Find trusted local electricians in Illawarra

Noisy pipes when hot water first turned on. Water is hot. Not interested in replacement heater

Urgent attendance required TODAY – Towradgi NSW. Looking for a licensed and insured electrician who can attend today to assess and, where possible, complete several electrical works at an Airbnb/short-term accommodation property. Works required: Cleaner/storage cupboard Existing power point inside the cupboard, however there is currently no power running to it. Light needs to be installed. Please assess what is required to provide power and install the light/switch, including whether a new circuit is required. External/front light One front external light is not working – investigate and repair/replace as required. Bedroom downlight One bedroom downlight is not working and is believed to be hardwired – investigate and repair/replace as required. External sensor lights Inspect the external sensor lights around the property. Currently only one of the front sensor lights appears to be operating. Investigate the remaining lights and repair where possible. Please only make an offer if you are a licensed electrician and can attend TODAY. Please advise your earliest available attendance time today. Any additional works or materials identified onsite are to be quoted and approved before proceeding.

Seeking a fully licensed electrician who operates with an apprentice or a trade assistant to swap out a wall-mounted 3-door LED shaving cabinet due to a factory defect. The current unit is already mounted with trade prep partially completed. Because of the size and glass faces, it is heavy and strictly requires a two-person lift to dismantle and maneuver. (Only the lead contractor needs to be a licensed electrician). Scope: 1. Dismantle & Unmount: Safely disconnect and remove the defective cabinet from the wall. 2. Mount Replacement: Lift and secure the new replacement cabinet into the existing setup. 3. Connect Electrical: Run the electrical lead inside the cabinet to complete the connection safely. Required Traits: - High Quality: Fragile premium mirror faces require absolute precision and care. - Clean & Tidy: Must clean up all trade dust and packaging materials. - Patient: Delicate job that cannot be rushed. Compliance Note: The new unit arrives at the end of the month and stays sealed until you arrive to inspect it with me. The electrician must hold a verified Airtasker Electrical Badge. Required upon completion: Formal itemised Tax Invoice (with ABN) and a Certificate of Compliance (CCEW) for my active NSW Fair Trading file. Please reply with your total quote

Need someone to install a batten light and to disconnect and connect a new upright cheap stove

Remove and replace batteries for 1 smoke alarm (beeping at the moment) Please include supply batteries on your offer.

Replace old light switches with new ones straight swap out which I have around 10 total. I will supply switched

Licensed and Insured Electrician required to install downlights (3bd house) and a split-system air conditioner (main bedroom). Important SMSF requirements: This work is for an SSMSF investment property. To be assigned, you must be a registered business, provide a formal pdf tax invoice made out to our SSMSF Trust, hold an active ABN, hold a current NSW Electrical License, and have a valid ARC Ticket/Licence for the A/C gas lines. Please do not apply if you cannot provide a Certificate of Compliance (CCEW) upon completion.

Electrician asap for tracking lighting install

I have 17 hard wired down lights that I need converted to plug in. I’ll supply the single power outlets. I’ll also install the new down lights myself. Also need 1 x 4 button light switch installed which I’ll supply as well.

Looking for an electrician for TV wall mounting, with all cables concealed for a clean finish and new PowerPoint. I already have the new 75-inch Hisense TV and Sanus fixed wall bracket, both pictured. The TV currently sitting on the cabinet is being replaced. Work required: 1. Install a new double power point behind the TV cabinet, concealed from view. There is an existing power point nearby on the adjoining wall—see photos. Please leave that existing outlet in place. 2. Install a new power point behind the wall-mounted TV, properly wired and positioned so the outlet and plug do not interfere with the fixed bracket. 3. Supply and install one quality HDMI cable concealed inside the wall, running from behind the TV down to behind the cabinet, with neat cable pass-through/brush plates at both ends. 4. Install the supplied bracket and mount the new TV, securely fixed to suitable wall structure, level and at an agreed height and position. Connect and test everything. Please include any additional person needed to lift and mount the TV safely. The aim is no visible hanging cables, extension leads across the floor or exposed surface conduit. Wall construction and the best concealed wiring route will need to be confirmed. Please quote for the complete job, including labour, electrical materials, HDMI cable, wall plates, fixings, any applicable GST and your Airtasker fees. TV and bracket are supplied by me.

There is a Redback battery that needs replacing of the comms board that helps with connecting it to wifi. Redback has sent the board and it’s on site. Need an electrician to help installing it

Full camper trailer 12V system needs installing per my wiring diagram. Labour only — all parts supplied. Looking for an auto electrician, marine electrician, or experienced 12V/caravan installer comfortable with multi-circuit systems (solar, DC-DC, inverter, fused distribution). Scope: Solar controller + Bluetooth monitor, wired to 1 portable + 2 fixed panels (40A fused) Battery bank: parallel wiring, isolator, 175A ANL fuse, Victron BMV shunt/monitor, inverter wiring Control box: bus bars, 90A isolator, fused distribution (140A/90A/15A circuits), voltage display, labelled outgoing runs Passenger cupboard: fused block for air compressor, water pump, light bar, spotlight, USB/12V sockets, 6-way switch panel (per legend) Internal trailer: front/rear LED strips, USB sockets, 12V socket, trailer plug, 2-way switch panel Standard expected: Crimped/soldered joins with heat-shrink, correct wire gauge, fusing to diagram spec, loomed and chafe-protected runs, clear labelling both ends, full continuity/load testing, correct polarity and isolation confirmed before sign-off. I'll supply: all hardware, full labelled wiring diagram, trailer access, working space/power/light.

Need some slow cookers and extension cords tagged

Samsung front loader washing machine. Not turning on

Looking for a qualified electrician to install two wall sconces and switches and three additional PowerPoints to three rooms. Wall sconces to be inside, wall mounted. House has crawl space in roof and is single story, brick house with roof tiles.

There is a Redback battery that needs replacing of the comms board that helps with connecting it to wifi. Redback has sent the board and it’s on site. Need an electrician to help installing it

Needing a ceiling light installed. Due to old wiring in our home we’ve had trouble doing it ourselves.

Hi Just require an electrician to help install and interconnect x1 smoke alarm to the rest of the smoke alarms. I have the smoke alarm device. Job in Horsley Thanks Time is flexible

3 (existing) 20a power outlets are currently sharing a single circuit breaker Each outlet needs to be connected to its own (existing) 20A breaker Will require new conduit to be installed between breaker and outlet (roughly 6m)

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Stockland Shellharbour, to replace a faulty ceiling light. The Issue: One of the recessed LED downlights on our main sales floor has blown, creating a dim spot in the store and affecting the overall presentation. The ceiling height is approximately 3.5 meters. The Job: The task is to replace the faulty LED downlight. The scope of work includes: 1. Safely accessing the light fitting in the high ceiling (a suitable ladder is required). 2. Diagnosing the fault (e.g., failed LED unit or a faulty driver). 3. Supplying and installing a new, suitable like for like replacement LED downlight and/or driver. 4. Ensuring the new light's colour temperature and brightness matches the other existing lights. 5. Testing the new light to confirm it is fully operational. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an A-frame ladder appropriate for a high commercial ceiling. - The contractor must be able to supply a replacement LED downlight and driver. Location & Timing: Location: Stockland Shellharbour, 211 Lake Entrance Rd, Shellharbour City Centre, NSW 2529 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new LED downlight fitting. Thank you.