf. Very similar to the picture attached.

Wooden fencing is bending without support. Need someone to fix the fencing with support

Task: Assemble two Bunnings Practa 1000mm kitchen cabinets with doors. I’m looking for a skilled and detail‑oriented assembler to put together two brand‑new Practa 1000mm cabinets. This is assembly only — no installation into the kitchen required.

Need someone to do framework and build some cupboards inside a horse float. Price for quotes.

I need a carpenter to install timber cornice in a bedroom. It’s a 3 m x 3 m room. We have the cornice already - it’s a timber 66 x 11 mm cornice. Need the corners mitred and lined up - so it looks finished.

Hi 👋 have a standard sized dishwasher I’d like to fit. Previous owner didn’t incorporate a space for a dishwasher… crazy. So require someone to modify cabinet under bench top. Have the cupboard pictured to scuttle - just a collection of bits to be re-distributed. Chasing someone who knows what they’re doing of course! 1) make the necessary cuts and removals 2) do a nice job of it 3) not damage existing counter top 4) dishwasher will be fitted / connected later by a plumber. If this is your gig, and you’re in the area, let me know cheers

Cupboard shelf needs fixing in long 3 sliding doors bedroom cupboard, reinforcement to hold weight and for shelf also. Only 1 damaged of 3 sections, full length to be reinforced. support into wall damaged, length of shelf bending and shelf on one end no longer nailed in. Photo available on request this will not allow me to add.