Find experienced local carpenters in Inner South West Sydney

Need custom built in joinery for a home office. I have a design in mind but happy to chat. Project must be completed by mid December. Budget is reasonably flexible.

2 x 2m timber backdrop on wheels

Wall 1. Need panelling finalised in void area were marked in black 7 pieces only (5.4m length ) will need another day to finalise bottom half after expansion joint installed . MDF board also needs to be nailed in both walls. Will be supplied Wall 2. Need to install 50mm panels on wall just as in attached design photo. Install only top half for now. Must use laser and level must be dead straight Liquid nail supplied along with all timbers Outdoor needing needs fixing in some sections mainly just corners we have 2 length / peices on site Must be experienced with good feedback More work available

Hi, I’m looking to add a storage cabinet underneath the kitchen benchtop overhang to extend my kitchen storage space.The dimensions are approximately:W: 188 cm, Lengths: 54 cm, Depth: 24 cm I want a cabinet that fits neatly underneath the existing benchtop. Please give me a quote for this job ! Thanks

One of the timber steps on my internal staircase has collapsed and needs repairing. The carpet and underlay have lifted, exposing the timber underneath. Looking for an experienced carpenter to inspect the supports, repair or replace the damaged step, make it structurally safe and refit the carpet if possible. Photos attached. Located in Milperra, NSW. Please provide a quote including labour and materials.

Our joiner and kitchen company that we used cannot complete the required works to our home as they are shutting their business down so we have been left with an unfinished house. We require the works to be finished for two vanities for the two bathrooms, for the kitchen we require the shelves installed which we have in the home just need to be installed and we require someone to make a range-hood cover / please see photos - we have all the plans so it just requires someone to complete in a few days. They have also left most of the material in our home. We need this completed by month end before our elderly family come stay with us, we just need someone reliable, happy for someone to come in and provide us with a quote to complete.

Build a bathroom floor cabinet. Drill 4x vinyl CD hangers on a wall

Help carpenter do laminate floor and other tasks as necessary

I am wanting to make this artwork and need help with cutting timer to look like this frame with scalloped edges. I will provide all of the materials.

Need a carpenter for framing my grant flat. Will pay day labour and have labourers to help. Needs to have experience. All materials provided. Start asap

I’m looking for someone who can take down an old bathroom cabinet & build and put up a new one. The measurements of the old one are 60cm x 70cm & the new one is roughly 65cm x 70cm.

Hello, We are looking for an experienced handyman, cabinet maker, or carpenter to repair a broken drawer front at our retail store, in Westfield Hurstville. The Issue: The timber front face of one of our main under-counter glasses storage drawers has completely broken/riipped off the drawer box. The drawer became jammed and had to be forced open, which pulled the face off, splitting the internal MDF backing where the brad nails were secured. The loose timber face has been set aside. The Job: The task is to securely re-attach the timber drawer front to the drawer box. The scope of work includes: 1. Preparing the back of the timber drawer front and the front of the white drawer box (removing old nails/staples). 2. Repairing the damaged MDF backing on the timber front using a strong wood glue, epoxy, or timber blocking to ensure a durable bond. 3. Securely mounting the timber face back onto the drawer box (recommend screwing it from the inside of the box for maximum strength). 4. Checking and adjusting the drawer runners/tracks so the drawer opens and closes smoothly without jamming. 5. Checking the adjacent drawer to ensure it is also aligned and operating smoothly. Requirements: - Proven experience with cabinetry or furniture repairs (specifically re-securing drawer fronts and repairing split MDF/timber). - You must supply all your own tools and materials (heavy-duty wood glue, clamps, screws). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Westfield Hurstville, 3 Cross Street, Hurstville NSW 2220 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a quote for the complete repair. Thank you.

Approx. 27 m long × 2.5 m high (approx. 67.5 m²), one visible side. Scope: • Thoroughly clean and prepare timber • Sand weathered/rough areas and provide an even finish • Apply two coats of supplied exterior Merbau timber stain/oil, following manufacturer instructions • Protect paving, plants, pool glass and adjacent surfaces from dust/stain • Include all labour, drop sheets, masking and cleanup etc Materials and equipment supplied including hand sander, stain and applicator. Please quote based on experience with Merbau/timber screening and advise estimated duration. Photos attached.

I need to fix the cracked damaged door or replace it new one dimensions 720x2010x35mm, Plz include sourcing door painting, patching and you can disposal it at council recycle area at basement carpark, also fix the sliding door in the laundry, plz see photos.

Looking for an experienced carpenter to repair a stuck and misaligned 1970s wooden window at my single-story house in Padstow — the sash appears jammed and needs realignment so it opens and closes smoothly again. I’d also appreciate your advice and a rough quote for assessing and repairing the remaining wooden windows around the house while you’re on-site.

Build a unit of draws and shelves please . Need someone that can do it properly please. Picture shows what the final product should be.

The varnish on our wood floors need fixing, this spot and a smaller spot

I am looking for someone to cut and install a wood shelf in this gap in my garage. The shelf should be secured against the wood poles as the wall is gyprock and not very strong. We will pay for materials, but you bring the tools.

Supply and install 7mm plywood sheeting to wall and ceiling openings as per photos. Areas include approximately: • Ceiling section 2.4m x 1.2m • Ceiling section 2.0m x 1.1m • Wall section 2.4m x 2.6 m • Wall/window section approx 3.8m x 2.6m with cut-outs around windows and services Works to include: • Measure and cut plywood to suit openings • Fix plywood securely to existing timber framing • Trim and neaten edges where required • Supply all materials, screws and fixings • Remove rubbish and leave area tidy Ready for next stage/painting after installation.

I need my side board fixed .I believe there is a manufacture fault in the input of the holes , I would need some one professional that understands and that can fix this problem and level out the doors please , also another manufacturer fault the back side holes were incorrectly put uneven also , I couldn’t put the back side in because it was uneven. I believe new holes would need to be made in order to be even