Find a local electronics repairer in Brisbane City CBD

I need someone to jumpstart my motorbike which is parked in the cbd.

I bought a gb500+ with dead cells and remade the packs entirely. Its the version with 2x 12v packs and 1x 4v pack. I plugged pack B into the pack B plug and A into A but the side opposite to the cable connectors popped and sparked when I tested the unit in 24V mode (switched on fine in 12v mode). From viewing some videos on youtube it is possible that pack B actually plugs into the pack A plug on the board, so I swapped them around and it booted up fine in both modes but read as having a flat battery. I unplugged the board that is soldered to the 4v pack and then the jump starter worked as normal, allowing to override on both 12 and 24v and showed it as correctly fully charged. This makes me suspect a fault in that board. Unfortunately I mucked around with it and plugged the pack A into pack A plug and B into B again and the main board smoked. I quickly put them in the opposite plugs and rebooted it and now it always has some of the face lights on all the time, but still works if I unplug the board soldered to the 4v pack. Only the bottom 12v pack plug actually powers the unit however, if I just have a pack in the top plug it wont boot up/turn on. I hope this information is enough to estimate how difficult it would be to diagnose/fix.

Luxman L85V Amplifier. RH channel has intermittent fault. I'll bring it to you

Cut solid surface bench-tops for a unit complex. Need carpentry / cabinetry skills to snug fit tops on cabinets. No mitre cuts or waterfalls. Most lengths are already cut but need sides done to fit on slight angle where required. Sand face edges to take out sharpness of cut and apply slight radius / chamfer. Will provide labour to help handle pieces. Track saw and sander available onsite. Need immediate start. Call for more details.

Needing 2 dints and scraps fixed and tub resprayed, looking for good offers 🙂

I have a smart tv but can’t add some streaming apps to it. Need help

I have a lampshade with a metal soldered frame that is shaped for a hanging light. I want to change the circle size in the middle of the lamp so it is larger and can be sit on my lamp stand. This would need to be welded to work.

Replace and Install new in the existing setup. 2xtoilets 2x shower heads 1x hand held shower 3x mixer taps Location: 4034

Relocate 3 x stainless steel bench and 1 x wall mount bracket

Quote request for Weds 24th Sept… The bathroom basin taps in my unit at the Adina (CBD) are becoming difficult to turn off, so I am hoping I might be able to get someone in to replace the faucets. I can be at the unit between 11am and 1pm if you need to view in person. I'm happy to source new taps if you can offer any recommendations (still want the cross-handles to match in as best we can to the shower/bath)... or if you happen to have a similar style from previous jobs that you'd like to "re-purpose" feel free to show me what you have! Louise =)

I am wanting someone handy who can design and build an aluminium collapsible bar table that hangs over balcony balustrade. Similar to photo but with powder coated aluminium. Looking for quotes and job completed.

I need someone who can jumpstart my motorcycle CB125F

Window frames need to be sanded and repainted, paint taken off window frames, some area of baseboards sanded and repainted, dark paint has bled over cornices in kitchen and living room (not a clean cut), some areas in front of outside door area and patio need to be sanded and repainted....I can send photos so you have an idea of what to quote👍

Bose QC25 headphones - the right side headphone has stopped working for either sound or noise cancelling.

The water keeps trickling and I have a feeling it is the outlet valve. I have already replaced the inlet valve recently, but the problem is still ongoing. Looking to have someone supply and replace the outlet value in the cistern. Also wanting the shower taps reseated Located in Adina Apartments - there is contractor parking if you see reception first, or 10 minute parking out the front. I have parked there longer than 10 mins numerous times without issues.

Put my stand up pedestal fan together (i have no tools)

Need an electrician to replace one ceiling lamp with a new lamp, and another ceiling lamp with a ceiling fan. Both are already purchased. The fan has LED lights and is remote controlled: - Ventair Spyda 4 Blade Ceiling Fan with Dimmable CCT LED Light - Satin White 50" - Spyda Remote Control - For 50" or 56" Models

Repair Kenwood amplifier as no power to on.

I have an issue with my Mavic 3 Pro. One of the arms came loose after the propeller lightly hit an obstacle. The arm is not broken, but it feels unstable. Need someone who can repair fast this one.

The charge entry on my JBL headphones is not working, so I can’t charge my headphones but they sound and work perfect. I’m located in Fortitude Valley 4006