Find a professional garden bench contractor near you

One of the timber panels has broken. I have a replacement one which needs to be attached to the steel frame and the whole seat needs to be re-painted. - Due date: Flexible

I estimate 2 - 3 hours of sanding required. Air tasker to provide own sander. - Due date: Flexible

Bench is 290x50x100 cm. Have already puchased 1 litre of oil (colour merbau) and 4 lires of cleaner. - Due date: Flexible

Fix tool holder to the wall and assemble a garden bench - Due date: Before Saturday, 17 June 2023

Pick up door within 5 min drive, take off the door to be replaced and put new one on. Assemble 2 new garden wood bench seats currently in boxes - Due date: Flexible

I purchased a garden bench from Bunnings but didn’t put all the pieces together. It’s missing 3 pieces! - Due date: Flexible

I have a 4 tiered garden bed in my backyard. I would like 3 out of the 4 garden beds to be topped with timber to make them into benches. Just need a timber bench made over the top only, using the already made garden beds as the base. On the left and right side of the garden bed there is a small gap between the fences which I require to be covered, only 76x 20cm approx. Summary: 5 x items in total. 1. Far left small fence gap 2. Far left bench top 3. Middle bench top 4. Far right small fence gap 5. Far right lower bench top See images attached. The benches and fence will be later painted white so the wood to be used doesn’t have to be pretty, just needs to match and suit appropriately. Measurements in images are approx. - Due date: Flexible

Restore a Baltic pine table and paint 2 wooden benches white - Due date: Flexible

Sand an older style wood slate bench (iron/stee arms) and paint - rejuvenate! - Due date: Flexible

We have an older chunky wooden king size Bed frame with slats that we would like repurposed into a daybed/garden bench, possibly with storage under the seat but that is not absolutely necessary. It would just be nice if possible. Also painted to go outside, although we can do that if you don’t. We have the whole bed frame and the slats. The bed is in good condition. - Due date: Flexible

Complete assembling garden storage bench box bought from Complete Storage. Assembly instructions are all pictorial, no words. Hinges are not attached and cover is off centre. Also plastic lining needs to be put in. - Due date: Before Sunday, 11 December 2022

Custom made garden bench seats made out of composite decking. I need a total of 3 bench seats. 1 x corner, 1 x small, 1 x large. All measurements are in the plans attached. thanks! - Due date: Before Monday, 12 December 2022

I have a bench box or horizontal toolshed - made almost entirely of wood. The lid of the box is large & heavy. The lid is attached to the rear (southern) wall of the box by four sets of hinges. There are also 2 piston-like closers at each end which provide a degree of control when opening/lifting and closing/dropping the front of the lid. The bench box was constructed in 2007. In 2017, the hinges were replaced with new hinges. The hinges themselves are still in good condition. However the upper halves of the hinges, which are attached to the (southern) rear of the lid, have come away from the lid because the wood to which they are attached has rotted. The top of the external part of the rear wall of the box used to be covered by metal flashing. The part of the flashing protecting the western half of the external rear wall has disappeared. In addition, on its western side, the bench box is located right next to a leaking pond. In addition, in the bottom of the bench box is a pump sump which always has at least a few cms of water in it. The result is that, at least in the current weather, the wood comprising the rear wall of the box is very wet. There is an access problem. The outside rear of the box is very difficult to access as there is only a 6-7 cm gap between it and the fence behind the box – AND there is mature bamboo growing in that gap. As a result, working on the rear wall of the box will require removal of the lid and working on the rear wall from inside the box (noting that a portion of the floor is occupied by the pump sump). The main part of the task is to replace as much of the lid and the rear wall of the box as is necessary to allow the lid hinges to be attached to sound new wood in the rear box wall. I am open to replacing part or all of the wood in bottom (southern) side of the lid with something which can cope with moisture. Also, the piston-closers need to be replaced. - Due date: Flexible

Assembly of a garden bench. We have done one but have run out of time to do the second. Need it done before a party - Due date: Before Thursday, 20 October 2022

I have this old garden bench that my mum got from my grandmother when she passes away, I have got all the wood to replace the old rotting wood, but I need someone to sandblast the metal parts (only the back and the 2 sides) and get the rust off and prime and repaint the metal parts. I think it’s cast iron but not 100% sure. - Due date: Flexible

Old timber garden bench needs the legs reattached and a paint. - Due date: Flexible

We would like an Airtasker to assemble 2 Matrix Planter box kits and fit the accompanying screens, assemble a 2 seater steel garden bench and 2 pieces of office furniture. Please bring gloves and tools ( including a drill)) to assemble the items. - Due date: Needs to be done on Sunday, 10 July 2022

Need a cabinet door repaired and also want to make a garden bench from my fence which i am pulling down - Due date: Flexible

Hi - looking for someone to assemble an IKEA gaming chair and park bench today. Short notice but someone pulled-out of the job last minute. I'm in Narrabundah. Help please... 😊

Bench seat can be easily folded to be taken away to be painted - in fact prefer that. - Due date: Flexible