Hire a trusted appliance repair service in East Brisbane

Please check filter and drainage

Lg dryer wont turn on, light is on inside the barrel.

Refix Electrolux dishwasher that has come loose from cabinetry. I need my built-in Electrolux dishwasher refixed properly. It has come away from the cabinets and now tips forward when the bottom rack is pulled out. The benchtop is stone/marble-type material, so I do not want anyone drilling into the benchtop. It likely needs to be side-fixed into the adjacent cabinet panels using the correct brackets/spacers, or reinforced with a small timber/plywood fixing strip if the existing cabinet side panel is too damaged. The current side fixing points appear to have pulled out of the white cabinet side panels and it looks like someone tried a couple of times. It doesn't look to have side fixings etc so this might be needed. Model: Electrolux ESF97400RKX

Need someone to look at my fish finder. It turns on for a split second then off. Common faults, on/off switch/ voltage drop

Fridge got disconnected but closed tap leaked (soaked through the walls). Can be slightly closed to stop leaking but needs to be properly replaced or repaired. New fridge coming on the 14th may.

Coffee machine is leaking - needs service and repair where necessary

My dryer is making an awful noise.. it comes and goes but mainly just makes the noise - lubricating it seems to work for a very short amount of time. Possibly the belt needs replacing (no idea tho). It’s a Speed Queen - commercial Heavy Duty dryer. Let me know what you need on the day to fix it and I will do my best to have it here ready. Trying to get this done as cheaply as possible 🤞 Thanks

I was in the process of replacing the door seal (rubber gasket) on a front loader, but the water inlet hose/valve at the back snapped while pulling the machine out. Jobs needed: * Replace/install new door seal (I have the part) * Fix or replace inlet valve / reconnect hose (part may be needed) Machine is already partially disassembled (top off). Looking for someone experienced with washing machine repairs who can fix this properly and safely. Ideally today or ASAP.

My Hisense fridge has stopped cooling properly in the top section. The first two shelves are warm, while the lower section/freezer is still working normally.

Hello, Commercial adande needs repair, It’s dropping the temperature alot

Hi I need help with fixing my oven tripping immediately when the power is on.

Need my Ryobi 36v electric lawn mower repairs dog has chewed throttle cable and needs replacement Type of gardening: Lawn mowing Size of garden: Under 50m² Has green waste bin: Yes

Vintec wine fridge has leak and no longer cooling effectively. Refrigeration mechanic required to identify leak - replace copper line and re-gas. Qualified trades only

Tire Repair For My Lawnmower Tire

I have a mini mover 12v jockey wheel that needs repair. Currently not operating

I've recently inherited mum's mower that she bought since brand new approximately 2008 and it has sat in a shed since 2015.  It Run fine but hasn't ran since I've got it back, new battery and it started to crank but poured fuel out the back. Triied to fix it thinking the carburettor was jammed and that's why it wouldn't start, bought a new carburettor that was suitable for the unit and placed it on and it's still pours fuel out. new starter solenoid. I've still got all the parts (as in bolts etc from it coming apart) but I'm looking at just getting it serviced and maybe rectified to bring it back online.  Happy to pay someone even in person to just sort it out appropriately

Ride on mower deck bent in towards blades. Needs to be bent back out so blade can spin freely.

Haier 8.5kg Inverter washing machine has been randomly beeping through the cycle for about a week, yet still completes the cycle of washing the clothes well; I did my own research and I checked the following - water flow working well; no kinks in the pipe; out of balance ruled out; cleaned the filter and found a tiny rock and a bobby pin. After cleaning the filter and removing the obstructions, it still continued to beep. I don’t know what else to do, as I’m not getting any codes on the panel. It feels like there’s some sort of sensor inconsistency. I don’t know how to fix that if my hunch is right. Looking for offers.

Our gas heater has a door covering the electricals. It should easily lift, open and close but we opened it this morning and it is now its stuck open and we can't close it. we're worried about the exposed electrical. Please repair so that it again opens an closes. Many thanks

Issue with draining - can’t open filter cap