Find a professional hot water system contractor in Inner West Sydney

Fill in a short form and get free quotes for local hot water system contractors in Inner West Sydney

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Inner West Sydney

"Job done! Thank you"

Fix electrical hot water system

$170

"Great guy very efficient "

Move hot water system

$150

"Great service "

Replace element Rheem hot water

$100

"Lovely, genuine guy - he obviously really cares and takes pride in his work, and did a great job in fitting a slightly bigger water heater into a very tight space. Thanks so much."

Replace hot water system

$1,500

"Paul was very easy to deal with, did the tasks quickly and efficiently and kept me in the loop the whole way! Very professional and recommended!"

Repair leaking sink and leaking hot water system

$100

"Reliable and fast. Thanks Craig."

Rheem hot water tank servicing

$50

What's the average cost of a hot water system installer in Inner West Sydney

$100 - $247

low

$100

median

$150

high

$247

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Inner West Sydney

based on 39 reviews

4.92

36
3
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Inner West Sydney

Gas install, stove and gas hot water connection

$1,200

Annandale NSW 2038, Australia

18th Aug 2022

Install gas line under house. 56cm of clearance under floor. Dirt will be removed and concrete patio cut to allow for install from main to under house. Supply and install copper and fittings. Three points - Gas Stove, BBQ and Gas Hotwater (Rinnai 26L instant) Connection of the Stove and provided Gas Hot Water unit - Due date: Flexible

Fantastic job by Mark at a tough site. Would highly recommend.

Fix hot water machine

$50

Enfield NSW 2136, Australia

19th Jul 2022

Need help fixing hot water issue, the water is sometimes cold for a few seconds (while hot water is running) - Due date: Flexible

Got the job done

Take old hot water tank

$75

Concord West NSW, Australia

24th May 2022

We have an old hot water tank We need someone to remove it You can take it to any scrap metal place and they'll take it It is heavy but we have hands to help - Due date: Before Friday, 27 May 2022

Quick, efficient and no bs

Hot water system replacement

$400

Canterbury NSW 2193, Australia

16th Mar 2022

Replace indoor 250 litre Rheem hot water system - Due date: Flexible

Hot water tank replacement

$5

Drummoyne NSW, Australia

2nd Jan 2022

Replacement of a 315L hot water tank. Easy access.

Hot water system leak

$50

Annandale NSW 2038, Australia

1st Nov 2021

Hot water system is leaking - Due date: Before Sunday, 14th Nov 2021

Hot water replacement

$50

Leichhardt NSW, Australia

6th Jul 2021

I currently have a 50L rheem electric system that’s not working so would like it replaced. Happy to buy my own system and just pay for installation cost. It’s hard wired and located in a cupboard in laundry. Located in Leichhardt. I’m flexible with dates

Replace hot water pex line.

$280

Dulwich Hill NSW, Australia

14th Aug 2022

The hot water to the kitchen tap takes too long to get there because the run is so long and it’s 20mm pex. I’d like to have a T inserted close to the hot water system and run directly to the kitchen tap (13m run). The current pex run will need to be capped. There is enough room to crawl under the house. - Due date: Flexible

On time and a good job

Service hot water

$100

Five Dock NSW 2046, Australia

18th Jun 2022

Have a gas hot water tank needs servicing hasn't been on for 2 years

Absolute legend,. diagnosed issue without a fuss. Will use again and can't recommend highly enough

Fix no hot water Bosch gas water heater

$140

Croydon Park NSW, Australia

14th May 2022

Yesterday suddenly no hot water - no idea why! Someone to diagnose and fix. - Due date: Needs to be done on Sunday, 15 May 2022

Perfect. Came straight away. Highly recommended.

Install hot water heater

$50

Ashfield NSW, Australia

4th Mar 2022

Install new hot water heater in kitchen. Won’t consider any offers above $200. Please see photos of the new heater to be installed

Electrical Circuit for Hot Water System and ceiling lights installed

$300

Concord NSW, Australia

29th Nov 2021

We need a 15-20 amp electrical circuit to be installed for a how water system. Two story house. The electricity board is on one side of the house the hot water system is on the other side, We also need two ceiling lights to be installed. See attached photos. - Due date: Flexible

Friendly and efficient service.

Take out and install a new hot water system.

$300

Ashfield NSW, Australia

25th Oct 2021

At the moment my hot water system is turned off I have a new one and I want someone who knows what they’re doing. To install the new one it’s an infinity 26 instantaneously hot water system - Due date: Flexible

New electric controllers for existing Rinnai B26 hot water system

$100

Canada Bay NSW 2046, Australia

20th Sep 2022

Original controllers connected about 25 years ago. New hot water service connected about 6 years ago. Controllers have been working till recently. Have purchased 1 new controller to be installed - Due date: Flexible

Water pressure lower on hot water

$100

Croydon Park NSW, Australia

2nd Aug 2022

Water pressure is lower when heater is on. Need to identify the root cause - Due date: Flexible

Hot water issue

$100

Strathfield NSW, Australia

14th Jun 2022

Hot water doesn’t come out Cold water is fine

Install a Hot Water Limiter to my shower please

$750

Annandale NSW 2038, Australia

17th Apr 2022

I need you to install a product that is going to limit the hot water in my shower. The one I have identified by thanks to good advice, is called the Showerguard. I need you to supply the Showerguard for the purposes of completing this task effectively and successfully. I need a plumber/electrician to complete the install in my two storey townhouse please where the shower is located upstairs? I look forward to seeing your bids/offers. All offers will be considered.

Replace Hot Water System (HWS)

$1,000

Lewisham NSW, Australia

4th Mar 2022

Seeking Licenced plumber. To replace existing HWS. Deliver and install (83 litre capacity, 80 litre hot water delivery) Dux electric HWS. Remove old system. Time/ date negotiable. Budget: best offer

Hot water is not coming in kitchen looks like mixer issue.

$100

Homebush NSW 2140, Australia

7th Nov 2021

Hot water not coming in kitchen tap, rest coming every where. seems to be mixer issue. - Due date: Needs to be done on Monday, 8th Nov 2021

Amazing person very friendly. He just did the Job and also saved Money for replacing the Tap.

Hot water issues in kitchen

$100

Wareemba NSW, Australia

26th Sep 2021

Hot water in kitchen only comes on when hot water tap is turned on in bathroom. Looking for a licensed plumber to fix.

Prompt and reliable service