Find a professional gate installation in Everton Park

The metal pillar of my front gate is pulling out of the concrete brick of my fence. It possibly needs bigger dynabolts installed to secure it back onto the fence.

Construct a gate area 1.98m wide x 1.8m high. Add new posts as required (hardwood) Install steel gate frame to fit 1.8m height. Attach hardwood dressed timber vertical battens approx 40mm x 20 mm Add key latch to gate If needed, add sleeper (hardwood) - Due date: Flexible

Remove a fence gate and install it at a different place ( a bit front of the house) please see pictures of current and future - Due date: Flexible

The gate pillar was touched and pushed by a car when leaving the property. It wasn’t a strong hit but the concrete base cracked a bit and the pole/pillar is now a bit wobbly the gate it ltself got pushed and fell of the rails. One of the weels came off too. See pictures attached.

2 x Dream baby installation gates to external render wall to fence. Someone neat and tidy who knows what they are doing. - Due date: Needs to be done on Sunday, 30 October 2022

Replace rails n palings with 1200 palings - Due date: Flexible

Hi there, I have an area under my front deck that id like to use for storage. It currently has timber palings around the edge (first pic) I’d like a section of these palings to be turned into a gate to allow easy access. I’m think something similar to another gate that’s already there in a different part of the house (2nd pic). - Due date: Flexible

Using existing recycled timber fencing, we require a fence to be installed across our backyard, which is a standard suburban block. We would also like a gate put into it. With the potential of running more fnce down the side perimeter if amount of materials permit. - Due date: Needs to be done on Monday, 22 August 2022

Install baby gates at top and bottom of internal staircase.

I need around 36 sqm of corrugated roofing removed from a low set garage & carport. This will involve a ladder and a good cordless drill. - Due date: Before Friday, 18 March 2022

I have the steel, the hinges and the cold gal. Need a gate frame welded up. 3.1mx1.8m Have a drop saw and welder here, but prefer you to perhaps bring your own. As having wire feed problems with mine.

Need a CCA treated pine gate (1200mm high). Side fence to wall is approximately 1300mm wide.

Need someone to purchase a metal post and concrete into the ground then move the existing gate to the new post. The gate will also need a catching mechanism to secure it closed. This is to secure a large dog. Also have a fence panel where the wire needs to be stretched and secured to the frame. The gate is in an existing location thought it would be easier to supply new post then dig out existing post. Job is at Everton Park.

White picket fence. Want a gate about 1200mm wide as we're currently having a paver path built up to it. Preferably done this week so the pavers can be laid up to it.

Needing to have a small fence built and a Bunnings gate attached. It doesn't need to be pretty just dog proof.

Had a water leak in roof which did internal damage to plaster. (Leak fixed) Job is to remove damaged plaster and check behind for moisture behind. Prepare plaster for painters come next week. Looking for someone with sound building knowledge/plastering exp for an honest opinion assessment as we don’t want to paint only to have the same problem again. Damaged area 20x25cm Thanks Lachlan