Find experienced local carpenters in Palmwoods

Revised Advert I need someone to build a strong outdoor frame A3 size or larger that can withstand QLD weather and that displays symbols that people with low literacy levels can understand. See photo. Needs to be completed to a very high standard. Prompt completion of work will be highly desirable. More info for chosen candidate. Please only apply if you are confident you can complete this to an exceptional standard. Thanks for reading 100 is not actual price.. Please state a reasonable price for materials and work in your reply. You would need to be based on Sunshine Coast.

New build , 2 sections of the wardrobe needs to be unattached from wall and moved 9cm each. 2 side sections of archetrave to be removed also. Join front and top section of pre cut pine at a right angle to fill gap in the centre if the wardrobe. $200neg

Install a absco garden shed on slab - Due date: Flexible

Just wanting a few mms off kitchen cabinet to fit in new stove/oven . Also 5mm off from bottom of cabinet

Replacing rotten fascia boards and repair in general area on single story house and shed. Looking for someone who can do it before the end of May.

We have two shelves we need to put up (approx 1.5 m). It's the timber slabs you can buy from Bunnings that we used for our benchtop. We'd like them put up in that floating shelf style so you can't see the brackets. We do not have the brackets, but can provide if we are given a list. - Due date: Before Friday, 10th Dec 2021

Handyman needed to put up wall partition in storage room in garage - the existing room is approximately 2.5m x 3m.. I need a partition in the middle to create two sections to the room; and a new architrave and door installed to access the second half new section. Both sides to new partition and all internal walls need to be lined (currently no internal panels); and all internal walls need to be painted. I also need a 1.5m hand trough installed out side this room (I have the unit, it just needs to be hung on the outside wall.)

I am looking for a qualified carpenter to help build a (lux) composting outhouse on stilts - as position is on a slope, with space for composting unit underneath (Clivus Multrum™ CM8 Next Gen). On the ground level we’d need to install a shower. Area has recently been cleared by excavator. Photos of area and rough drawings provided here. Open to discussion about possible solutions and would love to organise quoting and assessment in person before locking it in. It’s a fairly big job obviously. Thank you!

Timber Deck needs to be sanded and coated. Sundamaged in some areas. Size is approx 28m2. Deck handrails, verticals and screens around the bottom also need to be done. Photos attached

Carpenter skills an advantage to re sheet laundry and install cupboards/bench top. But plenty of garden work. Weed, plant,mulch.

Moving a shed full of future from palmwoods to Mooloola Valley

I need benchtops changed and a kitchen modified to put a stove in rather than a benchtop hotplate. The doors and draws will remain.

Ineed to install a shed 3.4x5.8x2.5

Treated pine deck 3.7m x 1.5m outside bedroom with 1.2m rail on 2 sides. Distance from ground to bottom of deck is around 2m. Current window is 1.8m W x 1m H. Would need to expand opening to fit Stegbar SD2018 (or equivalent) sliding door which is 1.8m W x 2.1m H. Wall is timber frame with fibre cement sheeting.

I have two built-in wardrobes that have the fit out already in, there's just some finishing I need help with. I have all the materials just need someone with the know how and the right tools. The walk-in robe will need cornice and skirting removed. Cornice redone/sealed so the wardrobes can sit relatively flush. I can put the flat packs together, will just need help finishing it off. I have an exterior painting and a fencing job needed as well. If you can do all three that would be great!

Sealant kitchen bench where bench surface meets wall.