Book a trusted oven repair and installation expert in West Melbourne

Install Gas Cooktop, Electric Oven & Rangehood Looking for a qualified and licensed tradesperson to install the following appliances in my home: - 1 x Gas Cooktop - 1 x Electric Oven - 1 x Rangehood Requirements: - Disconnect existing appliances if required. - Install and test new appliances. - Gas work must be completed by a licensed gas fitter. - Electrical work must be completed by a licensed electrician. - Ensure all installations comply with Australian standards. - Clean up work area upon completion. I will supply all appliances. Please provide: - Licence details - Relevant experience - Quote including labour and any additional costs Looking to have the work completed as soon as possible.

The oven turns on normally, but after about 5 minutes it stops working completely. Power reset at the wall has already been tried and did not fix it. Details: Tenanted property – access to be arranged via property manager or tenant Need diagnosis + repair if economical Please quote for call-out/diagnosis and likely repair cost if it’s a common fault (thermal fuse, thermostat, fan, door switch etc.) Please include your availability in the next few days.

Kitchen and powder room work required: - LED lighting to be fitted to two pull-out pantries - LED strip to be added underneath overhead cupboards - LED strip underneath four shelves with switch to activate on door opening - Move three powerpoints less than 2 metres each - Install five double powerpoints - Wire two ovens - Fit rangehood and new powerpoint - Wire an LED mirror to a light switch - Install 4 downlights - Install vented ceiling exhaust fan where there is currently a non-vented ceiling fan Note- all walls are exterior and the kitchen and powder room are upstairs. Details shown in the photos.

I need a new 900mm gas top/ electric oven installed and old one removed obviously prior to new install. Point Cook Vic Cheers Licensed plumber required

1. Remove old oven and rangehood and install new timber boards to cover hole of the benchtop where existing cooker was 2. Supply and Install new rangehood which includes it to be flued externally through the back wall Noting New freestanding oven/cooker already installed. Just needing rangehood.

My husband removed the glass oven door to clean and now can’t reinstall it. Model OR90SCG6B1

oven is not working properly and is burning the food. Three of the five burners are not working, with only one of the remaining burners providing a suitable flame for cooking.

Oven disconnected from hardwire for renovation

Need someone to check and fix the * Gas Cooktop: Not all burner are working. 900mm unit. * Electric Oven: Door seal is broken and door doesn't close properly. 900mm omega unit. * Dishwasher: Fisher & Paykal drawer unit, not all fucntion work.

Like-for-Like Electric Oven Replacement & Disconnection Task Description: I need a licensed electrician to disconnect my old wall oven and install a new replacement oven (like-for-like swap). The Job: Disconnect and remove the existing built-in wall oven (Chef Classic model pictured). Install and hardwire the new replacement oven into the existing cavity. Details: The replacement oven is already on-site and ready to go. It appears to be hardwired (there is a dedicated switchboard switch for it).

The power point inside the cupboard next to my oven is stuck in the "On" position and won't switch off. It's a non-clicking (spark-free) switch — likely fitted this way as a safety design since it's close to the gas flex hose. Need a licensed electrician to diagnose and replace the switch/outlet, taking care given the gas line proximity. Photos attached.

I need an experienced carpenter or kitchen cabinet installer to tidy up a built‑in oven cabinet. Scope of work: Build and install a new heat‑resistant shelf directly above the oven to create a usable cupboard space (see photos). Ensure the shelf is properly supported on both sides and at the back, and safely clear of the oven ventilation. Replace/repair the damaged vertical cabinet edges and front trims around the oven opening so it looks neat and finished. Re‑fit or replace any panel sections needed to close gaps and match the existing cabinetry as closely as practical. Check the existing powerpoint and cabling are accessible and safely positioned behind the new shelf. Notes: Cabinet is standard melamine/laminate kitchen cabinetry. Please supply suitable materials (melamine or similar, edging, fixings) to match the existing colour as closely as possible. 30th June or 7th July or 10th July

I’ve just moved into a new house and the hinges on the doors of both my LG inverter direct drive dishwasher , and my Belair oven are dodgy. The dishwasher door drops straight down to the floor and crashes down when I open it rather than staying in one place. The over door is clunky and feels crooked and wonky as I close it but it does close. Not sure what to do to fix these and am hoping there is someone clever on here who has experience with appliance door hinges ☺️

I have a Westinghouse WVE6314DD oven. The outer door glass was smashed and I have already purchased the correct replacement outer glass. I am looking for someone experienced with oven repairs/appliance repairs to remove the remaining broken glass (if required) and fit/install the new outer glass onto the oven door. Location: St Albans, VIC Please provide: • Experience with oven door glass replacements • Your quote • Availability Photos of the oven and replacement glass can be provided. The job is fitting the replacement glass only – no parts required. Oven door glass repairs and replacements are commonly carried out by appliance repair technicians and oven repair specialists

Renovation. Install new oven, secure existing power to wall. Add another PowerPoint for gas cooktop. Rangehood is connected.

Oven is not stopping, seems sensor issue.

Oven doesnt heat up and the door doesnt close properly. Technika brand

Replace existing oven with same size oven https://www.harveynorman.com.au/westinghouse-900mm-dual-fuel-freestanding-oven-with-airfry-dark-stainless-steel.html

Hi, I have a Bellissimo built-in electric oven, model HNTB65XL. It tripped the breaker/fuse, and after switching it back on the clock and oven fan still work, but the oven does not heat properly and the grill is not working. I'm looking for someone with oven repair skills/experience.

Standard 60 cm oven and rangehood, old needs to be removed and new ones have been ordered which needs to be installed.