Find experienced deck builders in Brisbane

We need a skilled person to build a deck out the back of our house use the following designs. Access is available from now and looking for it to be completed by end of month. We will supply what is in the design.

Sketches and photos describe request to add in a piece of composite deck. Timber and decking here need your skills, tools and fixings.

Need a 78m2 Composite deck constructed on concreted area, relatively flat area need 90x45mm timber joist to make even with floor area

Build a small (2x2m) composite deck in my courtyard. I already have the decking boards (eko-deck) and fixings. Builder to supply and install joist and associated fixings for frame. Strong preference for someone who has worked with composite decking in the past. Location is at an Airbnb so forward planning required for job to be complete at a time when there are no guests at the location.

A cupboard to cover laundry area Composite decking 3x3 m area

Need to install composite deck surrounding my pool area .total area 30 sq mtrs. material to be supplied by me

Decking materials would be supplied but would need nail gun and circle saw to cut and measure decking

We have a spa built into our deck that needs draining- this involves army crawling under the deck to release the valve - we want to cut into the composite decking around the spa to create a manhole that can be accessed to avoid the crawling. Needs to be neat and secure. Decking is composite

I need composite decking (brite decking) installed around our pool. Area is approx 3x2. I haven’t ordered decking - I was hoping I’d find someone on here who has experience and can order & install as soon as possible. - Due date: Flexible

All materials provided (decking, fasteners etc) Footings and half joists already fixed in place. Approximately 1 days work.

Looking for a qualified carpenter to do non-structural repairs and refurbishment to timber deck and stairs. Problem areas identified in the pictures - some mould/splitting of decking, loose boards at the top of stairs, grey cladding to be repaired, stair treads to be repaired/replaced

Three timber boards have rotten in one spot. Three boards or large section of each board need to be removed and replaced with new sections ready for painting. Boards are approximately 5408mm in length and 93mm in width. New boards to be supplied and old boards and any rubbish removed need to be part of the quote.

External timber deck repairs and staining inc handrails Will also need some timber boards replaced

Hi all, I need to sand this deck ready for stained. I’m only looking for sanding not painting. Must be done next week probably Wednesday. Only serious and experienced trades. Thank you.

We have a small timber deck with stairs that I believe needs sanding and refinishing, and the front panels of the stairs need new timber panels. But I would be interested in hearing what you think needs doing. Thanks, Lena

I need a 3.2m X 3.2m timber deck sanded, resealed and coated.

2 jobs both around Hendra Job one : 15 sqm timber deck ( balcony of a house which is over the garage) need complete repair. Bearer need complete replacement not sure about beam. Job two: Outdoor deck which just need replacement of bearer . Around 12 sqm

Undercoat and paint the underside of this timber deck. Colour is Colorbond Woodland Grey using dulux Weathershield and appropriate dulux undercoat(s). Include supply of paint and materials in quote. Thanks

Decking timber, some with nails/screws in, for removal. See picture

What needs to be done: 1. Pickup of Materials: • Collect pre-paid decking from Bunnings: 140 x 19mm SpecRite Merbau Pre-Oiled Decking - Random Lengths. • Confirm pick-up details with me prior to collection. • Transport decking materials to the house in Bardon. 2. Replacement of Decking Boards: • Replace the rotten decking boards located on the left-hand side of the deck, as indicated in the provided photograph. • Carefully remove the old, rotten boards to avoid damage to the existing deck structure. • Install the new timber decking, ensuring secure fastening and alignment with the existing structure for aesthetic continuity. 3. Disposal of Old Boards: • Remove all old, rotten timber boards from the property. • Dispose of the old boards responsibly at an appropriate facility. Materials Provided: • Decking boards (140 x 19mm SpecRite Merbau Pre-Oiled Decking - Random Lengths). • Decking screws will be supplied. Requirements: • Required to bring your own tools for the job. • Use appropriate tools and techniques for removal and installation to ensure no damage to the deck structure. • Ensure the new boards are securely fastened and aligned properly. • Leave the site clean and tidy upon completion of the work. Additional Notes: • The pre-oiled decking boards are ready for installation but should be inspected upon pick-up to ensure no defects.

Someone to please clean and oil our 5m x 4m timber deck. Decking oil provided but not any other equipment. Thank you

Need floor sander to sand existing deck

Needing 3 deck areas cleaned and stained. Deck 1 is 4x3m, undercover bbq area Deck 2 is pool deck, around 4x10m Deck 3 is upstairs balcony, approx 4x5m

I am wanting to extend my existing timber deck across our back yard. It would be roughly 7m in length x 6m in width. The current deck is raised from the ground so would require stumping.

Timber deck requires repaint. Small area to be sanded to remove dull greyness from weather. Area to be sanded is 6 sqm Area to be painted is 32 sqm Previous paint used was Merbau tinted decking oil. Happy to use the same again. Deck will be washed prior (the day before) so just sanding and painting required. Let me know if you need any additional information. - Due date: Flexible

Timber pool deck requires repair. Requires packing under sagging joists to provide support and screwing back into existing timber beam which is attached to the coping concrete. One small part of decking is rotten and requires replacement (photo attached). The rest of the deck is sound. - Due date: Flexible

Small timber decking area has become unstable underfoot on one half (closest to gate - in picture). Heavy rain from last year may have caused this. Some boards "dip" when walking on, some "flip up". Mostly, that half of the deck feels generally unstable. There are also some boards that need to be screwed down (not nailed) as they tend to bend up when only nailed. Looking for a cost effective solution as selling in near future. Happy for existing boards to be reused as they look ok. I think it's mostly under the deck that needs fixing. But I'm not an expert in these things! - Due date: Flexible

To restore timber deck and wall - Sand - Coat - Paint - Due date: Flexible

Approximately 6-8 damaged decking boards are in need of replacing. Own equipment and collection of materials would also be required. Price is negotiable depending on costs. - Due date: Flexible

The spa needs to be removed so that we can rebuild the deck so needs to be pulled out and removed - Due date: Flexible

Looking to get quotes for a deck built in garden.approximately 3m by 7m