Find a local floorboard profesional in Inner West Sydney

Needing a timber floorboard replaced.

Fix the floorboard in the attic

Need to remove and replace with good quality floor. Need to come in to check for dimensions and quote. I also have a broken folding door if you can fix that.

Rotten floorboards already removed. Concrete slab bottom. Need to install engineered timber floorboards, potentially floating, ideally glue. May need to trim the tongue and groove side of the existing floorboard. Size of installation is very small: Approx 750mm x 665mm May include installation of a laminate trim so it lines up to skirting board. Timber already purchased

Looking for someone to install floorboards in small 2br apartment. 40sqm total floor space. Only bedrooms and living room will have floorboards. Must be experienced. Boards will be ready in apartment and floor levelled. Must have good attention to detail and provision for expanders, including areas where the floorboards will meet up with tiles. Boards are Oak Saffron 1511x229x8mm

Hi, I need someone experienced to replace a small section (around 2 boards) of water-damaged floorboards and skirting (1 meter) near a doorway/wall, as shown in the photos. I will confirm shortly whether matching materials can be supplied. Please provide a quote for labour, and let me know whether you can also source suitable matching materials if needed. Located in Rhodes.

Hi, I'm removing carpets (DIY) from our 2x bedrooms, looking for someone or a company with floor sanders to come and help sand the floorboards underneath and apply polish / protection layer Bedrooms are 3.3 x 3.5m (~12sqm)each Not sure what budget should be for this so please submit your quotes Thanks!

Replacement of two floorboards on ground floor of Dulwich Hill home.

Carpenter or handyman needed to cut into original timber floorboards to allow access for engineer to view the subfloor.

Floor boards require sanding and sealing. There is quite a bit of variation in the floor currently, we do not expect a perfect outcome just a bit more consistency and brightness. We plan to re-do the flooring in 2 years so this is a semi-temporary fix. The area that requires sanding is 67sqm. There are two bedrooms, one living room and the corridor. I would like this job completed between the 11-15 June.

Will provide DIY floorboards from bunnings needing some to lay flooring in caravan

Need a look at fixing creeks in floarboard

We have existing Aquatuff hybrid floors installed; however, we need to fix the gaps around new cabinets in the kitchen area. This will be needed for the dishwasher area, and around the bottom of the new cabinets (see photos for details). Total area of gaps is <1sqm. Total area overall is <6sqm. We can supply the floor board planks.

Need to remove the small scratches on the floor board in the hall

We need timber floorboards removed from original timber floors. These floorboards have been pinned down and need to be removed with care to not damage original floorboards beneath. There are 3 rooms and a hallway.

Fix floorboard scratch’s - it is about 75cm long, it’s not very deep.

Two small bedrooms need carpet removed and existing floorboards filled in, sanded and varnished/ polished. Both rooms approximately 3mx3m. Colour to match rest of house as best as possible.

Taking up existing carpets prepping the underlying floorboards sanding coating polishing it’s a small home 3 x beds 1 x hallway 1 x living - lay floorboards on a cement floor 4 x 2

Long but not deep scratch in floorboards.

To install the floor boards for a room of size 2.7m x 3.3m?