Find a professional kitchen renovation contractor in VIC

IKEA kitchen installation Cabinets already assembled No plumbing or electrical required Just mounting and benchtop Budget $500-600

Install ikea kitchen flatpack

IKEA Kitchen Installation. IKEA Kitchen Design: https://kitchen.planner.ikea.com/au/en/planner/F96DB19D-CC55-4852-824B-3BACF272FCE9/ Scope of works included in attachments (requires electrical and minor plumbing) . I am price sensitive so willing to demolish existing kitchen and assemble new cabinets to keep costs down.

I have an IKEA METOD kitchen where all cabinets are already assembled and positioned. The remaining work is mainly installation, alignment, and finishing. I initially planned to complete it myself but realised I don’t have the required tools for proper panel cutting, levelling, and clamping, so I’m looking for a reliable installer to complete the job efficiently. Scope of work: • Mount and secure cabinets to wall • Ensure full levelling and alignment (important for upcoming stone benchtop) • Cut and install panels, fillers, and end pieces where required • Build and install bulkhead • General finishing to a clean standard The layout has already been simplified (some cabinets removed from original plan), so the scope is more straightforward than a full install. Laundry (small additional job): • 130 cm space • 1 × 60 cm METOD sink cabinet (assembled) • Install laminate benchtop and sink • To be completed after tiling (can be scheduled separately if needed) Notes: • Property under renovation, easy access • I will be onsite and can assist if needed to keep things moving • Kitchen is ready to go now • Looking for someone who has done IKEA kitchens before and knows the system well I’m after someone practical, efficient, and reasonably priced for this type of work. Location-Belmont – happy for inspection prior to quoting Please include: • Brief experience (especially IKEA installs) • Availability • Quote (or estimate range)

Need someone to remove old.kitchen and install kaboodle kitchen

Looking for an experienced 4WD installer to fit a drawer and kitchen system into my 2015 Volkswagen Amarok. This is NOT a bolt-in job – the install will require drilling and proper alignment, so experience with similar setups is important. Scope of Work: Install Kings 1300mm drawers Install Kings 1300mm pull-out kitchen Install wing kit to suit Drill and bolt system securely through tub floor (no movement/rattles) Ensure correct positioning so drawers run straight and tailgate clears Work around tub liner (cutting or drilling through as required) Key Requirements: Experience installing 4WD drawer systems (Kings or similar) Must understand how to: Align drawers correctly in a non-square tub Drill safely (check under tub before drilling) Avoid fuel lines / brake lines Clean, solid install – no rattles or loose mounting Take care not to damage tub or interior trims Location: Keilor Park VIC Timing: Flexible but prefer ASAP I Will Supply: Kings 1300mm drawers Kings 1300mm kitchen Wing kit You Bring: Tools Drill bits / rivnuts / mounting hardware if required (happy to reimburse) Additional Notes: Amarok tub is not perfectly square, so proper setup and alignment is important Preference given to installers who have done this type of job before 👉 Please include photos of previous drawer installs with your offer

I am requiring a full kitchen renovation - rip old old kitchen, design new kitchen, install etc. Posting on airtaker to see if I can engage with tradies directly rather than going to a company that will just markup the work enormously to pay middle management.

Full Kitchen renovation...

Kitchen Renovation Needed – Cabinet & Benchtop Replacement We are looking for a professional kitchen renovation company or cabinet maker to replace an old kitchen. Scope of work: • Remove existing kitchen cabinets • Supply and install new kitchen cabinetry • Install new benchtop and splashback • Keep existing appliances (oven, cooktop, dishwasher remain) • Kitchen sink and tap can be reused or replaced if needed Requirements: • Experienced kitchen renovator or cabinet maker • Ability to provide design advice and installation • Quote required for supply and install Location: Melbourne Please contact with portfolio/photos of previous work and a quote estimate.

I have kitchen demolished and dismantled and would like to attach to old kitchen(also need to be demolished)

Want to move this part of the kitchen to the left to use up the space where the plant is and widen the space for a fridge. Would also have to put something to connect the cupboard above the fridge to the pantry, maybe small shelfs?

Looking for an experienced cabinet installer to install a custom pre-assembled kitchen in a ground floor apartment. Scope of works: Install medium L-shaped kitchen cabinets (all cabinets pre-assembled) Install small floating vanity Install a couple of small wall cabinets Ensure cabinets are level, fixed securely to walls and aligned ready for stone benchtops. Also requires 3mm template cut ready for stonemason Details: Location: Melbourne Access: Ground floor apartment (easy access) Cabinets will be on site and ready to install. Requirements: Proven experience installing kitchens/cabinetry only Must have own professional tools (laser level, cabinet clamps etc.) Attention to detail and quality finish Please include photos of previous kitchen installs Only experienced cabinet installers will be considered.

Complete kitchen installation. Carcasses done and squared and need bench installed, kick boards on, doors on and sideboards installed. Plumbing completed if possible.

I have an IKEA METOD kitchen where all cabinets are already assembled and positioned. The remaining work is installation, alignment, and finishing. Scope of work Mount and secure cabinets to wall Ensure precise levelling and alignment, especially for upcoming stone benchtop Cut and install panels, fillers, and end pieces as required Build and install bulkhead General finishing to a clean standard The layout has already been simplified, with some cabinets removed from the original plan, so the job is more straightforward than a full installation. Laundry as a small additional job 130 cm space 1 x 60 cm METOD sink cabinet, already assembled Install laminate benchtop and sink This can be scheduled after tiling if preferred Notes Property is under renovation with easy access I will be onsite and can assist if needed Kitchen is ready to start immediately Prefer someone with solid IKEA kitchen experience who understands the system well Location Belmont, happy to arrange an inspection before quoting Please include Brief experience, especially with IKEA kitchens Availability Quote or estimate range Looking for someone practical, efficient, and reasonably priced for this scope of work.

To assist builder in kitchen and help paint walls. Experienced standard please.

We renovated kitchen and need power outlets refitted. There’s 3 outlets on the backsplash and an additional outlet under the bench top. No parts needed just the install. Needs to be done by licensed electrician.

I require a cabinet maker or kitchen installer to assist with the following: - CNC Cut and two-pack paint 10x 18mm MDF kitchen cabinet panels to match existing shaker cabinet profile and colour. - Shift a two meter run of cabinets and install all the cabinet panels, including on integrated fridge and integrated dishwasher. - Cut down or re-construct an 800x800x400 melamine carcass to fit new integrated fridge cavity. Happy to discuss more detail and share images and detailed cabinetry drawings.

Looking for someone with Kitchen skills who can help me upgrade our current kitchen - photo attached. Something similar to - photo attached. Assist me in pulling the old one out, over viewing my choice in 2nd hand Kitchen assembly and installing the new kitchen. The gas stove and the dishwasher and sink will need to be moved to allow for a large double fridge. And the sink moved under the window. Hourly / daily rate preferred (abn only -no gst preferred) until the job is done.

Hi We need an electrician to help with a kitchen renovation. Here the jobs we need done: Install 3 power sockets along side wall 2 x new sockets for existing Install new oven The kitchen is being installed week beginning 8th December. We live in Brunswick. Thanks Victoria

Hi mate, Looking for a electrician to finish a few small kitchen electrical tasks: 1. Install and secure rangehood (switch already there — just plug in). 2. Connect induction cooktop (direct wire from meter already installed, just connect and test). 3. Install built-in oven (10 amp plug-in type, no direct wiring). 4. Move 2–3 switches about 10–30 mm to the side. And check other things. All cabinets are already installed and site has easy access and power on. Please share your quote and availability — hoping to get it done asap. Location: Wendouree (Ballarat area)