Find an experienced plumber in Hobart

Hi, water is leaking out from the bottom of the shower screen while showering. Could you please check if it needs a new rubber seal/strip and resealing? Also, could you reseal the other side shown in the attached photo, as the existing sealant looks old and untidy.

We require a licensed plumber for residential renovation works in Moonah. Scope of work: * Install a new shower and toilet * Install the required hot and cold-water services * Install and connect sanitary drainage * Relocate the kitchen from one room to another * Install plumbing for the new kitchen sink and dishwasher * Disconnect and safely cap the old kitchen plumbing * Test and commission all completed work The plumber will be responsible for preparing and lodging the required plumbing application or permit with Glenorchy City Council, including plans, approvals, start-work authorisation, inspections, as-constructed drawings and completion documentation. Please provide your licence details, availability and an itemised quote separating labour, materials and Council costs. The property address will be provided privately. A site inspection can be arranged.

I want to swap my old gas cooktop with new gas cooktop.

I have 90 cm cooktop. I want to replace with new gas cooktop.

Need to fix gas stoves in a commercial kitchen asap

Move exisiting toilet Please add your price & any questions, $10 is so airtask will post it

I am in the process of touching up my laundry which will require some plumbing work. I have two sets of taps and a spout to be removed, and be replaced with stop taps inside a new cabinet, I am looking to have someone then connect up washer and new mixer. My aim is to have the new sink in place (I will install, you will plumb in wast) I will tile the wall so cutting plaster is no issue. Remaining cabinets and benchtop will be installed over the coming week.

Remove old discoloured shower silicone and replace with new. Experience/reviews with similar job required.

Remove existing bathroom vanity and install new vanity I’m looking for an experienced handyman/plumber to remove my existing bathroom vanity and install a new vanity in the same position. Work required: * Carefully remove and dispose of the existing vanity. * Disconnect existing plumbing. * Install the new vanity and basin in the existing location. * Reconnect the existing water supply and waste plumbing. * Ensure the vanity is securely fixed to the wall and level. * Seal around the basin/vanity as required. * Check for leaks and ensure everything is working correctly. * Clean up and remove the old vanity/rubbish. Important: The new vanity will be replacing the existing unit, so no major relocation of plumbing is expected. I’m looking for a neat, professional installation with minimal changes to the existing bathroom. I can provide photos and details/dimensions of the new vanity before the job. Location: Howrah, TAS Please quote for labour, and let me know if there would be any additional costs for plumbing fittings, waste connections, or disposal. Please only quote if you have experience installing bathroom vanities and can complete the plumbing connections

Hot water tap “knob” Please see pic and advise how much it will be to put a new one?

As part of a pre-purchase building inspection shower leak was detected by inspector. His notes below; A 100% moisture reading was recorded to the substrate directly beneath the shower, with localised moisture staining visible in this area. The elevated moisture was coníned to a relatively small area, with no widespread moisture detected to the surrounding îoor structure at the time of inspection. No elevated moisture or evidence of leakage was observed around the shower waste connection. Based on the location and pattern of moisture observed, the fíndings are strongly indicative of moisture penetrating through the shower waterprooíng system. The relatively small and patchy area of moisture suggests that the waterprooíng deterioration may be in its early stages. Recommendations Further investigation of the shower waterprooíng system is recommended to conírm the extent and source of moisture penetration. Flood testing.Pre Purchase Building Given the moisture readings and staining observed beneath the shower, repairs to the shower waterprooíng system are considered highly likely to be required. Depending on the extent and location of the waterprooíng failure, this may require removal of shower ínishes to access and reinstate the aìected waterprooíng Looking for a waterproofing professional to review and repair the issue. Please quote removal and reinstall of tiles. Photos of shower and the underneath leak are shown

1. The shower head arm has a swivel/ball-joint connection that keeps disconnecting or coming loose from the wall bracket. Needs the shower arm and/or head replaced (or the connecting joint re-fitted/tightened) so it holds securely in position. 2. The curtain track above the window isn't running smoothly — the pinch-pleat curtains are dragging or catching on the rail, and the track isn't closing/gliding properly. Needs the track cleaned, glides/runners checked or replaced, or the track itself straightened/replaced so the curtains slide freely.

In a need of installation of a hot water cyclinder The placement is a bit tideous as its under the house Please note the budget price as the home owner is a pensioner/recovering from DV.

Fix commercial sink, hot water doesn’t seem to be coming out. And pressure for hose needs fixing, tap is leaking

Pull out original kitchen tap and replace with Oliveri mixer goose neck tap

Looking for a reliable plumber in Hobart CBD 🔧 Need help connecting hot water to a basin—quick and straightforward job. Prefer someone experienced, reasonably priced, and available soon. If you’re a plumber or can recommend someone trustworthy, please drop a comment or message me directly. Appreciate the help!

Looking for a qualified handyman or plumber to install a toilet bidet jet spray in my bathroom. I already have the bidet spray kit (hose + trigger), but I may need a suitable 3-way diverter / angle valve installed (similar to the one in the photo) to connect it to the toilet water supply. Job details: Install bidet spray next to toilet Fit or replace angle valve / T-adapter if required Ensure no leaks and proper water pressure Test after installation Location: Lindisfarne, TASPreferred time: Flexible – weekdays or weekends Notes: Must have own tools Plumbing experience preferred Please include quote and availability Thanks!

My hot water system supplies rusty water, it needs to be drained clean and fixed.

I have a hot water cylinder in the kitchen and want to move it to out of unit behind the kitchen wall ( the kitchen sink is on this wall so plumbing is already there…. Could you please give me a quote?

Toilet door doesn't stay close,opens straight away. Latch doesn't work. Have family coming over.