Find a professional pergola installation expert in Sydney Eastern Suburbs

I need the current wood sanded back. It’s been painted brown. Natural wood underneath needs to be sealed with 2-3 coats. Clear coats to preserve the look of the natural wood. Must have sanding machine and I can buy the stain

I bought an outdoor pergola and need it to be set up on my terrace. The instruction say the installation time is about 2-3 hours for 1-2 people. See Instruction Video: https://www.vevor.com.au/patio-gazebo-c_10247/vevor-3x3m-outdoor-retractable-pergola-with-sun-shade-canopy-aluminum-beige-p_010870770710?adp=gmc&utm_source=google&utm_medium=cpc&utm_id=12788073774&ad_group=128025845464&ad_id=515718708685&utm_term=&gad_source=1&gad_campaignid=12788073774&gbraid=0AAAAACYOjatcKGG3btLPgtMgm0WFZE_-K&gclid=CjwKCAjwxrLHBhA2EiwAu9EdM_KX3FcSL7cuEc3ZxrzSD7kFz8Edwzxuw4YZCQb2JRsYzINoguMn1hoC7s8QAvD_BwE

Scope of work: 10 long horizontal beams above garden area Existing beams are weathered with ivy stains (will require some prep like a light sand/wipe down) Height requires ladder work (ladder provided) Paint provided – only labour cost needed Prep (clean/light sand): ~2hrs Two coats of paint: ~4hrs Total job length: ~6hrs

Require a pergola to be built. The frame to either be gal steel or timber. It’s to run from the roof of the trailer to connect to the other shed, and to cover the side of the trailer and the steps. Roof to be made of colourbond with 2 polycarbonate sheets. The area is approximately 5m x 3m. A gutter with down pipe to be added on one side.

Replace existing polycarbonate pergola cover with nicer new polycarbonate (not corrugated). Approx 3m x 5m

Replace the polycarbonate roof for our existing pergola, seal the gap between the walls . Pergola dimension: 3.5x3.6M. Height is about 2.6M. Thanks

Sand and marine vanish pergola and exterior door per photos

1. Build a timber privacy screen to match or be similar to attached photo (see screen, screen_photo, screen_photo2 images) 2. Build and install three timber frames to hold fixed glass panels. See Frame1-3 images and drawings attached.

Remove pergola and vine along with bbq

I need a light and powerpoint terminated disconnected and removed from my outdoor pergola

steel has come away from arched end of plastic/perspex pergola

Replace/repair timber pergola post

We require a licensed painter to paint a pergola and new work we have done to our filter cabinet and walls around the pool. Some parts will need undercoat on new material. We have the paint and undercoat already.

Outdoor pergola approximately 10m X 4.5m as per images below. All the timbers need to be washed to remove spider webs and dust. It then needs to be painted with two coats (paint supplied). Bring your own brushes and/or rollers and drop sheets to protect the tiles underneath.

Need to secure a tarp on a pergola (hardware supplied) and a talk boy on a wall . Will need to bring own ladder

The pergola treated pine cross beam over time has dipped and twisted. It needs to be removed and replaced. It is 6 metres long. There are 3 cross struts resting on it. There is some light vine on the pergola.

Sand pergola surface. No painting involved.

About a meter 75 mm roof panels insulated pergola extension. About 90 cm width & long about 500 cm.I already got Pergola. Have to be same colour to match.primrose colour & white inside roof to match. As you see at photo.Also need to put net on gutter.

Needing a new pergola built and existing pergola removed. Sheets to be polycarbonate. Frame to be made of steel or timber. Size approx 6m*3m

I have an existing pergola per photos. Structurally very sound I want to replace the existing aluminium post with merbau timber posts. New posts are to fit into steel base plate and anchored into existing concrete. Budget is for labour only. Material costs would be additional. Licenced builder required.