Book a trusted oven repair and installation expert in West Footscray

Remove non-structural wall from cavity around oven spave. See images for details. The pink crosses are the 2 parts of the wall i would like to remove. The inside of the wall is a thin sheet metal - perhaps steel. The outside of the wall is a masonite like plaster board. I will be installing a range hood in the empty space. Please provide a quote. Ideally to be completed this friday 22/9 or this weekend. Can also be done Wednesday or Friday next week. - Due date: Needs to be done on Friday, 22 September 2023

Cut wire to disconnect old oven. Safely tape old wires. Please provide a quote. - Due date: Needs to be done on Saturday, 9 September 2023

Disconnect and cap off gas oven. Preferably done today if possible. Budget is $125. I have another airtasker confirmed for this job but unfortunately they can no longer help today. I'll still get them to help if i don't have any luck finding someone this weekend. - Due date: Needs to be done on Saturday, 2 September 2023

I need an electrician to install a new euromaid 54 cm electric upright oven abs disconnect and dispose of old one Oven on order so flexible with date - Due date: Flexible

Provide and Install anti tilting or chain device for free standing stove oven. - Due date: Before Saturday, 1 April 2023

Heating element of Blanco oven need repairing. I believe the model is BOSE63. Grill, fan and thermostat in the oven work fine just. However it doesn't heat up when put onto the normal fan-forced option. - Due date: Flexible

My oven fan turns on but my oven does not heat up - Due date: Flexible

Need to replace failed thermocouple of a GLEM oven in West Footscray.

Hello, would like to replace my old gas stove top and oven with another one I bought. Stove gas Electric oven Range hood. Have all required materials, although if needed happy to drive to Bunnings to get more supplies. Disposal of old equipment is not required Location west Footscray Thank you

Require a gas plumber to take out old gas stove and electric oven. I will organise removal later myself.

Hi looking for someone who has experience in installing a woven wire fence for the front of the house. Looking to install two padestrian gates. I haven't purchased the fences and posts yet but planned to. Refer to pics for dimensions and pictures of front yard including a photo of woven fence as an example

I have a 60cm electric oven to be installed under the counter in the kitchen to replace the current 60cm electric oven. Current oven is installed via a 30 amp wired fuse. Switchboard has space for more inserts if required. - Due date: Flexible

Smeg oven 5 stoves cook top, 2 stoves are not working probably. Gas comes out but no fire

Installing a replacement oven & new oven needs a 15 amp plug put on it. Cabling to oven already exists (separate oven fuse in fuse box - see pics). Also, require a compliance certificate so needs to be a licensed sparkie.

Hi, Hope all is well. I have a Fisher & Paykel Built-in Oven OB76SDEPX3 that no longer heats up after performing a Pyro clean. Get F216 error on screen and have tried restarting at the mains multiple times. Can I please have a quote for repairs? Thanks, Mark.

I have a Westinghouse WFEP915SB 90cm pyrolytic freestanding cooker. The oven door is not closing fully. I have replaced the hinges with brand new ones, but they are actually weaker, so I have put the old ones back in. The door doesn't quite close, so the light stays on. I've attached a pic. I am easy to work with and look forward to your quote. I need it fixed this week.

Hi there, I have a Westinghouse GRXR650SNG wall oven. The oven is working but when it is cooking the flame switches off every 20 odd seconds and re-ignites again over and over during the cooking process. During this process the ignition sparks and the flame comes back on, then it will keep repeating this cycle over and over. Normally it is supposed to do this maybe once or twice during the cooking process but it is doing it way too often and something is faulty. I'm not sure if this is a thermostat issue or not but have you seen this happen before? If so would you be able to advise what the cost would be to fix this?

There's already a power source, built-out location and replacement is the same size. We would do it ourselves but the oven's warranty requires a licensed sparkie to do it.

I need 6 oven mitts embroidered. 3 with the word ‘ReciMe’ and 3 with the words ‘Head Chef’. The link to the oven mitts can be found here: https://www.kmart.com.au/product/lemon-oven-glove/3080814. I will provide the oven mitts. I am located in West Footscray, Melbourne - happy to drop off somewhere in metro Melbourne or also for pick up. I need this done by Friday. Must have experience embroidering on Airtasker on otherwise. Thanks, Christine

Need an upright gas oven/stove installed. Need it connected to gas line and install new power plug cable, as the old cable was cut. Easy job.