Find trusted local electricians in West Brisbane

Would like to get 2 x outdoor ceiling fans with light installed in our one story home. There are 2 light switches already linked

I’m looking for someone experienced in plastering and ceiling repairs to fix a hole in my ceiling where a light fitting is installed. The plaster around the light was broken to investigate a leake, leaving a fairly large hole. I need someone to: * Repair the damaged ceiling plaster and patch the hole neatly around the light fitting. * Ensure the repair is secure and the ceiling has a smooth finish. * Sand, prepare and paint the repaired area to match the existing ceiling as closely as possible. * Ensure the light fitting is properly accommodated and the final result looks neat. Please bring your own tools and materials and include all costs in your offer. I’ve attached a photo of the damage. Please let me know if you have experience with similar ceiling repairs.

**Title: Licensed Electrician Needed – Fix Electrical Connections & Safety Check** Looking for a qualified, licensed electrician to inspect and repair electrical connections around my house. **What needs to be done:** - Inspect existing electrical connectors, power points and switches for loose or unsafe connections. - Repair or replace any faulty connections. - Check for potential electrical hazards. - Test safety switches (RCDs) and perform a general electrical safety inspection. - Advise on any additional repairs or safety concerns. I'd like someone experienced and thorough who can ensure everything inspected is safe and working correctly. Please provide your electrical licence details, availability and an estimated cost. Any additional repairs can be discussed before proceeding.

I have a light fixture I would like installed on the ceiling and then three lights I would like to move from ceiling to wall scones with a basic 90 degree batten lamp holder needed for each

Install a 32amp wall box for. 7.2 kw single phase charger Move nbn hfc cable inside the garage

Air Conditioning Installation – 2 Multi-Split Systems (6 Indoor Units) Looking for quotes from qualified and licensed air conditioning installers to install two multi-split systems in a two-storey house. * 10.4kW system with 4 indoor units – For the four bedrooms upstairs. * 6.1kW system with 2 indoor units – For the living room and study downstairs. Both air conditioning systems will be supplied by us. The installer must supply all materials required for installation, including copper piping, insulation, drainage, electrical wiring, brackets, fittings and other necessary components. The quote must include all labour, installation materials, electrical connections, testing and commissioning. Floor plan and system specifications are attached for reference. Please provide your quote, availability and relevant licence details.

Task: Install New Ceiling Light Hi, I need an electrician to install a new ceiling light, replacing the old light fitting shown in the photos. The old light has already been removed, and we have purchased the new light, ready for installation.

Electrician required to disable two powerpoints and add a plug to oven cable.

Relocate one power point, and add two more power points. Add two wall spot lights One light switch on the other wall. My budget represents around half a day worth of work. Let me know if you have any questions

Need a licensed electrician to remove two existing ceiling lights and install two owner-supplied fixtures: * Fixture 1: Artika LED ceiling fan/light (Costco) — wireless remote control, no wall wiring needed. * Fixture 2: IKEA NORAFORS LED pendant light — dimmable, remote-controlled. Details & Requirements: * Direct swap at existing standard 240V ceiling points (~2.4–2.7m height). * Must hold a valid QLD electrical licence and

We have a sensor light in bathroom at gym, currently not working, needs to be replaced

All new lighting fixtures provided - they're already on site. Pricing reflects a day rate which all should be able to get done in a day (if not, happy to discuss extra) Lighting fixture replacements - note mildly sloped ceiling: 1x replacing fluorescent with pendant light 2x replacing fluorescent with track spot lights 4x replacing ceiling light with new ceiling light 6x light switches replacement New lighting fixture install: 2x bedside wall mounted lights 2x bedside powerpoints

Looking for a licensed/certified electrician to install a Tesla Wall Connector at my home in Brookfield, QLD 4069. Details: • Install location is downstairs (garage/carport area) • Property already has 3-phase power • Please state in your offer whether you can supply the Tesla Wall Connector, or whether I should purchase it from Tesla beforehand • Must be a licensed electrician (please include licence number) and provide a certificate of electrical safety on completion Timing: Ideally done before 31 July — so in the next few days. If that’s not possible, next week is also fine. Please mention your earliest availability in your offer. Happy to send photos of the switchboard and the install location to help you quote accurately. Distance from switchboard to install location is 4-7 meters

- Swap electric cook tops (unplug old, plug in new) - unplug an old oven/cook top - change bulbs in garage lights

Install cooktop 60cm and oven 60cm and rangehood. All going into existing cut outs with previous electrical input (appliances removed less than month ago) . Cooktop will need own isolation switch.

Licensed Electrician Needed – Riverhills QLD We have a vacant 2‑storey townhouse in Riverhills and require a licensed electrician to: - Remove 14 existing direct‑wired fittings - Supply and install 14 plug bases into the existing 90mm ceiling holes Timing: Work must be completed before Monday 4th May. Only reliable, careful trades please. If you’re available and able to assist, please reach out. Thanks, Rachel & Tim

Just need new GPO installed, existing one not working due to age. Have the new one here so literally just the labour.

seeking an electrician to fix a new plug point on a electricity cable. previous LED fixture not working and needs to be replaced with a new one. One the cable is fixed deep in the roof, a new socket is required to fix the new LED light.