Book a professional blind repair service in Bondi

Install roller blinds to inside window - mounted to concrete

The ball chain for my blind has popped out of the side winder. It appears the blind would need to be taken down briefly to fix the problem. Would be less than a 15 minute task

A roller blind in my bedroom has come loose from the roller tube — the fabric has slipped off the fixing strip and the blind won’t roll properly. Needs someone to take the roller down (unclips from bracket, no tools required), realign and reattach the fabric to the tube, and rehang it.

Install 4 large roller blinds, including drilling the brackets that hold the blind.

Assemble and install 5x Fridan ikea blinds (noting that some of the blinds will need to be cut to size - width only, no need to adjust the length ) and 2x sets of ikea curtains including install a curtain rod in two bedrooms

Remove existing curtain rails x 3 (simple screw) Install new Roman blinds x 3 https://www.blindsonline.com.au/roman-blinds/20652/bijou-linen-white.htm

Looking for someone to hang 2 x 150cm blinds, I have the screws but I don’t have a drill. Ceiling is concrete. I have a step ladder as well.

The measurements are 1.7m long x 65 cm wide. Roman blind. It doesn’t go up fully. I need this job asap.

Hang 3 new roller blinds - you’ll need your own ladder

Photos attached - one blind is stuck and cannot be pulled down; second blind - string is broken

90x137 timber Venetian blinds attached to cement wall. I in kitchen and I in living room.

I’m looking for an experienced person to make me 3 or 4 Roman blinds using materials that I already have. There is one set of windows that are about 3.5m long and 1.2 ish high that probably require two sets of blinds (hopefully two will be enough). And then a smaller window 50cm by 1.2 ish in the same room that also needs a blind. I have attached photos of the two windows and the material. I am in Waverley.

Need installation of two large roman blinds and 5 smaller roller blinds. The roman blinds and one roller blind are recessed inside window frame and the 4 smaller roller blinds with hang from ceiling.

We have 2 x Ikea Fridans blinds 185x195. We need them cut down to fit our 175cmW window and then installed (installation is very basic). Windows need existing blinds removed too.

Want a quote to fix blind panel Bondi

We replaced our rear sliding doors. The new ones are 60mm narrower than the old. That means the 2 old roller blinds need to be cut back 30mm each then installed

Replace 2 motors on my electronic blinds.

Task: Fix Roller Blinds (Broken Bead Chain) Hi, I need help repairing a roller blind in my apartment. The bead chain has come off the roller, so the blind can’t be raised or lowered properly. The job will likely require: • Taking the blind down to repair or replace the chain mechanism • Reattaching and ensuring the blind operates smoothly again The blind is mounted above a standard-sized window but is difficult to remove from the wall mount see photo). Please bring any tools or replacement parts needed. Looking for someone experienced with roller blinds/handyman work. Thanks!

I need someone to please fix and put up some blinds.

One of the cords snapped in my Roman blind, so unable to raise it evenly. Another Roman blind is locked as it’s been raised too high by my child!