Find a professional gate installation in Newcastle

I am looking for a reliable handyman to install one Colorbond side gate. I have purchased everything required for the job; I just need a professional to handle the digging, leveling, and installation. Scope of Work: • Dig & Set: Dig two holes and set the gate posts using Rapid Set concrete (provided). • Install: Hang the gate (1000\text{mm} \times 1800\text{mm}) and ensure it is perfectly level. • Hardware: Fit the hinges and the latch kit. What I Have Provided: • 1x Colorbond Gate (1000\text{mm} wide) • 2x Gate Posts • Full hardware kit (hinges/latch/screws) • Bags of Rapid Set concrete Requirements: • Must have a post-hole digger or spade and a spirit level. • Experience with gate/fence installations to ensure a smooth swing. .

We need to help our neighbour fix her front gate. Possibly needs welding to connect the gate back to the post and a new hinge / bracket

Fix the front gate as it is broken

I need assistance fixing a pole that was hit and resulted in the post breaking from the concrete base. I believe it would be a fairly easy job i just dont have access to a auger or hole digger of any sort. Happy to discuss options. Access is super easy.

Looking for a custom made functional & aesthetic wooden (white or natural timber) baby gate for the top of our steep internal stairs (approx 1.05m wide). Open to swing or sliding options. Photos attached for inspiration.

Remove dent from tailgate

investigate cracking in FOH ceiling

Gate is no longer level so will not latch correctly post is lower fixed to the house gate it attached to colourbond fence

Install dual gate opener - power already at the gate - plug and play model

Fabricate & weld 2x galvanised steel gate frames - Supply and weld 2 x gate frames - Size: 2000mm wide x 1200mm high (each) - Material: RHS, 40 x 40 x 3.0mm, galvanised - Design: perimeter frame with three vertical members and three horizontal members on each gate for strength - Intended for pine slats to be fixed to the face • Fully welded, square, and ready to hang • Zinc-rich touch-up applied to all weld areas Off-site or on-site fabrication ok. Please quote supply, labour, and lead time.

Colorbond driveway gate needs repairing

Back gate broken due to bad winds Bathroom lock is stuck and needs to be fixed

Just after a back gate put in my colourbond fence.

Just moving into.a flat and I need 2 basic dog fence/gate at each end to keep him in and safe. Nothing to expensive or fancy as im on a pension.

Will need 2x base plates installed for 75x75 posts and a second gate post installed for the latch side of the side gate. Concrete surfaces on both but would prefer the side gate to be core drilled/ concrete cut and have the post set at 1800mm flush with the gate. The driveway side is sloping and would require the base plates to sit level so that both gate leafs will close nicely and sit right. All the materials will be provided. Just seeing what the general offers are. Cheers

I have bought a bunnings merbau gate 90mm wide by 1800mm high I have purchased some hinges and a lock. I just need someone to take down the old gate and put up the new one.

Double metal gate on the left side of house, and smaller gate on the right side of house needed installed and fixed. Can provide photos of the areas soon.

Supply and install two gates happy with Pool Fencing height on the right side and standard gate on the left side. I don’t want it to be core hold into the ground so Dina bolts will do. Please have experience into Fixing into Hebal.

I need someone to build my 7ft pool table please Gateshead over the weekend if possible please all in box ready to go

Looking for someone to do the following repairs: BALUSTRADE - Replace two sections of bottom balustrade that have failed/collapsed. The sections are currently chocked up to keep in place but need to be removed and the white palings re-screwed at bottom with new rust-proof screws (the top of the palings are currently attached to the top rail with nails). I have purchased the pre-primed balustrade and painted three coats in matching Weathershield. The lengths will need to be cut to exact size and ends painted before installing. Waste/old material need to be taken away please. SIDE GATE - Rehang gate to original position so closer to side post where hinges are and lift so in line with fence level and attach new latch on right hand side (on inside of property neighbouring side). Moving to the left as originally positioned will allow the gate to close flush and the latch to be installed (as it was originally). Also, re-attach bottom panel (currently sitting next to gate inside property, see pic below). Latch is already purchased. SLEEPERS IN BRICK PATH - Replace rotted sleepers in pathway x 2 sections. One in step and one flush with pathway. Three sleepers have been delivered. Waste/old material need to be taken away please.