Find a reliable computer and IT professional in Tarneit

Build my trac racer racing simulator Quote to build it as beginner just need someone to do it for me as I have no idea how to do it

Data point installed in bedroom to move my modem there

Need someone to securely install and inspect a Brateck E350 monitor arm at my home in Tarneit. The monitor arm was previously installed but the monitor arm/post became loose and the monitor hit the wall. I need someone experienced with monitor arm installation to: • Inspect the Brateck E350 monitor arm and mounting hardware • Verify all screws, grub screws and locking mechanisms are present and correctly tightened • Securely clamp the arm to the desk • Mount my ASUS VA24DCP 24-inch monitor • Check stability and ensure it is safe to use • Advise if any parts are damaged or missing and need replacement Please bring the required Allen keys and basic tools. Preference for someone with experience installing monitor arms, TV mounts or office furniture. Location: Tarneit, VIC Expected duration: 30–60 minutes.

Got milk in side the screen and in keyboard but all is working but milk is visible in screen

While turining the power on from wall socket it lights up for a second and dies down - No noise - nothing Tried differernt socket, cable, checked for jams etc.,

I have NBN FTTP installed, along with multiple data/network wall sockets in the property. At the moment, the sockets do not appear to be connected to the NBN service. I need a technician to assess the cabling and connect the relevant sockets so they can be used for internet access.

Looking for a licensed cabler to run a single Cat6 ethernet cable from the bedroom near the entry to the kitchen in my single storey home in Tarneit. Distance is approximately 5-6 metres on the ground. Cable will need to run through the roof cavity with wall plates at each end. There was an old NBN connection in Kitchen and new NBN fibre connection was set up in entry Bedroom. I am having trouble with wifi speed now. The purpose is to connect a second router in the kitchen for better wifi signals. Happy to discuss the best route on the day.

Run through some Ethernet and power cables for provision of power socket in an under construction house

My desktop pc is not recognising my keyboard and mouse upon starting.

Got 2 printers brother - for which ink is not detected - WiFi Other is Fuji xerox CP405 d with cable not able to install driver without CD

I need one data port to be done in my work room so I can plug my modem directly in it. Currently there is two in two living areas only and connection become slow from the room I work from.

We need someone to help hook up Telstra modem in a new home located in the marigold estate

Set up obs studio on mac for professional streaming and recording

The setup was finished almost 60% need to setup rest of it

I need my Lenovo L13 yogas battery and screen replaced as it is causing the laptop to not function at all

It is a single story house. 1. Install a wifi router to the ceiling 2. Install cat 6 cables to the router 3. Install ethernet outlets x 3 4. Replace existing 2 jack RJ45 wall plate with 5 jack RJ45 wall plate

Nbn socket is broken. Lookimg for someone tomfox it

A while ago I spilled a large amount of water over the keyboard area of my Alienware M15 r6 laptop. It shut down instantly and has never turned back on since. I need someone who can open it up, check the internal damage, clean or repair the affected parts, and let me know if it can be brought back to life. It’s completely unresponsive, so I’m looking for someone with experience fixing liquid-damaged laptops.

SSD drive has bad sectors and read errors. drive cannot be diagnosed remotely.

I need an experienced PC hardware technician to inspect and test a desktop PC that was in a fire-affected environment, although the PC itself was not touched or damaged by flames. Since the incident, I have not tried turning it on. I want a professional who can safely check the system first, as fire-affected electronics normally require proper cleaning and inspection before powering up. Fire Impact: There is no visible burn damage to the PC. Only possible smoke or soot exposure. Professionals usually clean fire-affected electronics using safe methods (anti-static cleaning, solvent-based soot removal, drying), and I need someone who understands this process. What needs to be checked: * RAM * SSDs * Processor * GPU * Power supply * Motherboard and power delivery * Safe inspection and controlled first power-on * Identify if cleaning or component replacement is required PC Specifications: * Motherboard:** Gigabyte Z890 Aorus Elite Ice WIFI 7 - DDR5 * CPU:** Intel Core Ultra 9 285K | 5.7 GHz | 24 Cores 24 Threads * GPU:** Zotac RTX 5070Ti Solid OC - 16GB * RAM:** 64GB G.Skill Trident Z5 RGB 6000MHz CL30 (2x32GB) * PSU:** 850W FSP VITA-GM 80+ Gold ATX 3.1 * Cooling:** Aftershock Glacier Mirror 360mm * Storage:** 2TB Gen4 Silicon Power US75 NVMe (Primary) * Storage:** 2TB Gen4 Silicon Power US75 NVMe (Secondary) * Case:** NZXT H9 Flow - White Looking for someone who can: * Inspect the PC safely before applying power * Clean any soot or residue if needed * Test each component individually * Confirm which parts are functional * Provide a clear diagnosis and next steps If you specialise in PC diagnostics, fire-affected electronics, or advanced hardware repair, please share your experience, pricing, and availability.