Find a local glass fencing contractor in Brisbane

I am having works done on the columns next to the pool. To allow for the works to be done pool fence glass panels need to be taken out. When the columns get fixed the panels need to be put back in. - Due date: Before Friday, 20 January 2023

Glass Pool gate not closing, posts may need adjusting - Due date: Flexible

Hi, Just need a fence post replaced / new post installed. Fence is a glass panel pool fence (see pics). The existing post is no longer plum/straight, so is leaning. The lean means the gate doesn’t close properly. The rest of the fence is fine. So just need this post replaced. Thanks - Due date: Flexible

We have a high above ground container pool that we want glass fencing around. We weren’t going to initially do it so we filled up the pool but we have chosen to now so it feels safer with the height. We want someone that would be able to install it for us. Obviously with the height it’ll have to be done within the pool but the whole pool is walkable ie: not deep. We just want glass panels that are approx 500 height all around the edges of the pool. We will supply all equipment. - Due date: Flexible

Need 2 glass pool fence panels installed that were removed for construction - Due date: Before Friday, 15 July 2022

Collect pool glass panels and take to the dump - Due date: Before Sunday, 20 March 2022

Hi, I need two glass pool fence spigots drilled into concrete fence, amd I need 4 x M10x1.5 screws to go into spigots to secure glass

Need 6 m of glass in stalled and provided total length is 6 m.need gate installed in that 6m.on to concrete

8.5m level, straight frameless glass pool fence to go between wooden fence and rendered house wall. Must be built to BCC regulations and include an approved gate. Supply all materials and remove existing glass/black pipe pool fence. Spigots need concrete pads under fake turf, and a few go into a paved area.

Require someone to fix pool gate which is not self closing and lock bolt not aligning with wall housing. Looks like gate has dropped down a bit. - See attached photos.

I require glass pool fencing to be installed - length 2700 to include fixed panel and 1 x gate. 1 x pool gate at the other end. Will purchase required items from Bunnings.

re-concrete the posts of a 3 meter section of fence. Ground movement has caused the fence to tilt upwards by about 8 cm. The gate latch needs correcting after the fence is realigned.

One of the pool fence glass panels has shattered and we have a replacement panel but need help reinstalling a panel we have already

Move four glass pool fence panels (one is very heavy) down from their storage location on a backyard deck (small set of steps) a few metres to the pool area and reinstall them on the spigots. Includes one fence panel that will need reattaching to hinges using Hex bolts. I can help with lifting and holding the panels.

4 x 1850 pool glass panels are on site. Mini posts already installed- just need muscle listing 40kg glass panels around the house and to instal in situ onto the posts. Maybe an hours work.

Needing to remove 5 panels of a frameless pool fence from spigots.

Relocation of approximately 30 lineal meters of frameless glass pool fencing. Circa 20 fixed panels plus 3 gates Typical fixed panel 1.2m x 1.2m (including spigots) Spigots to be retained or discarded depending on condition Uninstall, load to transport and unload at point of storage - van or ute required Urgent work - must be complete by end of this weekend (8th of December)

Hey Need a price and fixing of glass pool fencing, approximatley 10m overall. Much appreaciated

I'm installing a small DIY glass fence using stuff from Bunnings. I need some help installing cement footings. Flexible on date but need it in next week or two.

I need someone to replace 2 stainless steel hinges on a glass pool fence gate. Must have experience with glass pool fences. hinges supplied, as per photo. Any Q's please let me know. Thanks