Find wood fencing professionals in South East Melbourne

Hi! I need Someone to fix a broken wooden fence panel. Please find photo attached Thanks!

Straighten up leaning fence. Some pailing fence not nailed to timber posts anymore. Need the fence to be straight and rectified. Some timber posts are wobbly. Install additional posts next to old posts or install metal tubes behind fence and bolt old timber posts to it.

Old fence needs to be replaced around 15 Mts

An established fence has come apart in one place I need to have refixed back to the main post

Looking for a fix on this fence, it needs replacing but just need to get it in a half decent shape before getting it replaced at a later date. A handful of pailings need to be replaced, but mostly just getting it standing up and half straight. Not looking for perfection, just a temporary fix to make it solid. Two sections. First is roughly 10m long. Another smaller section 3m long at the back.

1.8m-2m Height, 30m Length，colorbond fence

Fence tilted to the side. 3 posts need replacement or additional support to keep the fence straight.

Remove old fence, install new wooden fence 2.6 x 1.8 metres (L x H), including disposal of debris. New fence will be about 50 cm from location of old fence.

Removal of a section of collapsed wooden paling fence inc a few redgum stumps. Currently on nature strip.

• Gate width: 98 cm, to be hinged on the existing fence. • 65 cm of fixed fence on the side. • Material: Wood, painted white. • Professional installation required. Please provide a quote for both supply and installation.

1. New aluminium fencing with a motorised gate (for the driveway section) needed with full installation - approx. 17 metres 2. Extension to a separate wooden fence also needed - approx. 10 metres

Require Posts 2 metres from ground level into ground for wall cladding. length is 13 metres so approx 1.5 metres apart across 13 metres

Need to fix one wooden post and attach the fence

Garden wooden fence of approx 19.1m long and 1.8m with cap had given way at 3 sections of the fence. 1. need to demolish the fance 2. remove the old fence 3. install a new fence per the phots of 19.1m (approx) 1.8m High with cap using all new posts for fencing works are hardwood posts (not cypress pine posts) of 125mm x75mm, and 75mm x 50mm (recess fitted – three rail set up) and 4. remove the old fence and rubbish associated with the fence Photo Notes 1- first photo shows 3 segments with single post collopsed. The part behind the shed is the post shared by 3 houses is still standing. Nothice that after the 3 collapsed segment, remaining fence that is still standing 2- second photo show that after the 3 collapsed segment, the reamining segments have not fallen. While the corner post is still intact, it might need a bit of clean up to attach new fence to it.

5 wooden posts on front veranda are rotting and need to be fixed or replaced. Posts are 90mm all round & 2.250 meters high. Metal rods attached to the concrete base . One solution might be to cut each post near the bottom and replace only that section. This will also require cutting off the current stirrups and replacing them with a different type, bolted to the concrete. I believe this is a cut/join method

Fix the fence. The wooden fence has several broken panels and loose posts. Please see attached photos for details.

34 meters either wooden or colorbond middle fence

Fences have rotted at the base and need to be replaced

- install pool barrier and gate total 6m, materials supplied , location : Ashwood VIC , more other odd jobs for fencing and gates, pool compliance job , any add ons can discuss further

I need a new fence built between me and my neighbour in wood budget is 1000