Find a professional hot water system contractor in Latrobe Gippsland

Fill in a short form and get free quotes for local hot water system contractors in Latrobe Gippsland


Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated hot water system installers near me

What is Airtasker?


Post your task

Post your task

Tell us what you need, it's FREE to post.


Review offers

Review offers

Get offers from trusted Taskers and view profiles.


Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Latrobe Gippsland

Plumbing - rough in shower and hot water


Mirboo North VIC 3871, Australia

3rd Jul 2022

Rough in a shower and install 30litre electric hws

Help move a 315 litre hot water system


Korumburra VIC 3950, Australia

28th Nov 2021

help move a 315 litre hot water system from Wallan, and delivered to Pakenham , the Unit must remain in the upright position and not layed down for transport .

Valve replaced on hot water service


Traralgon VIC 3844, Australia

9th Jun 2021

Vulcan hot water service needs release valve replaced its constantly running so hot water system always heating up costing a fortune.

Fix 2 dripping hot water taps - NOT JUST WASHERS!


Morwell VIC 3840, Australia

17th Nov 2020

The hot water tap in my bath, and hot water tap in my shower, both drip and take an enormous amount of strength to turn off. All plumbing was new in our house (house rebuilt) in 2012. Washers have been replaced many times with improvement only lasting only a day or two. Complete taps have been changed in the bath. No help. I DO NOT simply want washers changed again! And I don't want soft washers again (have tried regular washers and soft washers - no difference to the drip. I don't like soft washers because you don't know when the water actually starts coming e.g. if you have cold water running and want to add hot water). This problem has been going on for years. The shower tap since we built in 2012; the bath tap since about 2018. Strangely enough, since we started bathing all the time, the shower tap has improved; and when we were showering all the time, the bath wasn't so bad. But I need both fixed. My husband finally agrees it's a problem. Yay!

Please fix my hot water service.


Morwell VIC, Australia

9th Jul 2020

Hi there, I think my hot water system might be on its way out, I can’t afford a lot right now, but if someone could please have a look at it & possibly fix it? Many thanks.

Prompt service! On time! Highly recommend!!

Need plumber to connect hot water system


Corinella VIC, Australia

5th Jun 2020

Hi I need a plumber to replace a 350L with a 125L hot water system today(brand new). The job is ground level and easy to get to. I will have the hot water system already there late this afternoon.

Electric hot water not working


Rhyll VIC 3923, Australia

27th Dec 2018

Electric hot water system needs to be reset.

Check hot water system


Drouin VIC, Australia

12th Apr 2022

Hot water not working, also need taps replacing - Due date: Needs to be done on Tuesday, 12 April 2022

Rinnai instant hot water unit to be installed


Morwell VIC, Australia

15th Sep 2021

Need the exisiting unit removed and new rinnai instant hot water unit installed. Existing unit sits inside.

Hot Water Tank Removal


Lakes Entrance VIC, Australia

28th Jan 2021

Hot Water Tank Removal for scrap metal.

Hot water unit changed over


Moe VIC, Australia

7th Oct 2020

Current gas hot water unit to be changed over with new gas hot water unit.

Replace 50 liter hot water service


Fitzroy North VIC 3068, Australia

3rd Jul 2020

Replace 50 liter electric hot water service - 2nd hand or brand new for one bedroom apartment Location is in heart of Moe 80 mins drive from Melbourne Understand price will vary if brand new or secondhand

Replace Hot Water system


Corinella VIC, Australia

5th Jun 2020

Hi we have a ground level easy to get to electric hot water system and need it replaced with a new 125L electric hot water system we have bought a brand new single element one and just need the job done asap. Thanks.

Move electric hot water service & heat pump


Kalimna VIC, Australia

16th Aug 2022

Move the electric hot water service& heat pump from veranda to side of house - Due date: Flexible

Look at hot water service


Drouin VIC 3818, Australia

13th Jan 2022

Small spray coming from pipe. Still have hot water. Needs to be looked at

Rinnai Infinity Gas Hot water service 'Fitted'


Moe VIC 3825, Australia

29th Jun 2021

Infinity 26 Outdoor unit - New & at Location. To be connected to existing Gas and Water lines at weatherboard home in Moe Note requires electric point also - Non Avail - so quote must be for Maybe just Gas/Water or Both ? please stipulate Must be qualified tradesman Note two weeks - Flexible - from date listed avail.

Hot Water Unit Replacement


Bairnsdale VIC, Australia

3rd Dec 2020

Electric Hot water unit to be replaced for a heat pump hot water unit at a residential property by a plumber. Require also electrician to install water proof gpo and isolator at switchboard. Multiple sites, ongoing work

Install my new gas hot water unit/ change it over


Moe VIC 3825, Australia

6th Oct 2020

New gas unit (already purchased) to be installed / changed over from current unit. $200 and you keep the old unit and sell yourself for additional $

Hot Water System - Need Electrician


Corinella VIC, Australia

5th Jun 2020

Hi, We need an electrician to come either today or tomorrow to add a isolator switch and connect up the hot water system. The hot water service is brand new 125L and will be there on site. The job is ground level and easy to get to indoors.

Replace electric hot water system


Longwarry VIC, Australia

2nd Apr 2020

Looking for someone to supply and replace existing Rinnai hot flo 315 electric hot water system. Please quote for effort, appliances and supplies will be paid extra.