Find professional window and door services in Geelong

Installation of 2 x replacement door handles

Need to create a door opening by cutting part of a concrete load bearing wall Size 1300mm x 2000high Engineered drawing has been done With double lintel beam and posts Acrow props to support roof prior to cutting

Will need new electric door installed might need a new hole drilled And also replace hinges on pantry door as it is on a lean Have the hinges for the door and new electric door. You just might need tools

Need a cat door installed into glass door. Thanks.

Garage door come off from the rail,

I have had to replace my bedroom door but need help hanging it.

I need someone to get a cheap door to fit and install it as well as install a dog door that I already have. Doesn’t need to be a painted door.

This is for an initial site visit to measure and selecting the right materials. I need an experienced handyman to help with doors installation at my place. I have purchased 2 doors. I'll need this to be done asap so please only apply if you have the skills and time availability. One is a lounge area door (need a hinge door), and one is an ensuite door (need a barn sliding door). Best to come first for a site visit. For the lounge/office, the height of the opening is approximately 2.3m, the width of the opening is approximately 98cm. For the ensuite I'd like to have a sliding barn door. A hinge door won't open nicely inside. The height of the opening is about 2.3m, and the width of the opening is about 78cm. You'll need to supply the frames, plaster, paint, etc. I will provide the doors. Materials cost will be reimbursed.

Hi need a help to fix back sliding door at my house.

Toilet roll holder partially pulled away from paster wall. Door stop pulled out from internal door. Initial installation poor quality, both need to be attached with improved stability.

Replace plaster above door and window. Old brickwork to adhere to. Approx 6200 long x 560 high. Just over 4sqm including strip between door and window. Prep ready to paint

I need to have the silvertop ash battens removed and stored neatly in the shed. Then I need to have these steel mesh grids installed, and a frame on top to match the fence out the front

Cut and fit new mesh within our existing fly screen door.

Just needing to put a handle on our new from door and install it Today if possible can pay all 💵 We are in corio

Require a new piece to be put up and also will require staining, etc.

TASKS: 1. Reattach outdoor blind to bracket. (If not possible or it is broken, then just leave it and tie up with string). 2. Open four outdoor blinds/shades. They are down. (I do not have the long stick to open them, so you'll need to use any tool you have.) 3. Remove from site a small amount of rubbish around the deck; per photo (a camp chair and small rubbish). EST. TIME: 20 minutes. TOOLS: Spanner or similar to turn those blind knobs. LOCATION: Ground floor outdoor commercial building on Western Beach Rd near The Carousel. Location provided on acceptance.

Install roller catch bolt in my front door

I have a flyscreen on a sliding door that has become detached and needs fixing. Similar fix needed for the screen on one sliding window. I also have a hinged kitchen cupboard door that has become detached and needs to be screwed back on. Ideally want one person who can do all three jobs.

I need a new door out on - just the cheapest possible.

Garage door needs to be re-fitted. I believe the frame is the issue. Door knob and strike plate to be installed (parts supplied) I'll be available this Sunday morning 30/11 for you to inspect.