Find a local floor sanding profesional in Brisbane

My wife and I are sanding the deck around our pool back to raw timber, so we can apply decking oil. We’ve done plenty of this before, and we have all the equipment required. An appropriate belt sander and geared 150mm orbital sander will be provided, with plenty of spare belts and discs. Dust collection is set up. We’ve already started the job. We just want some extra labour for 3 hours on Saturday. Ideal would be 9-12 on Saturday morning. You need to know how to use belt and orbital sanders, but you don’t need to bring a thing. You just show up, and for 3 hours, it’s your turn on the tools.

Experienced floor sander to sand and seal hardwood floors in 3 bedrooms 2 lounges and kitchen of home following renovation

Help us sand 3 bedrooms in our qld house ! We have hired sanding gear but maybe it’s a bigger job than initially thought.

Need exterior timber screening sanded back ready for restraining. Approximately 12-15 meters of horizontal timber slats behind a pool. Please bring your own orbital sander with dust extraction if possible.

Kitchen, living room, hall and study sand floors and re coat

3 bed house (2 with carpets to be removed) kitchen lounge dinning 2 small sleep outs. Floors are in good order but not sure about under the carpet ( looks fine from underneath the house) Nil outdoor sanding and minimal furniture in the house

Hi good condition stairs and timber floors Looking for light sand and polish 2 story house Price per sqm $30 including materials

Need my timber floor sanded, nails punched, nail holes filled. Must use a floor sander, someone else did it today but couldn’t finish it. Roughly 10m2 too be complete. Bust me done 2pm tomorrow or Friday morning

Floor sanding where our old kitchen was removed.

Sand timber floors to prep for oil/water base finish. Floor size is roughly 3.6m x 7m.

I need to get the floor sanded in the 4 booth area of a restaurant . size is 2.5 sq mtr by 1.3 sq mtr roughly each booth . Has to done after the restaurant close at 11pm but before 6am . tables will be moved . its a 7 day operation so needs to be a quick dry time to set the table back for lunch time service .

Old deck needs to be sanded back for resealing (do not need you to do the sealing). Deck is 35 square metres.

126 Sq Mtrs of rough sanding then fine sanding on timber decks and 5 step treads 4 Sq Mtrs of fine sanding and clean up over 26 step treads 13 Sq Mtrs (approx) of hole punching. 100mm wide timber boards with nails at 450mm centers

We have a hardwood deck approx 40 sq m with 3 stairs built in. Need deck and stairs sanded and 3 coats of sikkens deck oil applied - Please do not respond if you plan on doing less than 3 coats, as we will review work between each coat. It is rectangular with walls/ glass fencing around so will need a detail sander as well as deck sander.

I need a section where a previous wall occupied sanded and matched with the remaining floor. I also need a crack repair that is occuring during to movement over time. Ready to hire, need job done before putting unit on the market

sanding and repainting front deck and gates underneath

Sanding down an old 9-pin-bowling lane within a timber floor. Sanding down about 1cm of hard wood. Approx. 25m long and on average 40cm wide.

We need our desk sanded and polished. It’s approx 25 sqm

We have hardwood floors that we need sanded back (two bedrooms, small/medium kitchen and lounge area). We are getting some ideas of cost. There is also a set of hardwood stairs. Areas needing sanding from floorpan below: Stairs, Living/Dining, Bedrooms, corridor to bedrooms, inside built in wardrobes in rooms. *Note I have put in a random number in budget, more interested in getting quotes *

Requesting outdoor deck sanding in preparation for oil/staining. Area is approx 22 metres squared. No oiling or staining required, only sanding. Seeking someone with their own floor sander. Deck is flat and timber in good condition. Nails will already be hammered/punched flat and furniture removed.