Find experienced local carpenters in Inner South West Sydney

Carpenter/Gyprocker /builder Wanted – Garage Partition Wall with Door Looking for quotes to build a Gyprock partition wall approximately 2.8 metres wide, 2.2 meters height with an entry door, across my garage. Work includes: * Timber or steel framing. * Insulation and Gyprock on both sides. * Supply and installation of door, jamb and handle. * Plaster finishing, skirting and painting. Please send your availability, licence and insurance details, and a quote including labour and materials. Site inspection welcome.

We have a bathroom in a childcare centre and we would like to install a timber panel that is attached to the floor to give children a bit of privacy when they are going to the toilet but still able to help them if they need assistance. Attached photo of purple panel is an AI mock up. Would need to inspect it in person to see what is possible

30 year old kitchen cabinetry hinges require repair or replacing to prevent doors from falling. Need to ensure doors open and close smoothly and are aligned properly.

Carpenter/Builder Wanted – Garage Partition Wall & Door Looking for an experienced carpenter or builder to install a partition wall across my garage in Bass Hill, NSW. Scope: * Wall approximately 2.8 metres wide, height to be measured. * Framing, insulation and plasterboard on both sides. * Supply and install an entry door, frame and handle. * Plaster finishing, skirting and painting.

Require an experienced and highly skilled cabinet maker or qualified carpenter to help me design and build a set of cabinets underneath curved stairs. Please quote for your time and tools, equipment only. I'll pay you for materials separately and as agreed General handyman, builder or other trades will not be considered.

installing cabinet doors for wardrobes doing handles , adjusting and fillers

Need a hole made in a stainless steel sink. Needs to be 35mm. Quick easy job if someone is interested

Hi there, ​I am looking for an experienced carpenter/cabinet maker to assemble and customise IKEA furniture at my house in Milperra. All flatpacks are already delivered inside the room. I am strictly looking for a seamless, custom built-in finish for the wardrobe. ​Job Scope 1: IKEA PAX Wardrobe (3.25m Wide x 2.36m High x 58cm Deep) ​Assemble all frames, doors, and internal fittings. ​Custom Built-in Finish (Top & Bottom): Create a bulkhead to the ceiling and seal the gaps. At the bottom, install matching skirting boards to hide the plinth. ​Power Outlet Cutout & Lighting Installation: Precisely cut a neat hole in the thin PAX backboard to expose an existing wall power socket. Route the cables for the IKEA interior lighting system and plug it directly into this newly exposed outlet. ​Job Scope 2: Laundry Room ​Assemble and securely mount 3x IKEA wall cabinets to wall studs. ​Securely mount a metal clothes hanging rail (provided by me) to the bottom boards of these cabinets. ​⭐ EXTRA HANDS AVAILABLE ON-SITE ⭐ My husband will be available to act as your second pair of hands for the entire job. He can help lift the heavy PAX frames, hold the laundry cabinets perfectly in place while you level and drill, and assist with any heavy lifting. Not need a second person. ​Material Supply for Built-in: Please let me know in your offer if you can supply the framing timber, white melamine/MDF boards, skirting boards, and gap filler required for the built-in finish (I will pay for these material costs separately). Alternatively, let me know exactly what you need me to purchase from Bunnings beforehand. ​Requirements: ​Proven experience with "IKEA PAX Built-in Hacks" and neat cable routing. ​Bring all your own professional tools (circular saw, stud finder, laser level, drill, etc.). ​Please bring drop sheets to protect the flooring. ​Location: Milperra, NSW (Ground floor, easy parking). Time: Flexible. Please include your estimated completion time in your offer. Thanks!

Need general timber maintenance around the home (sanding, oiling, painting, gap filler). Quite a few areas so looking for someone to provide an hourly rate

Need a few carpentry jobs done 1) Reinstall Kitchenette in Granny Flat 2) Install few internal doors 3) Put some missing slats on deck

Need a carpenter for framing my grant flat. Will pay day labour and have labourers to help. Needs to have experience. All materials provided. Start asap

I’m looking for someone who can take down an old bathroom cabinet & build and put up a new one. The measurements of the old one are 60cm x 70cm & the new one is roughly 65cm x 70cm.

Hello, We are looking for an experienced handyman, cabinet maker, or carpenter to repair a broken drawer front at our retail store, in Westfield Hurstville. The Issue: The timber front face of one of our main under-counter glasses storage drawers has completely broken/riipped off the drawer box. The drawer became jammed and had to be forced open, which pulled the face off, splitting the internal MDF backing where the brad nails were secured. The loose timber face has been set aside. The Job: The task is to securely re-attach the timber drawer front to the drawer box. The scope of work includes: 1. Preparing the back of the timber drawer front and the front of the white drawer box (removing old nails/staples). 2. Repairing the damaged MDF backing on the timber front using a strong wood glue, epoxy, or timber blocking to ensure a durable bond. 3. Securely mounting the timber face back onto the drawer box (recommend screwing it from the inside of the box for maximum strength). 4. Checking and adjusting the drawer runners/tracks so the drawer opens and closes smoothly without jamming. 5. Checking the adjacent drawer to ensure it is also aligned and operating smoothly. Requirements: - Proven experience with cabinetry or furniture repairs (specifically re-securing drawer fronts and repairing split MDF/timber). - You must supply all your own tools and materials (heavy-duty wood glue, clamps, screws). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Westfield Hurstville, 3 Cross Street, Hurstville NSW 2220 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a quote for the complete repair. Thank you.

Approx. 27 m long × 2.5 m high (approx. 67.5 m²), one visible side. Scope: • Thoroughly clean and prepare timber • Sand weathered/rough areas and provide an even finish • Apply two coats of supplied exterior Merbau timber stain/oil, following manufacturer instructions • Protect paving, plants, pool glass and adjacent surfaces from dust/stain • Include all labour, drop sheets, masking and cleanup etc Materials and equipment supplied including hand sander, stain and applicator. Please quote based on experience with Merbau/timber screening and advise estimated duration. Photos attached.

I need to fix the cracked damaged door or replace it new one dimensions 720x2010x35mm, Plz include sourcing door painting, patching and you can disposal it at council recycle area at basement carpark, also fix the sliding door in the laundry, plz see photos.

Looking for an experienced carpenter to repair a stuck and misaligned 1970s wooden window at my single-story house in Padstow — the sash appears jammed and needs realignment so it opens and closes smoothly again. I’d also appreciate your advice and a rough quote for assessing and repairing the remaining wooden windows around the house while you’re on-site.

Build a unit of draws and shelves please . Need someone that can do it properly please. Picture shows what the final product should be.

The varnish on our wood floors need fixing, this spot and a smaller spot

I am looking for someone to cut and install a wood shelf in this gap in my garage. The shelf should be secured against the wood poles as the wall is gyprock and not very strong. We will pay for materials, but you bring the tools.

Supply and install 7mm plywood sheeting to wall and ceiling openings as per photos. Areas include approximately: • Ceiling section 2.4m x 1.2m • Ceiling section 2.0m x 1.1m • Wall section 2.4m x 2.6 m • Wall/window section approx 3.8m x 2.6m with cut-outs around windows and services Works to include: • Measure and cut plywood to suit openings • Fix plywood securely to existing timber framing • Trim and neaten edges where required • Supply all materials, screws and fixings • Remove rubbish and leave area tidy Ready for next stage/painting after installation.