Find experienced local carpenters in Armstrong Creek

I have purchased a dog kennel for my puppy, and was hoping to have a dog run built around her kennel, one with mesh/rio sides and top. Approx 3500m long, 110mm wide & 1000m high. Must be solid, built with experienced & quality workmanship that will withstand being in VIC weather. Will have to be built around level of deck and grass area. Grassed area will need a mesh/rio bottom to prevent digging out. Thinking 2 doors, one near her kennel & one at the grass end. Kennel due May 23rd so anytime after this would be great. Materials incl in price. You’re welcome to come to the house to chat with me and quite prior to the 23rd. Thank you 😊 - Due date: Flexible

Need a laminated floorboard repaired or replaced prior to leaving premises. Will supply materials

Looking for someone to help me cut some MDF pieces to make display earrings for my small business - Due date: Flexible

Looking to have a simple overhead wall mounted cupboard and two shelves made and installed in laundry (made to match current cabinetry. Style similar to the image. - Due date: Flexible

A 3 x 2.9 garden shed assembled with timber edges to bolt it to. If I could please get a time frame when it could be done and also a quote. I will put a $5 on the next section as it states you have to put in a budget. Thanks - Due date: Flexible

Need someone to remove this outdoor cat enclosure including the wood part attached to the floor. - Due date: Before Friday, 8 July 2022

Front door replacement: -Hanging/Installation of new door -Staining of new door -Removal of old door Job needing to be done asap - Due date: Before Friday, 8 July 2022

Need someone to supply and install a 12v set up in my Ute for a fridge, also thinking about putting some spotties on, let me know if you can do this and we can discuss prices Cheers - Due date: Flexible

Hi, I am looking for someone who can install Flyscreens to a newly built house. Attaching the plan picture. Job is ready for measurement. Need the measurements done first and then I ll let you know when it is ready for installation. Price per Flyscreens offered is $40 plus gst.

New house being built and i need some insulation collected and put in walls before plaster goes in friday this week - Due date: Before Friday, 25 March 2022

Small iron garden shed needs putting together on concrete slab. Slab already laid. Shed is approx 3x3 m

Plastering wooden frame build as an walls

We are seeking a qualified professional to install a rectangular deck to go over the current alfresco area which is part concrete / soil. The span of the deck from house to fence is approx 4.6m in width, whilst the span of the deck from house to retaining wall in the garden is approx 8.5m. For durability and low maintenance we are seeking to use Aluminium Knotwood material, rather than wood. Please provide two quotes, one labour and materials and the other labour only. Important: * Must have used Knotwood before * Must be qualified and in the trade * Must quote based on labour and materials and also labour only Please advise your qualificiations / certifications. Responses that ignore these points will be dismissed Price is based on whether or not materials will be supplied Photos attached

I have a buffet unit that’s had fragrance oil spilled on it that has made the varnish go bad, I need about a 20cm square area sanded and re varnished/lacquered. The worst of the damage is in the photo but there are a few scattered drops near the main area. It can wait for the lockdown to end.

Hi. I need a sliding door for ensuite bathroom. Examples: https://www.workshop.bunnings.com.au/t5/Living-and-Bedroom/Barn-door-made-from-MDF-and-installed-onto-custom-bulk-head/td-p/74577 The ensuite opening is: - Height: 2270 mm - Width: 770 mm - Depth: 115 mm Please see attached measurement. Based on measurement and because of skirting board at bottom, I`m guessing a door of 2340 * 870 would be good enough. Please provide a quote and let me know what is included. Thanks all.

I have a Pergola/Verandah kit with Building Permit. Due to work comments I am unable to install it into my investment Property. It is located in Beekeeper Rd, Armstrong Creek. The materials (apart from Concrete) are already delivered to the property. Require installation. I have all the plans and installation instruction. The kit is from Softwoods SA.

I am looking for a licensed builder/carpenter who can install a floating desk in my study, I have purchased a 3.6m long timber benchtop from Bunnings that needs to be installed along. The wall is 3.5m so we would need to cut 10cm off the timber to make it fit. It would also need to be sanded and oiled at completion. I also do not have any tools to get this job done so the handyman would need to bring own. Hoping someone can assist.

We have been in our new house for a month and the man hole cover is too big and won’t fit between two trusses, our builder is taking too long to have it fixed so hoping someone can help us urgently.

Have bought an Absco shed from Bunnings, 2.26 x 1.52 x 2.08 high. Looking for someone to put it together and fix it to the shed slab.

Purchased an Absco shed from Bunnings with the dimensions of 0.78m by 3m and wanting it put together professionally and properly on to a concrete base. Happy to pay $40 an hour and capped at $200