Find trusted local electricians in South Moreton Bay

Supply and install 2.5kW LG AS09 (Newest AI AIR model)

Supply and Install Electrical Cable for New Lighting – Bathroom Ensuite Inclusive of: Running cable from switch location to fitting locations for: • 2 × LED strips • 4 × downlights • 1 × exhaust fan • 1 × feature light ⸻ Supply and Install Electrical Cable for New GPOs – Bathroom Ensuite Inclusive of: • Pulling up cable for existing GPO into roof space • Installing junction box in an accessible location in accordance with AS3000 standards • Running supply cable from junction box to: • 2 × GPOs in mirror cabinet • 1 × GPO next to toilet • Installation of miniature junction boxes to ensure cabling is safe when power is restored ⸻ Supply and Install Electrical Cable for New Lighting – Walk-In Wardrobe Inclusive of: • Removal and disposal of existing light fitting • Cutting 92 mm holes for 2 × downlights • Redirecting existing light switch wiring to the first downlight • Looping new wiring to the remaining downlights • Disconnection of cable behind switch to make safe until fit-off ⸻ Install RCBO • Install RCBO in appropriately sized enclosure • Strip and terminate corresponding cable • Loom and tidy cable • Test and commission

I’m having my bathroom ceiling replaced and need points wired in the ceiling for Plug and play down lights (4) and one for the exhaust fan which is also plug and play. During the ceiling installation the plasterer will mount the lights/fan in position in the new ceiling. I just need the points laid out in the roof ready to be plugged into once the ceiling is completed. Currently has one light and exhaust fan on a double switch, so each has own on/off and would like to keep that set up.

Need a sparky to replace 2 x batten light fixtures with 2 x down lights + an additional down light. Also need to run extra length of cable to move light switch

Hello, We are looking for a licensed QLD electrician to attend our retail store, in Strathpine Centre, to repair multiple faulty downlights (4) in our optometry room. The Issue: The lighting in our optometry room has failed. One recessed LED downlight is completely out, and at least one other is flickering. This has made the room too dark and the flickering is very off-putting, affecting our ability to conduct eye tests properly. The Job: The task is to diagnose and repair the faulty downlights to restore full and stable lighting. The scope of work includes: 1. Safely accessing the light fittings in the ceiling (a suitable ladder is required). 2. Diagnosing the cause of the faults (e.g., failed LED units, faulty drivers, a loose connection, or a dimmer issue). 3. Supplying and installing new replacement parts as needed. This will likely involve replacing at least two LED downlights and/or their drivers. 4. Ensuring all new lights match the existing ones in colour temperature and brightness. 5. Testing the lights thoroughly to confirm they are all working correctly without any flickering. There are 4 downlights altogether. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own tools, including an A-frame ladder suitable for a standard commercial ceiling. - Experience with diagnosing faults in commercial LED lighting systems is essential. - The contractor must be able to supply the necessary replacement downlight fittings. Location & Timing: Location: Strathpine Centre, 295 Gympie Rd, Strathpine QLD 4500 (Exact location will be provided upon acceptance of the offer). When: Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying two new standard LED downlight fittings. Thank you.

I need to install a new ceiling fan and figure out what’s wrong with three others- they either go super fast or dead slow… or also have two sensor lights that don’t work but they turn on when I turn on and off at the switch … I also have a telephone cable that has come down off the house- still attached for the road and working- but is laying over trees- so someone with a tall ladder would be great!

I need a ceiling fan I have bought to be installed - I already have ceiling fans in other rooms but need this ine to be installed in one of the other rooms

Replacing cook top and exhaust in the kitchen. Already bought the new one

Need general electrical check around the house and some repairs. - 8 Downlights need fixing ( see images below ). We had ceiling fixed and original wiring has been left as it for reconnection - 1 Power point in garage keeps tripping so need checking for replacement - Extend Power point for Sofa in TV room - Add extra lighting in two rooms - Inspect all downlights and general electrical check around the house.

Wire a generator into our house power. We're yet to buy a generator, will await your advice. Might be good to get one this weekend during the Black Friday sales?? (The $ amount I've put below clearly doesn't include the generator)

Need someone to remove six panels and rails on the back patio (1 storey, tin roof) after storm damage. Job description: - Turn off DC isolater and inverter - Remove panels, rails and rail feet - Place panels safely in the back yard for suture re-use - Reconnect strings - Ensure solar system works after panel removal The panels need to be carefully removed as they will be reused after the roof is fixed.

I’m building a new shed on my acreage property and I’m seeking a quote for electrical and water connections. Project Details: The shed will be installed near the driveway, approximately 10 metres from where I believe the existing water pipes and electrical cables run. I will need a new trench dug to run: Electrical cabling Water supply line In the shed, I will require: Power points Lighting Air conditioner connection Switchboard/sub-board if necessary Any required safety switches or upgrades to comply with regulations

Need to install an external double power point, and decommission 2 no longer needed external power points, small repair to conduit

I’m building a media wall. I need a sparky to fit some smart downlights in the shelves. 10 total. Also I would like an outlet on a new circuit installed for the electric fireplace. Fix a stalled ceiling fan Move NBN cable to behind the tv. Please make some offers.

Have a coatco light in the stairwell that flickers but doesn't turn on. It doesn't have a globe so need an electrician to get that up and running. The task is for that but my wife is also looking to have a couple of new power points installed as well. If that can be done (and quoted privately) that would be great.

Just need the low voltage side of downlights cabling extended for 4 downlights

TV wall mount (bracket supplied). Jobs: Supply of the downlights and 1 switch x 5(3 outdoors(or 1 flood light) and 2 indoors. I can supply the downlights if you provide me with the details of what to buy for the job.

Hello, We require an call-out from a licensed QLD Electrician to repair a broken and hazardous light dimmer switch at our retail store, in Strathpine. The Issue: The rotary dimmer knob in our main optometry room has broken off. The entire dimmer mechanism and its associated wiring have now fallen back inside the wall cavity. This is a significant electrical hazard and a major operational problem, as our optometrists cannot adjust the lighting for eye examinations. The lights are stuck at half brightness. The Job: The task is to safely retrieve the wiring and install a new dimmer switch. The scope of work includes: 1. Safely isolating power to the circuit. 2. Carefully retrieving the electrical wiring from inside the wall cavity. 3. Supplying and installing a new, standard rotary dimmer switch mechanism and faceplate. 4. Ensuring the new dimmer is wired correctly and securely mounted. 5. Testing the lights to confirm that the new dimmer switch functions correctly and provides a full range of brightness. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own diagnostic tools and be able to supply a new standard dimmer switch. Location & Timing: Location: Strathpine Centre, 295 Gympie Rd, Strathpine QLD 4500 (exact location will be provided once the task is assigned) When: As this is an operational and safety priority, we need this repair completed as soon as possible. Please state your earliest availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the cost of supplying the new dimmer switch. Thank you.

Can someone do Led downlights in my house? House is not occupied so easy to work without a hassle. I need following things to be done -3 rooms install New lights x 2 = 6 new downlights - Bathrooms - replace lights ( 4 pf them) -Replace existing downlights in living areas ( x 7 lights) and laundry and toilet x 2 - replace front and back porch lights x 2 So altogether 21 lights please make sure the LED downlights are bright and color changeable If you could do tomorrow or Monday would be great thanks all

Is there an electrician available in North Lakes to replace four light switches? We’ve already purchased the switches and just need a qualified electrician to install them. We’re offering $150 cash for the job. Thank you!