Find a local console repairer in Circular Quay

We have 12 dining tables that we need to be assembled (tops secured to the base) we have no fixings or brackets this will all need to be provided. the post is 80mm diameter, need this done today. Photos attached

[Repost] Location: Sydney cbd near darling harbour 2000 Looking for someone experienced with plumbing to check all the taps around the house and make sure they are working properly. One shower tap is currently dripping and needs to be inspected and repaired. see pic 4 Would like you to: • Check all taps (only 3 of them) • Repair the dripping tap at shower room • Make sure everything is working properly afterward Please bring the necessary tools and replacement parts. Thanks!

L shaped kitchen bench top. L shaped laundry bench top. 1 x straight double vanity top. Breakfast bar top all 35mm Bamboo. Requires some full length straight cuts. Materials on hand, apartment, excellent access and off street parking.

Looking for a handyman to complete a small patch-and-paint touch-up job in our office. Scope of work: * Patch minor holes and marks from 3 TV wall mounts * Patch minor holes and marks from a board/signage area * Touch up paint the repaired areas to match the existing wall colour This is a relatively small office maintenance job. Please bring the necessary tools and materials and provide a fixed-price quote. Location: Sydney CBD Parking: Available on-site Looking for someone who can complete the work neatly and professionally.

Need two mirrors hung. One has a specific mounting kit. The other will require three / four gyprock anchors (provided). Need three lamps wall mounted. One requires two screws and gyprock anchors (provided). One requires 1 hook and gyprock anchor (provided). One has a specific mounting kit.

Located in the cbd have a few things to open and build, can pay per hour will rehire if reliable (for airbnb)

Hi everyone, I need someone to go to Bunnings tomorrow and purchase around a dozen key rings that are 30 mm wide. We then need someone to go to a customer's home in Wooloware and fit these off for the customer. Must be done tomorrow (Monday) I've attached a few photos. Essentially one of the Lobster clips has lost its spring and is no longer attaching. Therefore instead of replacing these individually we're just going to put key rings on each of the rings to reinforce the support for good measure. We are going to install these on the rest of the clips on this so far, as opposed to just the one I've attached few photos. Someone with handyman experience and is great with customers is required

Hi, we need someone to help paint several furniture cabinets and tabletops. We purchased some furniture, but there is a colour difference between the pieces. We would like them to be painted / refinished into the same colour so they look consistent and more presentable. The job includes: Checking the current furniture surface and material; Advising what type of paint / coating is suitable; Light sanding or surface preparation if needed; Painting cabinets and tabletops into a consistent colour; Making sure the finish looks neat, smooth and durable; Protecting the surrounding office area during the work. We can purchase the paint/materials if you advise what is needed, or you can supply them and include the material cost in your quote. Please let us know: Your availability; Labour cost estimate; Whether materials are included or separate; Whether you have experience with furniture painting / refinishing; Any similar work photos if available.

1. Build a palisade for the dog sport Mondoring. 2. Build a hurdle for the dog sport Mondoring. 3. Build the long jump for the dog sport mondioring. Mondioring Jump Measurements (FCI Standards): Hurdle (High Jump): Width: 1.5 meters wide. Height: Adjustable, ranging from 1.0m to 1.2m depending on the level (MR I, II, III). Structure: A movable panel, 60 cm high, topped with a turnstile or 3 bars. Level Requirements: 1.0m (Brevet/Level 1), 1.0m-1.1m (Level 2), 1.0m-1.2m (Level 3). Long Jump: Length: Adjustable from 3 meters to 4 meters. Width: 1.95m-2m. Structure: A frame of planks, starting at 10cm high in the front, Alloy sides or bands every 30cm. Palisade (Wall): Height: 1.7 meters to 2.3 meters, with a sloped descent on the back. Width: 1.5 meters to 1.9 meters. Structure: A vertical wall with wooden boards 10cm high and 27-30mm thick, with a slant for easy descent, supported by beams These 3 jumps we would like welded to the specific measurements according to the rule book.

Poison 2 stumps and make sure they won't grow new branch. One is pine tree, around 1 meter diameter. One is black locust, around 50cm diameter. I don't have tools, you need to bring your tools or poison.

Have lamps that broken steel arms and one plastic globe holder

Hi, I’m looking for a licensed plumber to replace 4 taps total: 3 × basin taps (bathrooms) 1 × kitchen mixer tap All taps have hot and cold-water connections, and I already have the new taps ready to install. Details: Apartment is under 7 years old (modern plumbing). Straightforward replacements — no leaks or damage. Easy access under basins and kitchen sink. Please bring your own tools and plumbing tape. Photo 1: shows the new tap for bathroom Photo 2: shows the new tap and old one side by side, as a reference. Mirrors will be removed later.

Hi! We’re after a trustworthy handyman to help with installing desk dividers in our newly fitted office. The job needs clean, precise work. Tasks include: securely fixing supplied clamps in several spots; installing divider boards between workstations; making sure everything is level, flush and stable. All screws and clamps will be provided.

Replace the old shower head and tap with new shower head and shower tap. New head and taps providers. Located at Rousehill, need it fixed today

Need a painter to do a few touch ups around the office - minor things like scratches, and then a few skirting boards Location King Street Sydney CBD

Installation of heat lamps. This is for just one.

Furniture Repair – Chips and Dents (Chest of Drawers, Bedside Tables, Veneer Tables) Details: I need help with some furniture repairs: 1. Repair small chips on two bedside tables. 2. Fix three dents on a chest of drawers. 3. Repair chips on a veneer dining table. 4. Repair chips on another veneer table. Requirements: • Must have experience with furniture repair (wood/veneer). • Must bring own tools and materials for repair. • Looking for a neat finish as these pieces are for clients. Location: Sydney CBD showroom Timing: Flexible, but preferably within the next few days.

Compact essay to dryer keeps switching off every 5 mins. Need repair Located in bond st Sydney

Carpet joints stitches were opened and some tack strips were taken off to fix the flooring. Now this needs to be put back in original position

I'm professional installer of kitchens and various furniture. I offer repair of stone bench tops, chips, cracks. Starting price from 150$.