Find a local excavator service in VIC

I want to run an irrigation line on the other side of my driveway where there’s no water, the distance to to dig under is about 4 m. I want to run a 25 mm water pipe.

I have a timber post on our back deck that looks like it has a hole. It looks like some sort of insect has bored its way in. I am hoping it can be treated then repaired. I have wood stain.

I am looking for a quote, for foundation of double garage build. Site is about 7.4m*7m 1. Drill ~10–16 piers, depth ~2.5m each. Spoil to skip 2. Place reo cages into piers. Tie reinforcement mesh and bars for slab/edge beams. 3. Place/vibrate pier concrete. Pour ~7.4×7m suspended slab, finish smooth. Slab thickness: 120 mm Edge beams: 250 mm deep 4. Install perimeter ag drains, Connect to stormwater. Grade soil away (1:50).

Bore a 25mm diameter hole under the entire width of concrete driveway. Driveway is 3 meters wide

Need to treat borer ..need quote for best treatment .

I am looking for a quote, for a concrete slab and bored piers. 100mm thick for the slab and plain concrete. And need bored piers for the slab support. Job location is in Sunbury.

Pre-purchase property. Building inspection report - Roof Framing Defects - Borer damage and infestation present in roof framing. A qualified pest specialist should be engaged for advice and recommendations and treatment.

Need 5 post holes bored. 300mm wide by up to 1.5m deep depending on where we find clay. Access is easy, it's for a side fence along a footpath, can access easily from either the footpath or property side. Soil report shows fill in top layer, hence the depth. If clay is closer to the surface, then only need to go 800 into clay, if not, then 1500.

Need holes through double brick walls on both sides of building , I need this done for my 90ml Overflow pipes from box gutter Will be roughly 2.5m -4m off the ground , I can supply scaffold for safe working conditions. Need a quote

I need someone to bore a horizontal hole from one garden bed to the other - 2m apart. Hole diameter needs to 30mm - enough to run a thin 12v cable and 19mm irrigation line through.

3.5 meter long 25 cm wide bore required at 40-50 cm debth.

Need a bore water pump assessed and repaired. On a property with horses, needing bore water pump fixed ASAP.

I am planning to put a new smart lock however I need your help to drill a new bore on the door and yes, you the smart and trustworthy handyman help me on this project.. Message me for a reasonable offer please thanks 😅

Inspection of timber flooring in Victorian Terrace (pre-1900s) due to suspicion of timber borers.

We have STA-RITE model 30S4ET-02 bore pump in good condition. We were running from a generator. Bore depth is 50metres, and once above ground the water needs to run 150metres and up 6 metres into a tank. We are aiming for 15,000L per day. We have 25 metres of water in the bore, and we don't anticipate that we will have a water shortage in the bore.

Steel bars, circular LIGs and binding wires are provided. Manual binding tool can be provided.

Hi, wondering if any woodworkers have access to a horizontal borer machine? I need some neat holes drilled into a floating shelf to accommodate some round 16mm x 200mm brackets. Happy to come to you with my shelf and drop off or wait until job is done. (Hole is 16mm in diameter)

Boring under driveway for water pipe through, the driveway is around 3 meters width.

A section of 4-5 meters of bearer has been borer damaged, need to be replaced. Accessible from the subfloor with a height of 1.3-1.7m.

I need someone to assemble a tall cupboard for me