Find a fence repair professional in South Brisbane

Hello, I need a Colorbond fence repair along one side of my neighbour’s and my property. Unfortunately, the fence was originally installed by a poor-quality contractor who only used 1–2 tek screws from the fence post to the steel bracket at the bottom . With the strong winds yesterday, the wind load caused the tek screws to turn, allowing the fence to lean over. The fence on the opposite side of my property is undamaged, as it was built properly using a minimum of two heavy duty tensile-rated bolts with locking nuts on every post, along with additional tek screws. To fix this, I need the Colorbond sheets removed, the posts relined back straight, and new tensile-rated bolts and locking nuts installed in the designated bracket holes, additional tek screws installed, then colorbond sheets reinstalled. There are 20 Colorbond fence panels along this side of the house and 1 panel on the other side, and all will need to be repaired to ensure proper integrity along the length of the fence to withstand future storms. I’ve attached photos showing the issue and the repair work required. The Colorbond sheeting itself is undamaged. The colorbond panels are 1.5m high with 0.3m of breezeway slats. The post are 1.8m. Ideally, I am looking to have the work completed before the 4th of December. Located in Cannon Hill. Welcome to view, i have straightened the fence back up temporarily until it can be fixed. Thanks

Colorbond fence has become loose and has broken at one section. The fence is unstable at that section and shakes during windy days

Just need someone to repair the fences at the back. It is starting to fallen apart.

Need a quote on what it costs to fix as unsure what replacement panelling is needed.

PVC fence attached to concrete pillar outside of property. The fence needs to be detached and attached to another structure so that the pillar can be bulldozed.

Fence needs posts replaced with steel as they have rotted out. Fence itself in great condition. 17 posts in total, approximately 40m long total. Palings are 1.8m. Hoping to just replace posts but depending on cost open to full fence replacement

Fence repair. Rotten wood needs to be replaced and fence put back up

One pool fence needs to be reinstalled. Glass is in good order.

Fence need repairs and needs quotation before start of the job so can send it to Neighbour

Fence repair or new built around 20 to 30 feet.

Our Fence got fire damaged, 1.8m high palings, 3 posts and rails. its 3.5metres wide. Price to include taking away damaged fence away

Our fence was previously supported by a slanting palm tree. We removed all the palm trees and now some sections of the fence is wobbly. Need extra support and some related repair to make the opening and closing of the gate easier. Can view on appt if required. We are in Calamvale.

A couple of fence needs fixing, three minimum, require a new fence post for those location. perhaps go around and check what is required to fix first before proceeding

Repair part of fence and need to add brackets and extra sleeper on retaining wall for whole fence

The bolt nuts on the based was flipped.

Few the broken timber fence requires fixing using the same fence or may be new ones

I need approx 100 timber post cut on an angle from top, treated to stop rot, painted. Approx 10 posts need replacing.

My fence is leaning towards our property, I would like to get a quote from the expert to understand the cost of fixing it or is it better off replace the whole thing (approx 20m). The budget is for quote only.

A section of our fence has collapsed due to bad weather. We will need to replace rails, pails, posts and footings for around 3 panels (around 8L/m) section of the fence and ensure it is appropriately re-enforced. New items required: 1 x 50x50 steel post, 5 x colorbond channel post (including 2 x new concrete footings poured above ground level to prevent water pooling). Include cost of demolition and removal of panels from the premises if they cannot be re-used. Quote on labor cost estimates, cost of material will be handle as separate invoice. Prefer experienced fence contractors with own tools & equipment.

Install missing fence panels and straighten up back fence with supporting post