Find experienced local carpenters in Adelaide

Needing the gyprock sheets removed, timber cut out and replaced, new panels on the floor *price above won’t reflect your rate - quote me

We need two skate park type corners built at the property for a large home made slip and slide. We will cover the corner in foam and tarp but we just need the frame built. It would be best to have someone come out to measure and quote costs etc. Picture for rough reference.

Need Kitchen installer For brand new double storey house Located in athelstone Photo is just for reference Need to install like a photos I have unassembled panels and everything

• Construct new rear fire party walls (60/60/60) with Fyrchek + R3 insulation • Frame varied-height cooking station walls • Frame new & existing doorways • Prepare support framing for ceiling-hung wine cabinet [B]

My Wooden Bed's side bit became detouched. Need to fix it with nail & liquid nail. Also one of the doors handel become loose and need to be fixed

Frame has wood rot, fill and paint

Two sets of floating shelves in mid century style One floor to ceiling where a doorway used to be. Total approx 8 shelves of 1500x300 Another integrated with a new fireplace mantle (mantle 150x1450) with adjacent shelves 450x1650) Ply with veneer likely material of choice. Needs to look custom built/ bespoke/ quality consistent with the rest of the house (restoring mid century)

Please quote for wood rot in post and beam of verandah, also bottom of a garage door. I will have a painter finish the job. Budget flexible as I’m insure of the scope of work. Thank you!

As pictured timber under gutter has rotted and needs to be replaced. Electricity mounting bracket to be fitted. Approx 5 meters.

I am fitting out a small 30sqm commercial kitchen in Adelaide for a fusion dessert & light-meal shop. The kitchen has open flame cooking， so this job is structure-only carpentry, very budget-focused. Scope of work: - Fire-rated partition wall (timber frame + fire-rated plasterboard), to ceiling - Basic non-fire-zone carpentry only (no work near open flame) - Simple bulkhead / ceiling concealment if required - Basic service window / opening framing (structure only) Important notes: - This is a council-inspected commercial kitchen - Fire-rated materials are required - No custom joinery, no decorative finishes - No stainless steel work required (handled separately) Requirements: - Experience with cafés / takeaway / commercial kitchens preferred - Must have Public Liability Insurance - Please provide photos of similar work if available Location: Adelaide Timing: Flexible, but ready to start soon Budget: Tight / cost-focused

Hi, I’m looking for a skilled carpenter / joiner / cabinet maker to design and build a custom front table / counter for my market stall. I’ve attached a reference image to show the general look and style I’m aiming for (modern, timber and black, clean and professional), but this needs to be purpose-built for real market use rather than decorative furniture. The table needs to be collapsible or modular so it can be packed down and transported easily. It must be lightweight enough to move, but strong and stable enough to comfortably hold a pie warmer and basic service equipment — it cannot be flimsy. Minimum depth required is 50cm. Total length will be approximately 2–3 metres, and I’m open to advice on the best modular layout. It will be freestanding inside a marquee and needs to sit level on uneven ground. Materials would ideally be timber (or timber-look panels) with black structural elements, finished cleanly and professionally for food market use. The front panel should allow for a logo to be added later (likely an acrylic sign). I’m open to modular sections rather than one long piece, and I’ll need space for staff entry/exit at one end. Happy to collaborate on practical improvements — function is just as important as aesthetics. Please include any relevant experience or photos of similar work, a rough price range, estimated build time, and any suggestions you think would improve the design. Thanks, and I look forward to working with the right person.

need a shed cupboard approx. 3.5 meters long 0.75 m. deep and 2.4 m. high with a roller door on the front

I have a kaboodle laundry being delivered next week and need it installed. It was designed by bunnings and all parts will be supplied. The install is on to floor tiles and cabinetry fixed to masonry walls. I have put in a nominal figure expecting quotes to be received back. please review attached docs for details. bench top is not ready. please do not allow for benchtop install.

Two external doors fitted with new handles and locks. Two door handles repaired.

Need to adjust existing kitchen cabinets to fit a dishwasher

I’m looking for a carpenter / joiner / cabinet maker to design and build a custom modular U-shaped timber bench/counter for use inside a 3×3m market marquee. The bench will: • form a U shape around the inside perimeter of the marquee • be made of multiple straight sections that connect together • have angled corner joins so sections meet neatly • include fold-down / collapsible legs for support and easy pack-down • be designed for frequent setup and transport at outdoor markets I have reference images showing the style and functionality I’m after. This is a custom joinery project, not a flat-pack or handyman job. Happy to discuss materials, design refinements, and whether this is best built in a workshop.

Repost for Carpenter /experienced handyman - my fridge is too tall for kitchen cabinetry so I need the small upper unit removed to give approx 5cm needed height. Then using the timber base from that unit install one shelf in the space that I can use for cookbooks etc.

Need a few internal doors trimmed at bottom due to new carpet laid.

I need space for dishwasher. Have removed cabinet doors and all visible screws but seems right side glued to the finish panel or has invisible screws. Need help to remove the cabinet without damaging benchtop and finish panel. Also drill holes for dishwasher to use.

I have a table in a shed in a house we have sold. Just need the table removed and disposed of as you see fit Tried to give it away for free on Facebook market Place but no takers We will not be around as are Overseas at the moment. Happy for whoever takes the job to rem ove it whole or bring a power saw and cut it into pieces Both the shed and garage are open. There is power in the garage for a saw if required Job just needs to have been done prior to OCT 2