Find trusted local electricians in Adelaide

70mm ish concrete slab under pavers. Cut strip and stack next to cut ready for electrical conduit.

Qualified registered Electrician to replace batten fix bathroom light with Pendant light plus replace wall light fitting bathroom with new wall light fitting. Then replace existing ball pendant light with new pendant light fitting to living area. Pics in order of old then new for each fixture

I'm looking for a licensed electrician to complete the remaining electrical work at my commercial property in Magill SA. Scope of Works Replace the existing outdoor power outlets with two new 15A weatherproof power outlets. The current installation consists of one 10A outlet and one damaged 15A outlet. Remove both existing outlets and install two new 15A weatherproof outlets, so each LED screen has its own dedicated 15A outlet. Mount two speakers on both sides of the outdoor LED screen. Complete all speaker wiring and connections, including any required waterproof cable joins, testing and commissioning. Replace two damaged LED modules/panels (LED modules supplied unless otherwise agreed). Supply and install one black outdoor waterproof cable enclosure/duct (approximately 1000mm (L) × 100mm (W) × 40mm (D), or similar if more suitable), complete with end caps, beneath the LED screen to conceal the power, data and speaker cables. No painting required. Please use a black UV-resistant, weatherproof enclosure that provides a neat and professional finish. Route all external cables inside the enclosure so that as little cable as possible remains visible. Tidy up the communications cabinet, including: Secure all loose cabling. Properly mount the modem/router. Secure the door access gateway and any other devices currently sitting on the floor or hanging. Test all completed electrical work and provide a Certificate of Compliance (CoC) upon completion. Requirements Must be a licensed electrician in South Australia. Experience with commercial electrical installations and outdoor equipment preferred. Please provide a fixed-price quote, including all labour, materials and GST. Previous contractor has already completed part of the installation. This job is only for the remaining work listed above. Please include your earliest available start date.

Requiring assistance with unplugging soft-wiring and reconnecting. The interconnecting lead has both a male and female end, and the wall converter (with the 3-pin plug) needs to be connected to the corresponding end of the interconnecting lead for the system to receive power.

I need someone who has experience with old houses, need some wiring for a new oven and cooktop… will adjust the price after the site visit

I have a wired smoke alarm that keeps beeping and needs to be checked and probably replaced. I also have a light switch that is loose that needs to be put back into place and checked

Would like our three corridor lampshades replaced with new pendant lights. Ceiling height is quite high - approx 4 metres

Need a licensed electrician to cut/treat 3 visible and easy access cables feeding to a kitchen, one is connecting to a freestanding stove, other two are attached with kitchen cabinet, all three wires are visible and easy to work with. When flexible between 7/July to 11/July but not after 11/July. Hope you can help. Thank you

We need a licenced electrician to add earthing to 2 front heaters and rewire heaters for infrared saunas. Approx 2-3 hours per job Wiring document will be provided once job is accepted

Disconnect the electrical connection of a light fitting and reconnecting it

I need an electrician to install one double 10A weatherproof GPO with an in-use cover on an external brick wall of my unit in Payneham SA. The unit has a tiled roof.

I have an EV charger mounted on a column next to my underground car park in a residential complex. I need a power point installed there which would likely run off the EV charger. I have a photo of what others have done.

Elliptical trainer electrical haven't worked for 3 or 4 years. I would like it to work again.

Security light installed, light switch replaced, outdoor PowerPoint installed and bathroom extractor fan installed

Have issues with trailer electrics had to replace the socket now brake lights stay on have an emergency brake controller not sure which wires go where

Easy job just need a screwdriver I can teach you if you don't know how to do it I couldn't go to the location that's why Go to Bunnings buy a switch Go to location Turn off main switch Unscrew and screw Turn on main switch job done easy money

Remove existing light fitting and replace with a different one. Pictures of the existing one and the replacement one included. Not sure how the new fitting will be held up but hopefully you can also problem solve that.

We require a licensed electrician (or qualified apprentice working under supervision) to complete the second fix only for a relocated kitchen. The first fix has already been completed. All cables have been run and are ready to connect (run cables ready to connect). Scope of work: Connect electric oven Connect electric cooktop (hotplate) Install and connect 6 power points Make necessary junction connections between the old kitchen electrical lines and the new kitchen location Access to ceiling cavity is required All materials will be supplied by us, except junction boxes if required. This is second fix only. No cable pulling or first fix work required. The job is expected to take approximately 1–2 hours. Must be licensed and able to provide a Certificate of Electrical Compliance / completion upon finishing.

Needing electrician for our extensive house renovation First to come out and cap off before demolition (early Feb) and change a couple power outlets then come back to install new lighting (chandelier, 3x pairs wall lights for bathrooms and 1x pair exterior wall lights) you can quote any other work needed on the job when you come to site to inspect Price in ad doesn’t reflect your final price