Find skilled builders in SA

Need to install a small garden shed

Rebooking task between dane and Troy

Looking for quotes to supply and install automatic swing gates for residential driveway. 1. 4.5m wide x ∼1.8m high 2. Double swing, 2 x 2.25m leaves. Colorbond or aluminium slat infill, black frame preferred 3. Quality kit like BFT/Nice/FAAC with 2 remotes, keypad, safety photo eyes, battery backup 4. Supply + pour concrete footings for steel posts. Run 240V power ∼8m from house. Trenching under pavers may be required 5. Must meet AS/NZS 60335.2.103. Licensed + insured only Flat driveway, good access. Existing fence either side. Please provide itemized quote incl GST covering gates, automation, footings, electrical, and any provisional sums. Site visit preferred for accurate pricing.

Have 3 cat nets for under pergola. Correct size and threaded with rope around edges already. Need to put hooks into underside pergola beams and hang nets from them. Nets and spaces are same. 1 x 3m x 3m 2 x 6m x 3m

Hi. I had a timber pergola (3x3) installed about 2 months ago. Unfortunately it was installed higher than agreed and sits above gutter height. Additionally, the stirrups used are not sufficient as the pergola is wobbly. I am happy to labour and assist The job would probably consist of: Cutting posts about 200mm . Removing from current stirrup post anchors which are not suitable for pavers. Placing in tornado post supports (provided) I can provide the cement for the post supports and am happy to help with lifting etc.if needed Please let me know if this is something you are interested in doing Thankyou Danny

Cut through approx 1.5m of stamped concrete driveway along non painted edge (cut RHS) where slab has been lifted by tree root. When cut balance of slab to right will go back into place and I will need to lift the cut part and remov offending root before repacling cut slab

3m x 1.5m easy shed installed on concrete pavers Pavers will be in place so just need assemble and erecting. Have symbols supplied to fix to concrete pavers. I happy to assist with erecting part of required

Fence repair needed for my home in adelaide near drive way

Would like some modifications to my Pergola as per photos and below. Supply and install the following Modify existing pergola at both ends All measurments approx, happy for a visit before committing to task  End Modifications (Both Ends):  2800mm x 2800mm area  Install 1 x new post at 2100mm  Install 6 x new timber members at 2800mm  Install 8 x Colorbond sheets at 2800mm  Install 2 x beams (1950mm x 200mm x 50mm)  • Install 1 x centre post at 3000mm • Enclose left-hand side with cladding (TBC):  2600mm x 1950mm  1900mm x 1950mm • Enclose right-hand side with cladding:  2850mm x 1950mm • Existing roof to be levelled and braced to address sagging

Title: Install basic attached pergola/verandah (8.5m x 2.5m) – cheapest option Description: Looking for someone to install a basic attached pergola/verandah at my house in Greenwith SA. Size: - Approx 8.5m long x 2.5m wide - Attached to house What I want: - Simple, budget build only - Timber or basic steel frame (happy with cheapest option) - Polycarbonate / laserlight roofing (or cheapest suitable option) - Basic gutter + downpipe if needed - Standard posts + concrete footings Important: - I am after the most cost-effective solution - No lighting, no fans, no extras - Function over looks I already have a design/dimensions ready (can provide) Open to: - Supply + install quotes - OR install only if I supply materials (whichever is cheaper) Please include: - Rough total price - What materials you’d use - Timeframe Flexible on timing if it helps reduce cost. Located: Greenwith SA Thanks 👍

I’m looking for garden shed installer Build-a-Shed 3.0 x 2.3 x 2.3m Double Sliding Door $350

Flat pack garden shed walls have been assembled, just needs putting all together. We can provide a set of hands if needed. Please bring tools..

I have an old lattice fence attached to a pre-existing outdoor wooden pergola. With the recent winds, the lattice fence and associated wooden poles have significantly shifted and are dangerously close to falling on the neighbour's fence. I need someone to possibly chainsaw it down and dispose of the parts that are no longer needed.

Hey guys, I need a handyman who can install a new suntuf sheet on the pergola roof. Old one is broken. New sheet is $40, happy to pay $70 for the installation(Labour). The person needs to pick up the sheet from Bunnings as I don’t have a Ute or anything. Need this job done asap. Pics attached. Thanks

Tighten screws on pergola

Easy shed install. 3.0 x 0.78. Panels already assembled. Also bolt it down with the concrete anchor set.

Looking to purchase a particular pergola kit online but am seeking quotes to have somebody install it and fix it as a semi permanent structure to pavers before I make the purchase. The pergola itself is 3 x 3.6m and website says minimum of 2 people to install but is designed for DIY. Ideally would like someone to see the site as access can be difficult once kit would be delivered.

Supply and install material to enclose end of pergola down to door height. Paint to match existing . 4th pic is of other end and want to match.. Think it's blue board but im not sure

Need tiles laid under pergola 6.7x3.25m 600x600mm tiles Let me know your experience please Ideally done this weekend

Need to remove the part marked in red from my pergola, 5 pieces 2 meters each , keep all other parts