Find local furniture repair handymen in Sydney

Sorry no access to photos currently. Double bed from ikea needs fixing. Headboard slats keep falling out and structure below mattress keeps breaking. Also need a cubed Ikea kallax shelving unit put up.

We need to flip the orientation of our ikea friehten sofa bed. It’s an L-shaped couch and we want to reverse the layout

My Ikea Kompliment wardrobe in my rental has completely come off the rails. Ive researched it and it appears that its been installed incorrectly- the mirror door should always go on the front. I need someone to fix that for me please

I need someone to help with the following: FIX to wall - 2 x IKEA wardrobes (already assembled) Just need to be fixed to wall, for safety Task: - Drill hole in wall - Fix wardrobe using bracket supplied by IKEA Location - ULTIMO NSW 2007 Parking and lift access Please quote Quick job, convenient for a local in the area

Task: Buy & cut wooden panels to replace IKEA slats + install anti-vibration pads I need help fixing my IKEA MALM queen bed frame with the LURÖY slat base. Current issue: The existing IKEA LURÖY slats move and fall out of place with any movement, causing instability and noise. Proposed solution: Replace the current slats with three custom-cut solid wooden panels and install anti-vibration pads underneath to eliminate movement and noise. Scope of work: • Purchase suitable plywood / timber panels (approx. 20 mm thick) • Cut into 3 panels, each approximately: • 152 cm (width) × ~67 cm (depth) × 20 mm (thickness) - let me know opinions here • Remove existing IKEA slats • Install the 3 panels across the bed frame (using the existing centre beam) • Add anti-vibration / rubber pads between the panels and the bed frame rails to stop noise and movement • Ensure panels sit securely and the bed is stable and quiet Notes: • Bed size: Queen • Bed frame: IKEA MALM • Panels should replace the slats entirely • No structural changes to the bed frame required See photos of existing base, current slats and proposed solution

Need to fix up a drawer unit I got from IKEA. I assembled it myself and as expected it’s given up on me and come undone. The mirror inside is also broken and needs to be replaced.

Need to fix up a drawer unit I got from IKEA. I assembled it myself and as expected it’s given up on me and come undone. The mirror inside is also broken and needs to be replaced.

The ikea bed broke overnight. Looking to someone to fix it ASAP today.

The Ikea LACK wall shelf is not secure anymore as I leaned on it. Lack Assemply instructions from ikea website. This building was built 15 years ago- wall stucture accordingly.

The piece of timber into which the front leg of an ikea couch has snapped... it needs to be replaced and possibly strengthened with additional timber support

I need two kitchen island panels (originally Ikea veddinge) replaced or repaired. Not sure the best approach, but look to fix with simple and economical solution. It's not a high end kitchen but a nice house. Price can be increased or decreased depending on the approach. Either replace the panels, do a double panel, or just put an edge along the bottom?

I have two IKEA chest of drawers that were working fine when I first got them. But over time, they are starting to get quite loose. The place where the drawers are joint together are coming loose. And for some of the drawers, they are coming off the wheel. Im not sure how to fix, would love so help getting it back together so its nice and sturdy.

Need someone to fix my attempt at assembling a set of IDÅSEN unit drawers from IKEA. I’m not sure where I went wrong, so I’ll need someone to assess what’s wrong, possibly dissemble and then reassemble. It’s a small set of drawers, so I can imagine it would be a relatively straightforward job for someone who knows what they’re doing. Link to item: https://www.ikea.com/au/en/p/idasen-drawer-unit-on-castors-dark-grey-10360983/

I need help to fix an IKEA MALM double bed. I have tools but it would be good if you could brings your too. Shouldnt take too much time to fox as it's a standard IKEA bed

Hey! Looking for someone to help fix one Malm under bed drawer—the screws have come loose, and the front has completely come off. It will need new screws, but I’m not too concerned about it being aesthetically perfect—just keen to get it fixed and functional again. Let me know if you can help! Thanks 😊

Kitchen installer did an incomplete job and the wall cabinet is not straight (apparently because the railing is sagging on the studs and installer said he is holding the right hand side cabinet with the left hand side one via the trapezoidal cut out) Please provide approx quote and confirm you have insurance, we can organise onsite inspection after

I need someone to figure out a solution for the broken slat on my ikea mandal bed. The pieces are supposed to fit together like a jigsaw puzzle but one of them won’t stay together- I’m not sure what the best solution would be. Maybe wood glue? I could figure it out myself but honesty I don’t want to deal with it. Hopefully this is an easy job for someone. The draw also gets stuck but I’m more concerned about the slat. Let me know if you can help.

Wardrobe was put together but the 2 vertical sections at the bottom put on back the front & base bit put on upside down. Would like removed & put back the right way around.

Hi everyone, I need two things for this task 1. Items to be collected from Tempe ikea and to be driven to glebe NSW 2. Ikea furniture to be built ( pictures are provided) - Due date: Needs to be done on Tuesday, 31 October, 2023

We have Ikea Besta storage units with soft close doors. A number are skew and no longer level. We need help getting them level. There are 8 doors all up on cupboards that are wall mounted. Don’t have pix right now but can send. Would like job done on Friday 1 September. Flexible with time. - Due date: Needs to be done on Friday, 1 September 2023

Outdoor furniture to be built. 2 x Armchairs 1x Lounge

Assemble outdoor flat pack sofa - pallet style

Need a 7 seater outdoor furniture & egg chair built.

Set up outdoor furniture - chairs, table and fit pit/area

Please assemble new outdoor furniture at my office. Pictures attached.

East assemble 3 piece outdoor furniture

Assemble 1x three seater outdoor sofa, 1x two seater outdoor sofa, 1x outdoor coffee table, 1x three piece bench setting, as discussed

Outdoor bistro furniture by alfordson

Assemble Gardeon 9pcs Outdoor Furniture Dining Set Lounge

Install blinds and curtains on 2 triple sliding doors, install lock on a cupboard, hang 1 or 2 artworks up, put outdoor furniture pack (BBQs Galore/not ikea) together, put entry console table together

Looking for help assembling a 4 piece corner outdoor sofa from Freedom. Attached pictures of instructions from 1/4 of the boxes that arrived. Assistance needed ASAP today, please let me know the earliest time you can be in Stanmore for with your offer.

Labour to assemble outdoor furniture - View all the details of this offer: https://www.airtasker.com/offers/01K89TSG5EZVQAKC12VESFNTDF

Build outdoor Furntiure: X2 single chairs X1 double chair X1 table

Need 8-10 outdoor tables built on site, ideally need built first thing in morning! Simple tabbls shouldn't take longer than 2 hours!

Need 8-10 outdoor tables built on site, ideally need built first thing in morning! Simple tabbls shouldn't take longer than 2 hours!

Assemble outdoor furniture - 2 items.

Table and 2 chairs and a seat need sanding then a stain

Hi, Im moving out of my apartment and need an Airtasker to takeaway some unwanted outdoor items that are still working (although haven’t been used in a while) I have the following item: - Weber Gas BBQ (originally purchased for $800 in 2019) (note: needs a good clean!!) - Gas Heater (with gas bottle) - Electric Heater - Jerry Cans (1 x 20L + 1 x 10L) with around ~13 litres of RON95 unleaded petrol in them These items could probably be sold for at least $250+ in total on Facebook marketplace so please factor this in to your pricing. Also, there is an old treadmill that needs to be collected as part of this. This treadmill is not functioning and will need to be disposed. Please see photos of these items attached to the task listing! Ideally, these need to be collected tomorrow (Saturday) at 11am. Parking can be arranged if needed upon arrival, and I will have someone to provide help ( 1 person) you carry the items down to your vehicle with you.

Need someone to build our new outdoor furniture, see the below photo.

Hi Oscar arturo! Rebecca wants to work with you again. Here are the details: Hi Oscar, just wondering if you would be able to move something for me again... from Newport to Middle Dural? Its an outdoor furniture setting. Looking at either 13 or 14 Feb. Please and thank you very much. Rebecca - View all the details of this offer: https://www.airtasker.com/offers/01JK2TA19DTDWR3V3MTX46326S

The sliding door is stuck. I accidentally pushed it in slightly at the bottom when moving the bed yesterday whilst it was open and within that time it went from very stiff to slide to not closing. The wardrobe has two doors and each slides open on the other - so we now can’t open the other door. Both doors still look levelled. Photos 1-3 show the mechanism at the top, 4 the wardrobe, 5 open. We are available from 5pm tonight. Many thanks.

Put door back on wardrobe

One of the wardrobe sliding door unable to slide and loose screw for the other wardrobe

I need the wardrobe railing fixed and a bracket installed in the roof in the centre (or hook) to hold the weight. Also need a bracket installed on the roof in the second wardrobe and the anchor points tightened (slightly coming off the wall - see pictures). Will pay for the brackets or hooks on top of quoted price - you just need to bring it.

Wardrobe door needs adjusting and fixing Hang a small white cupboard above toilet in bathroom to plaster wall

I am seeking an experienced and reliable person to complete a repair to a wardrobe Scope of Work: - Wardrobe rail repair including removal of a broken part lodged in the existing hole (photos included) - installation of the required brackets, and securing and realigning the wardrobe rail to ensure it is stable and functional. I’ve already purchased the brackets (photos included). I’ve also added a photo of what it should look like Requirements: - Ability to bring own tools - the apartment has already had an end of lease clean so I need the person to be very clean in the workspace

Fix sliding doors on Wardrobe

Wardrobe sliding door stuck

I have a 3 door wardrobe one of the slinging doors is not running smoothly

It’s not on the rail. It’s off and sitting on the carpet. It needs to be lifted back onto the rail. Is someone around who can help?

The wardrobe doors have come off their railings/wheels have broken. One still slides properly but the other doesn't move smoothly it's very hard to open.

Wardrobe door held by 4 hinges (135 degree) 2 have come off and needs to be replaced

The drawers in my built in wardrobe are broken. The tracks may need fixing too. I believe the issue is that we wardrobe frame has widened/slipped somehow causing them to slip out

Repair wardrobe bar and assemble bed, both pictured. Thank you!

1. Dismantle and dispose IKEA 4x4 Kallax shelf 2. Reattach 3x wardrobe drawers. Can you find drawer knobs similar to the first drawer? 3. Remove about 15x wall hooks and fix wall (no need to paint)

Fix the wardrobe door that has fallen.

Sliding wardrobe door has come off hinges entirely & plastic piece attaching has snapped (Picture attached!). Not sure how to fix it but hope someone is able to help :,)

Wardrobe rail hangers (x2) require repair/re-hang as plastic wall bracket has fallen off. Wardrobe door has slightly come of bottom rail as a result.

Builtin wardrobe bulk head has dropped. It needs to be re-fixed (screws and potentially construction adhesive) so it doesn't fall down.

To repair damp damage partition in the wardrobe as shown in the pics. Prefer if the whole panel doesn’t have to be replaced. Panel size in cm 205H, 45W, 1.5 thickness. There is also skirting board (26cm height) at the bottom

Experienced Cabinetmaker / Furniture Restorer Needed – Make Large Solid Wardrobe Fit Apartment I’ve inherited a large, heavy, solid pine wardrobe. It’s a single, non‑flat‑pack piece and, as it stands, it will not fit through a tight internal hallway corner. I need an experienced cabinetmaker, joiner or furniture restoration specialist to design and carry out a professional solution so this wardrobe can be brought into the apartment and used long‑term, without turning it into a “hack job.” This is a structural furniture problem, not a basic removalist task.It's pprox. 235 cm high, 120 cm wide 53 cm deep. Solid pine construction & very heavy. Continuous solid back panel (no factory joints or seams) Traditional doors and lower drawer section at the front Currently stored in the building carport with good access. The issue is the internal hallway turn, we couldn't get it into the bedroom and Please look at the piece, and propose a solution. In your offer, please clearly explain: Your overall approach How you would get this wardrobe into the apartment given the access constraint. What steps you’d take to keep it structurally sound and visually coherent afterwards. How you’ll deal with structure and movement How you’ll prevent racking, wobble or long‑term weakness once it’s in place and full of clothes. How you’ll handle doors, drawers and alignment How you’ll protect and, if necessary, remove doors and drawers. How you’ll make sure they still operate cleanly (even gaps, no binding) when the wardrobe is in its final position. How you’ll protect existing paint and mouldings while you work. Please send photos or links of your past work I want to ensure the wardrobe is safe, stable and fully usable in its final location. Budget: $500 (indicative). I understand this is a specialist, time‑intensive job - I will be choosing based on the quality of your approach and your track record, not just price. Thank you!

Bought these four chairs on marketplace for $500. They were very creaky. But seemed ok. Two guests have fallen through the chairs and the wooden frame has broken (2 still intact, 2 snapped). Want to find the most affordable way to restore them. If Not financially feasible I’ll just go look for something else, but I do love these chairs.

Antique chest of drawers needs repair. Constructed without nails, the wooden joints have expanded and 3 drawers need putting back together. Side of one drawer is missing.

I have a wooden bed frame that has sustained damage. The corner joint where the side rail connects to the footboard has come apart, causing the frame to lose stability and support. I need the frame to be repaired so that it is stable and can support the mattress and weight without collapsing. - Due date: Flexible

I have a pair of antique Victorian chairs with flaking finish on the wooden arms. Need someone to sand the arms down (the other wooden areas of the chair are fine) and then finish the wood off with a varnish that suits the rest of the wood finish. The chair is upholstered in pink velvet which we'd like to preserve if possible. We have sandpaper, varnish and paint brushes. - Due date: Flexible