Hire a professional washing machine repair service in QLD

Anyone who can fix a loud noisy washing machine when spinning. Everything else works well.

Hisense Washing Machine showing FC1 Error as shown in picture washing machine works fine after 2 minutes of that error displays but need to fix this.

Secure connection required of washing machine water line to tap fitting and also waste plumbing pipes in laundry tub sink to be secured. Fiddly job! All parts required are here.

Washing machine sits on a drawer pedestal and needs to be replaced with new drawer unit

Miele front loading washing machine - WKB130…. Remove old door seal…. Install new door seal…. New seal provided

Washing machine is leaking out the bottom front of the machine, filter clear. Have checked seals too.

2 Hinges of bifold door hiding a laundry area needs to be fixed.

Washing machine isn’t draining properly really need it sorted asap :)

My washing machine rubber seal needs replacement I have the part just need someone to do the installation.

It seems like the pins holding this door hinge on have moved. The door just fell off. Does not seem to be any broken parts. There’s usually good parking out the front in the loading bay. But it can be organised within the building with prior notice. Skytower building on Margaret st

Water tap on the connection for the washing machine is faulty - spins rather than turns off water. Requires removal and replacement.

The small emergency drain hose next to the pump filter has accidentally slipped completely inside the service compartment while I was trying to clean the drain filter. I need someone experienced with washing machines/appliance repairs to retrieve the hose and secure it correctly back in its holder. Machine was working normally before this; no other repair required. Photos attached.

Looking for someone to diagnose and repair my LG WD11020D front-load washing machine. Keen for a diagnosis and quote before any parts are fitted. The machine fills with water but won’t drain, so it can’t complete the cycle or spin. The issue started immediately after moving house (machine was transported upright). I’ve already checked: * Drain filter is clean. * Pump impeller spins freely. * Emergency drain hose works. * Main drain hose is clear and not kinked. * Under-sink drain connection appears correct. * Lower access panel removed with no obvious issues found. I’m looking for someone experienced with LG front-load washers who can diagnose the fault and repair it if possible. Please let me know whether your quote includes diagnosis only or diagnosis and repair.

Connecting the hoses correctly as the removal company staff stuffed it up I’m disabled and find it difficult to reach in to check

I’m looking for someone experienced with washing machine repairs to replace the door seal (rubber gasket/bellows) on my Hisense HWFY8514 8.5kg front load washing machine. I’ve removed the old seal already. I have a new seal ready to go. My partner tried to install it already, but now it’s rumbling loudly - needs to be installed properly.

Offer is for levelling/ balancing of your washing machine and dryer. Will take dryer off to get better access for balancing machine, check all connections and operation of machine.

pickup my new washing machine from depot, install it and take the old one away its a 6kg top loader and pickup is team GE depot brisbane

I need help with several small jobs. All replacement parts are supplied, but you’ll need to bring the correct tools. 1. Clean, refit and securely tighten both car battery terminals. Please bring a proper battery terminal/post cleaning brush, basic spanners or sockets, gloves and suitable terminal protectant if you use it. 2. Attach the supplied battery monitor fork connectors to the battery terminals. Basic spanners or sockets will be needed. 3. Replace both supplied bonnet gas struts. Please bring a safe adjustable bonnet support or prop, plus a small flat-blade screwdriver or pick for releasing the retaining clips. 4. Refit the loose outer door-seal retaining wire/spring ring on a front-loading washing machine. Please bring suitable spring-clamp pliers, long-nose pliers or other tools normally used for fitting these retaining rings. 5. Level and stabilise the washing machine using four supplied adjustable anti-vibration/levelling pads. Please bring a spirit level, adjustable spanner and anything needed to safely raise or shift the machine slightly. The dryer is stacked on top of the washing machine, so care may be needed when levelling it. No vehicle diagnosis or major appliance repair is required. I’m looking for someone practical who already has the tools and experience for these straightforward fitting, cleaning and adjustment jobs.

Washing machine has just been connected and it says clear filter. When I did, water gushed out. I tried again and I think the water isn’t draining from the washing machine..

Meet me at Good Guys Pimpama to collect. Instal new one and remove old one. Good guys is located 4 minutes from my house.