Find skilled builders in Sunshine Coast

garden shed installation

Need quote for: Extension of existing driveway Small existing wall to be removed Concrete matching existing one - see photos Rough surface is 14m2

I need someone to unpack and put together 3x3m aluminium louvered pergola.

I have a 3m x 1.75 m narrow slider easyshed that needs assembling on our concrete path. I have concrete fixings.

Looking for someone to assemble and Easy shed bike shed. Have the instructions, just dont have any of the tools. Was under the impression when bought it would have some pieces already predrilled

We need a kerb lowered to get into our driveway. Needs to be to SCC specifications with reinforced concrete finish approximately 4-5m long kerb. Kerb needs to be cut down first then reinstated for us as per above to drive over. Please dispose of old concrete. Flexible on timing.

driveway shade sails supply and install 5.6m x 5m Rectangle Shade Sail - Rainbow Shade z16 fabric. attach to house with 2 posts at the rear to secure.

Odin XL cold plunge is freezing over from inside walls outwards. It is dropping below the specified temperature and continues to drop until it freezes. Flow seems to be sufficient and motor is running

I need soil and some brick/concrete rubble removed from my property

Exposing aggregate concrete 70 sq driveway / level up / foot path removal Please give quote

Cut the gutter for a driveway

Extend an existing Ausdeck pergola roof. Say 5x1.3m, connect to existing house gable. Extend existing beam and install 1 new post, 75mm insulated panels , fascia and guttering. Price could be for labour only. Would need assistance to create material order.

I'm at the final stages of a composite deck build. I’m looking for someone with a track/plunge saw to do a few long straight cuts of the the installed decking boards for installation of the breaker boards. Exactly the same as in this video (1:30min) https://youtu.be/DUe_4vljVYY?si=C2QOE3ecdNdT_Wl3 In total, there are 4 cuts at 6 meters length and 1 cut at 2 meters. Precision is key since the breaker boards need to line up with the edge of a garden bed. Therefore, I am looking for someone with experience doing this sort of thing. I don't trust myself doing this with a regular circular saw!

Acid wash and seal new concrete driveway. Approx 130sqm

Some rotten beams and external door. Suffit has fallen down!

Needs some excavation and plain grey concrete for approximately 55m2

I have ordered an Easy Shed. Details below. I need to erected on an existing concrete platform on the side of my house. SIZE: 2.25m x 4.5m Workshop Shed - Monument / Tall - 2.35m Items ordered Monument / Tall - 2.35m Louvre Window Additional parts to add an extra double door on the other 2.25m side Sheeting Parts - Monument Channel Parts - C777 Channel Parts - C1575 Channel Parts - C2040 Channel Parts - C2255 Custom Parts - Jambs - J1230 Custom Parts - Jambs - J2040 Custom Parts - Jambs - J2100 Custom Parts - Gable In-Fills - EGABL23-OW EDP-OW - Door Plate OFF WHITE

Grind down concrete lip on driveway which adds developed over the years due to a crack and movement. Lip is about 80 mm tall and 3 meters wide would need to grind back about 200 to 300 millimeters length to make bump and driveway as small as practical. Can you use tap if you bring your own hose on site to minimize dust and manage runoff which would need to be claimed up sprayed down nearby drain. Would probably need something more substantial than just a average size angle grinder. Could also use PowerPoint on house about 20 meters away.

Hi…I have an EzyShed and slab is ready …I just need a carpenter /Shed assembler please on the Sunshine Coast 4557 QLD.

I'm 2/3 of the way through putting together an Easy Shed (2m x 1m) but I resign! All walls and roof constructed and doors on their way to being put together but need hinging, putting into frame and then assembling the pieces together. And I don't have a riveter (which it appears you need) I can be present to help hold panels up! Don't imagine it would take much more than an hour for someone who knows what they're doing (and the right tools)