Find professional sliding gate repairs in QLD

Drive way has 5.6m opening, needs a 5.9m moterised pvc slidding gate. For slidding gate, needs a 6m concrete slab for installing track, needs a small slab for motor, needs a post to connect with power, power is in correct place. Right hand side is 3m long brick wall(existing,no need to do anything) 5.2m needs 1.8m high full privacy PVC fence, 1m gate in the middle.

Excavator nudged driveway sliding gate, which bent in a few aluminum batten panels and popped a few rivets of where battens go into gate. Also bent the electric gate guiding post, which requires dyno bolting (x 4 bolts) back on concrete

Sliding gate does not open this morning. Motor have sound.

Needing a sliding gate (sheet metal) with motor installed. 2 stage gate (2 x3m sections) All electrical cable has been run to the gate. Job is at Wurtulla. Some inspiration is attached

We have a Nice Hi speed gate motor that seems to have stopped working

Electric gate stablisers have broken off (see picture black block beside motor). The gate is wobbling. The gate may need to be removed and cleaned as there is a lot of debris on the track from mowing etc.

Need aluminum sliding gate installation Price includes material and labour Area about 4 meters Thx - Due date: Flexible

Need about 30 meters of colour bond fence with 1.8 meters height and 6 meters sliding colour bond galvanised gate including motors and remote - Due date: Flexible

Seeking an electrician or skilled person with automatic gate openers, It is for a sliding gate, there is an existing opener (Boss) and power, track etc but it has died from age. Have a replacement motor (Vevor) and just need someone to install it as soon as possible. - Due date: Before Friday, 2 February 2024

112 Slats to be welded to x2 spots. photo attached. - Due date: Flexible

Erecting gates and installing them - Due date: Flexible

I have 2 sliding gates that need to be re: programmed due to a mother board failing. I have installed the replacement mother board however i cannot work out how to program! New mother board works it is just the programming of the opening & closing along with 3 remotes connected to it. Please only work with me if you have - brand King Gates experience or you have a complete understanding as I have learnt kings gate sliders motors are a little specialized. I have added pictures with the sliding gates, the replacement mother board installed & remotes - Due date: Before Tuesday, 16 January 2024

Help check on the solar power connection for a sliding gate - Due date: Flexible

I have a 3.8m sliding gate with track to be installed. This job has two parts as the driveway concrete will need to be extended about 1.5m to the location of the sliding gate and along the fenceline for the length of the track for its installation (estimate 5sqm of concreting). Additionally there is a pedestrian gate but it will likely need to be on its own post to not interfere with the sliding of the main gate. Thanks - Due date: Flexible but prefer earliest as possible

We have lost remote control signal function to our garage door and sliding gate. This failure occurred on our return from holiday and after the recent electrical storms in Brisbane. The automatic sliding gate had been getting stuck and had trouble sliding, prior to the signal failure. So will need servicing as well. - Due date: Flexible

We can remove the sliding gate . You to level and regrout the running track , approxamently 12 to 14m's . If you want to refit the gate , not a problem. This needs to be started very early in the morning , completed in one day . - Due date: Flexible

The gate has been supplied recently with the Tail on the wrong side. It needs to be cut/grinded off and welded onto the opposite side. The gate is powder coated so will need to sand back a little to allow the welding. Once welded, it is to be sprayed to cover the weld and protect from rust. This is a process we have done before, and happy to explain over the phone in more detail if required.

Need to have fence on stone wall and two sliding gates for two driveway - Due date: Needs to be done on Thursday, 21 December 2023

The gate has been supplied recently with the Tail on the wrong side. It needs to be cut/grinded off and welded onto the opposite side. The gate is powder coated so will need to sand back a little to allow the welding. Once welded, it is to be sprayed to cover the weld and protect from rust. This is a process we have done before, and happy to explain over the phone in more detail if required. - Due date: Before Thursday, 21 December 2023

Need regular service of electric gate closer (installed by QPower). - Due date: Before Monday, 11 December 2023