Find a professional pergola installation expert in Inner South Melbourne

Supply & install polycarbonate sheet (transparent) as a roof on an existing pergola, 5.4 x 1.6 m (as pictured). You shall supply all materials and necessary tools. Please specify which sheet to be used and briefly explain your installation method.

Put up fairy lights in rear yard pergola

need a base or floor for a pergola

Pergola installation Aluminium kit. With 4 zip blinds.. 5m X 3.8m In a pool area. All parts are adjacent to the installation area. But need to be brought into the pool fenced area. Might required the porcelain pavers to be cut out at the feet of the pergola, or bolted through the porcelain with appropriate drill/core drill. Gm-outdoor dot com will show you the product. It's a gumei 220 series.

Put up covering plus guttering , I have posted 2 photos showing my area plus 2 photos of what my neighbours have had done as that’s what I’d like to be done.

I need all three panels on this pergola done in white, patch work has been completed. Material is aluminium

We have a deck that is partially covered by roofline in a townhouse, need the remainder of the deck covered. Approx 2m to fence line and 5.5-6m in length. There is a retaining wall with steel brackets that could be used to secure the posts on fence line.

Laser light on top of pergola is damaged and needs to be removed . Pergola is approx 5metres x 4 metres .

Sand down existing wooden pergola; repair 20 year old features. Repaint with base layer, etc; Reattach facia properly. NOTE: All paint and materials provided by carpenter ( ie. Included in the quote!)

need to build and install aluminium frame pergola with polycarbonate roof EzGlaze, SunGlaze 2.5 x 6.4

We ordered 6 motorised outdoor blinds for our pergola through Blinds Online. Three blinds are already installed, except for the side channels. The remaining three blinds are slightly too wide because our pergola isn’t perfectly square. Unfortunately we didn’t measure the top width…. Out by approx 20mm • Assess the best way to fit the remaining blinds • Potentially shave or trim the pergola posts slightly to allow the blinds to fit • Install the blinds and side channels • No electrical work is required

Take down and remove a timber pergola and grind the metal stirrups down to level. Care is required to avoid damage to pavers and to nearby glass pool fence and windows. This is a 2 person job.

Looking for an experienced roof plumber to inspect a pergola / shed roof and see if they can locate where the leak is coming from.. Determine if the the roof needs new sheets or can be sealed ..

Install either a pergola or verandah in our backyard over the deck.

We’d like to get a pergola built in our backyard, something similar to the picture. Approx 2.5x3m and 2.4 high. Timing is flexible. Give me quotes with or without materials. Thanks!

I'm a carpenter who is building a covered pergola with a ceiling. I need 6 downlights and a fan installed. Power nearby from existing lights in photo. These lights will be removed. I will supply lights and fan. Must supply certificate

I have purchased a mimosa burleigh gazebo from bunnings. I need it to be installed with concrete footings that are 450x450x600. The gazebo is large and may take 2 people to put up.

Very time poor with kids right now so need help applying fresh coat over pergola particularly where paint has chipped. I already have monument weather shield paint and primer along with medium roller if required so really only labor is required.

Looking for someone experienced in carpentry or handyman work to build a small pergola in my courtyard, see image attached Space is approx. [2.4 L x 3.4 in metres — e.g. 3m x 2.5m]. Pergola design: timber posts and beams with a clear polycarbonate (plastic slat) roof. Straightforward job, just need someone with the right tools and experience. Materials can be supplied by me, or I’m happy to discuss if you can supply. Please include examples of similar work if you have them.

We need an onsite inspection and quote.