Find experienced local carpenters in Doonan

Put together pre fabricated cubby house - Due date: Before Wednesday, 29 November 2023

I need someone with a laser level to level my 8.4m Tiny House with is on a trailer. The Tiny House has 4 manually operated stabilisers and 6 wheels. The instructions says: 1. The midpoint or middle axel and wheels of your trailer acts as datum point, which you will use to transfer/level this point height to the front and back of the trailer. This means the front and back of the trailer must be levelled from the middle of the trailer. This is crucial as the weight and stability of the house rests on the axles and wheels of the trailer. 2. Position a laser level underneath your house and near this middle point. Now measure with left and right side near the middle axel, from the underside of the floor to the laser line. These measurements on both sides should be similar if the tyres are on a firm and levelled foundation. 3. Next step is to transfer this height to the front of the trailer as it has most of the weight. Again, measure from there underside of the floor in both front corners (left and right) close to the stabilisers, to the laser line. Once a height has been obtained, use the stabilisers, winding either up and down, to achieve the same height as the middle measurement. 4. Proceed from the front of the trailer to the back. Measuring from the underside of the floor again, determine a height in both corners close to the stabilisers. Adjust stabilisers to again match the middle measurement. 5. Once this is done, again check all points. • Middle axel left and right • Front left and right • Back left and right Ensure the same measurements are being achieved at these points: from the underside of the floor to the laser line. Some small adjustments may be needed. Your house will now be sitting in a level and stable position. - Due date: Before Thursday, 9 November 2023

I need easy 2.25 x 1.5 gable slider Easy Shed garden shed picked up from Mitre 10 Kunda Park and assembled and placed on prepared concrete base - Due date: Flexible

Hello, I require a skilled tradesman to assemble 10 (1.2 x 1 meter each) wooden pallets into an outdoor deck to be placed under my caravan awning. The pallets are ready to go only require connecting in a way that they can be easily disassembled. The total size will be 6 x 2 meters. There is a slope on the land so it will require levelling/raising with besser blocks/ wood. I would like someone to come by and view the site first, purchase the stumps as required or recommend what needs to be purchased, and complete the assembly. This job can be completed anytime from this weekend (once land is dry) up to mid next week. Thank you! Mon - Due date: Before Sunday, 18 June 2023

Erect a shed kit 6mx7m shed with 3mx4m roller door, with a 6mx6m garaport and a 7mx3.5m lean too. Insulation on shed only 1 pa door 1 window - Due date: Before Saturday, 14 January 2023

6m x 3m easy shed to be be erected onto concrete slab - Due date: Flexible

I am looking for someone (I think 2 people will be required) to assemble a 3m x 3m shed (from Bunnings) - see attached pic. A concrete slab for the shed is ready to go, please see attached pic. Shed description can be found here https://www.bunnings.com.au/absco-sheds-3-00-x-3-00-x-2-06m-premier-double-door-garden-shed-classic-cream_p3310156

We have two bedrooms that need wardrobe doors installed on them, preferably matching the same coloring. One bedroom has wardrobes that face each other, the other room has only one side that needs to be covered. Otherwise white panels will do. Would like to get this done ASAP. Based on Doonan. Please note each drawer width is a totally different size. So can use the same door panel size in each room. Wasn’t sure on price so put anything down. Many thanks.

Hi we have a butlers pantry and want to take out the Perspex panels and put in board and a window in the middle. We are getting rid of it and the cabinetry as there is some mold and have worked out it stems from where the Perspex and boards meet. We also need a window for more ventilation. All you need to do is rip out Perspex, replace with sometype of boarding, add a window and we will get new cabinetry put in afterwards. Please see photos and see if this is the job for you. Have no idea about pricing so open to all offers. Many thanks

I’m looking forward a labourer or junior carpenter to assist on various projects. Consistent work for the right person. ASAP start

I need replacing existing kitchenette benchtop with a new one. Please only include work in your quote, I have the new benchtop

Need gyprok building skills

Large deck (approx 10x10m2) requiring replacement of timber boards and some framework

I need someone to build a small pine deck. Approximately 3 x 4 m. They would need to come and quote me first.

Hi, My job expired & I didn’t get to see your quote in detail. I needed two steel doors made to fit our shed so that it is enclosed & watertight. There is the arch at the top which will need to be filled in & doors attached to that,most likely two that open out. I cannot find your business details on your profile,Airtasker makes it difficult to get in contact but would obviously like you to come out & inspect to offer a proper quote. Thanks

Hi, Looking to see if someone might be able to make some doors for our shed.Preferably a roller but swinging doors will be fine,you may have to mount something across the top so the doors secure to that & not the shed as it may effect the structural integrity. Shed opening is approx 6m wide & highest point is 2.4m. Located in doonan