Find experienced local fencing contractors in Banora Point

Slight incline, fairly small area, straight forward job. One side will be colourbond. There is an existing small courbond fence that needs to be removed and panels reused where possible. The front and other side will be horizontal hardwood slats. Also need double colourbond gates on carport.

PVC fence quote . Roughly 25m

Part of boundary fence was blown down after Cyclone Alfred. Will need a couple of new posts to replace rotted ones. Straighten about ten metres of fence that is leaning over.

Glass pool fencing on pool required. Will supply fencing 14 metres of fencing around 5 X 3 pool. Around November.

Panel on pool fence is coming out of track on the aluminium post. 1 or both rubbers need to be replace and glass refitted

I need someone to complete the attached style of fence in the gap over the water tank area. See pictures. This consists of installing 2 posts (likely need to be dyna bolted down into the concrete) and a third post against the existing wooden fence. Then running the wire through to complete it.

Need pvc fence quoted for supply and install - Due date: Needs to be done on Saturday, 7 October 2023

I have a non-compliant pool fence and wish to have that made compliant. The boundary fence is within the non-climbable zone of the pool fence. Additionally, part of the boundary fence (about 50m) needs replacing, along with gates. Please only reply if you are up to speed on NSW compliancy requirements. There are probably a few options in order to make the pool compliant. I'm interested in getting proper quotes after an in-person inspection. Thanks - Due date: Flexible

Need a quote on getting a fence put in and how it would be done. - Due date: Flexible

Need to install timber fence for pool compliance. 10mx1.8m. ideally to match existing 150mm pailings. new fence will need to install on inside of existing fence and extend by approximately 1m. - Due date: Needs to be done on Monday, October 31, 2022

The fence is a new, but in the wind two sections have become loose. It is damaged in two parts, Part 1. a post has broken (rusted through) at the bottom and will need replacing Part 2. The post is loose and has been supported by a wooden pallet. The pallet needs to be removed and the fence made standalone. the fence is complete, but will require concrete a new post and some screws. Two signs need to be fixed to the fence (4 screws and a drill) - Due date: Flexible