Find experienced deck builders in ACT

on concrete floor its one meter high deck and on the pool its 1.5 meter height deck needed. prefer a day rate tradesman who can start in stages, first stage on the lower side concrete area deck with steps.

Require Rangehood to be installed above my barbecue on back deck. There is a solid wall and roof around barbecue

I am looking to get offers on oiling my deck before I decide how I want to proceed. I have all of the aqua deck tools and oil for the job.

require the pool deck structure pictured to be dismantled (fencing and the wooden structure). disposal is NOT required- just labour to dismantle the structure and stacking materials in piles. will involve undoing bolts and removing nailed-in panels

There was a water feature at my side yard which I have drained out and filled it with pebbles and bark mulch The area needs to be screwed with decking timber similar to the existing decking in place

I have an approx 4 m x 4m wooden deck that has been painted previously. the paint is chipping and Id like it sanded back then oiled

Reseal three small decks (decking oil supplied)

Need to build a trap door on a deck (area currently has removable planks). The trap door should be secure for people to walk on it when closed. Loose planks are available for use.

I need an old recliner moved from my back deck to The skip next to the house. I would then like my large wicker chair on my front deck to my back deck.

An extension to the side of our existing deck. About 3m by 3m, 0.5 m off the ground. We have the materials.

I have a steel deck roof on a carport which is approximately 6.5 metres wide. I need approx 90mm trimed off the width.

I'd need someone to finish demolishing an old deck

Deck needs sanding and oiling in dark stain Color is wearing off

I am looking for an experienced and reliable tradesperson to restore my timber deck, ramp, and stairs, including painting the balustrades and frame. The deck is structurally sound but has significant surface weathering, patchy staining, and some mould in shaded areas. The scope of work includes: 🔨 Scope of Works 1. Inspection & Preparation • Inspect deck, ramp, and stairs for loose fixings or damaged boards (replace or secure if required – small allowance included in your quote). • Fill and sand any patched areas on balustrades and frame. 2. Deck Cleaning & Treatment • Apply commercial-grade deck cleaner/brightener to remove dirt, mould, and greying. • Pressure wash and allow to dry fully. 3. Sanding • Machine sand deck, ramp, and stairs to remove old finish and smooth timber (approx. 30–35 m²). • Edge sand and hand sand around posts and stairs. 4. Coating – Deck • Apply 2–3 coats of high-quality decking oil or stain (Cutek, Intergrain, or Cabot’s – to be confirmed with me before starting). • Include anti-slip additive in the final coat on stairs and ramp for safety. 5. Coating – Balustrades & Frame • Sand, prime (if needed), and apply 2 coats of exterior-grade paint (e.g., Dulux Weathershield) to all balustrades and frame. 📏 Approximate Areas • Deck, ramp & stairs: ~30–35 m² • Balustrade/frame: ~20–25 linear metres ⸻ 🛠️ Requirements • Proven experience with deck restorations or exterior painting (please provide photos of past work). • Own equipment (sander, applicators, pressure washer, PPE). • Use quality products (discuss and agree before purchase). • Must leave site tidy and safe at the end of each day.

Looking for someone to build a deck around the spa. Area I think is about 6m by 6m. Looking at having a couple of stairs and the spa to only be half under. Looking at also having seating and maybe a fire pit. Offer is just for quote

We require someone who can sand the wooden deck. Measurement: 1018cm length and 346 cm width.

Paint deck, door and seating.

Stain front and back decks, timber screens and outdoor table. Refresh paint on railing

Construction of wooden deck along the lines of attached image. Dimensions: 230 x 300

A couple (2 or 3) decking boards are popping up a little and need screwing down with long screws. Needs an electric screwdriver and long screws with strength to hold them down.