Find a professional gate installation in Illawarra

Replace a pool gate including the fixed panel, see attached photo: Replace glass in pool fence 12mm Clear Toughened * Hinged Pane Size 1170x1600 * Gate Size 1170x900 Additional inclusions for the job: • Polaris Soft Close Hinges • Gate latch • Removal of old gate and panel

Looking for a pool fencing installer to replace a section of an existing Colorbond fence with frameless/semi-frameless glass pool fencing, including a pool-compliant gate to match our other pool fence. Scope: Existing Colorbond fence section to be removed: 1700mm W x 1800mm H Replace with glass pool fencing panel(s) across this width, to comply with AS1926.1 pool fencing standards (min. height 1200mm) Within this section, include a gate approx 800-900mm wide, self-closing and self-latching, with the latch release mechanism correctly positioned on the non-pool side per AS1926.1 Ground conditions: one side of the fence run is concreted, the other side is soil — will need appropriate footings/fixings for glass panel posts or spigots on both surface types Existing (non-glass) fence posts nearby are set in soil, for reference Access: Down the side of the house Timing: Flexible over next three weeks Open to quotes

Looking for an experienced fencer to convert a section of my Colorbond fence into a pool-compliant gate, plus fix a gap issue on a neighbouring panel. Time-sensitive — see timing note below. Job 1 – New pool-compliant gate: Current fence panel is 1700mm W x 1800mm H Need to convert a portion of this to a gate, approx 800-900mm W (remaining width to be filled in as fixed panel/infill) This gate provides access to a pool area, so it must meet Australian pool fencing/gate compliance (AS1926.1) — self-closing, self-latching, with the release mechanism positioned correctly on the non-pool side (happy for the tradesperson to confirm exact placement/height to ensure compliance) Ground conditions: one side of the gate opening is concreted, the other side is soil Existing fence posts are set in soil. Current fence colour is Monument, but the fence is about to be repainted Surfmist — if new panels/infill are needed for the gate section, please supply in Surfmist (or unpainted/primed if easier to match after painting — happy to discuss) Job 2 – Gap repair: Separate fence panel has approx 20mm gaps between the panel and posts on both sides This is a privacy issue and needs to be closed up/sealed to match the rest of the fence Access: Down the side of the house Timing: Flexible this week, but the fence is being professionally painted this Friday or Saturday, so ideally this work is completed before then — the sooner the better :)

An aluminium gate installed between a brick wall and a Colorbond fence has come off and is currently lying on the ground. The job involves securely fixing one gate post to the brick wall, attaching the other gate post to the existing Colorbond fence post, and rehanging and aligning the gate so that it opens and closes correctly. The person completing the job will need to bring all appropriate tools, anchors and fixings.

Put up brackets to hang two shelves in laundry (have supplies) Re hinge and hang garden gate (have supplies) Fix loose screws/spot they have been screwed into for dishwasher - need to be longer or adjusted to better fit and stay securely in place Ideally want this done asap.

Needed someone who can weld nos what there doing ,I have all materials needed as well as welder rods etc ..also have 3 did welders. 1 is a mig other 2 stick welders ..must be made strong and study , needed asap..MUST NO HOW TO WELD CORRECTLY.. ITS FOR A HORSE FLOAT SO MUST BE MADE STRONG

I need approximately 3 metres of concrete under double exterior gates and 3 metres of concrete securing pavers in my backyard. These are linear measurements- the pavers in the backyard are separating gravel from lawn. I already have a channel dug out. This is a small job.

Hi I would like a wooden gate made the same design as this one. Measurements - 900 wide by 1.2m high.

Cut out and weld in rust repair in the rear roof of a 105 landcruiser wagon

We need someone to install this bopped retractable baby gate in front of our TV and bookcase ASAP. Photos attached of the space, the gate and the instructions.

Will need to supply and install cat rollers on top of fence around backyard.

Dog proof fence (visual block) match the current one closely

Side gate supple and install width of side of house is 1700mm. 1st photo is showing the house to the right is where gate is needed. Second photo is what kind of gate we are looking for.

Supply and install a new pool gate as the existing hinges have failed compliance and replacements are no longer available: Materials needed - 12mm Clear Toughened Glass Hinged Panel 1170h x 1600w Gate 1170h x 900w Polaris Soft Close Hinges Gate latch Removal of old gate and panel

Need to screw in the holder that enables locking for the colourbond gate

Need the flyscreen to be put back on the back door and also install the dog door

Looking for someone to supply and install a Colourbond side gate between the house and fence. • Gate approx 1m wide × 1.5m high • No existing posts, so posts will need to be supplied and installed • Tasker to supply gate (cream colour), posts, hinges, latch and concrete for footings • Ground is soil and easy to dig. Just has a few bricks in the middle of pathway • Easy side access to the area • Looking for a neat, secure install aligned with the fence Please include materials and labour in your offer. Photos of the space attached. Purpose is to keep the dog away from the back side of the yard. Budget: $600–$700

Require a gate at top of stairs, built from timber to match current balustrade. Will need to fit between current posts. Attached photos with an example gate and pics of opening for gate. Measurements: width-667mm Height-900mm

Hello, I need a gate/fence installed around the side of my house so my dog can’t escape. Looks like there was a gate previously but has been removed.

Gate welds have broken which has also caused gate to warp. Require gate to be straightened and all welds to be re welded, allowing gate to close smoothly