Find skilled builders in Sydney Northern Beaches

Hi, have an automated pergola with louvres that are now not operating. Remote operating. Two sections, one that closes immediately on power being on, one section that will not move but with no visible signs of blockage. Installed by sunshade around 8 years ago, serviced around 5 years ago. Electrics may need replacing or resetting or mechanism maybe replacing. Can provide more pics if required.

I need to reduce my window and therefore need a small job to add more bricks to my window and remove the old window frame for my laundry window. Also I need to partially demolish the laundry wall and install a new door.

I have 4 sheets of clear polycarbonate that need to be attached to a pergola roof. I can help. The sheets are just under 1000mm wide x 3000mm long. Must have experience but doesn’t need to be over-engineered as the frame is already built and has a flexy clear plastic roof prior up to now. The smaller battens are to be removed (as seen in the pic - very easy to do) as these are not weight bearing and pointless with a non-flex polycarbonate roof going forward.

Looking for an experienced drainage contractor or licensed plumber to enlarge an existing small stormwater drain in a concrete driveway. The existing drain is approximately 150 mm diameter and frequently becomes blocked by leaves and debris, causing water to back up. Ideally looking to install a larger, vehicle-rated grate (perhaps 300 × 300 mm), potentially with a catch pit beneath it. Open to alternative suggestions, including a short channel drain, if more effective. Work to include: - Cutting and removing necessary concrete - Installing suitable larger grate/pit - Connecting to existing stormwater drainage - Ensuring water flows correctly into the drain - Reinstating surrounding concrete and removing debris Photos attached showing the existing drain and opening underneath. Located in Seaforth. Please quote including labour and materials.

I have a 3m (w) x 0.78m (d) x 1.95m (h) Easyshed that I need constructed and placed within an existing carport.

Demo area of patio Already cut off just needs smashing and removing Cary down to driveway area to trailer for my rental

Looking for someone to dismantle and remove two existing built-in wardrobes with mirrored sliding doors. One wardrobe has shelving and built-in drawers. Job includes: * Dismantling both wardrobes, including sliding doors, shelving, drawers and frames. * Removing all materials from the property. * Transporting everything to the tip for disposal. * Leaving the area clean and tidy afterwards. * Taking care not to damage walls or flooring Location: Balgowlah Heights, NSW. Budget: $250 total, including all labour, removal and tip fees. Please bring your own tools and a suitable vehicle or trailer for disposal.

- demolition/ removal of existing kitchen - demolition and removal of splashback and stone bench top - desposal of dishwasher, oven and cook top

Install 8x3 metre shadcloth over driveway. Dee Why. Should just be 4x tight D-Link or loop hooks drilled into the side of weatherboard house, garage brick and one corner bolted onto a timber post attached to fence. You will need to fix a strong post to the fence to attach 4th corner. Can share photos but will supply materials if you confirm what works best. Simple job for right person

I need tree roots removed from two areas of the driveway. The tree itself will be removed at a later date, so this job is to remove roots before they cause more damage. The tree root removal does not need to be at the tree level, just to fix the areas of the driveway. You'll also need to make good on relaying the bricks.

Current Driveway needs fixing track marks went over the driveway and now it is a mess. We tried to seal and didnt work. Any options are appreciated - want to keep the concrete colour ideally. Frenchs Forest

Hardtop Gazebo with Drainage Gutters, 120×120mm Aluminum Posts, Double Vented Roof & Curtains | Most Popular Choice for Garden or Backyard Grey / 3 × 3.65m

Remove cracked driveway slab and replace with rebar and fresh concrete

**Carpenter / handyman needed to puppy-proof backyard & pool area** Looking for an experienced carpenter or handyman to help puppy-proof our backyard for a small puppy. Work includes: * Seal gaps underneath timber decking and stairs so puppy cannot get underneath * Attach neat black mesh/gauze or similar temporary barrier along the bottom of the existing pool fence to close puppy-sized gaps (without compromising pool fence safety/compliance) * Install a new spring-loaded/self-closing lock/latch on side gate * Check side fencing and gates for any other puppy-sized gaps and seal as required * Suggest practical/neat solutions where needed Would like the finished result to be **secure but as neat and unobtrusive as possible**, particularly around the pool fencing. Will need you to assess what materials are required and purchase/supply them as part of the job (materials reimbursed separately/by agreement). Please bring appropriate tools and have experience with outdoor carpentry/handyman work and fixing into timber/brick as required.

I need help bringing 1 cubic meter of soil from drive way to garden beds in back garden. 3 flights of stairs to tackle Hoping to get it done tomorrow Saturday 15th Aug. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

EasyShed Bike Shed assembly - we have done the back wall but need the final steps completed. Does not require any ground levelling, just the assembly of the shed.

Install an easy shed in belrose.

Assembly of: 2.25m x 0.78m EasyShed Bike Shed https://easyshed.com.au/products/garden-bike-shed-2-25m-w-x-0-78m-d-classic - assemble onto pavers (slightly inclined but flat surface) See photos - No need to anchor into pavers - Will need your own tools (eg power drill/driver and potentially a pop-rivet gun, as doing this with a manual screwdriver is nearly impossible)

I need an Absco Ezislider garden shed assembled and secured to an existing timber base at my property in North Balgowlah. Shed details: ● Absco Ezislider shed ● 3.0m wide x 0.78m deep x 1.95m high ● Skillion roof ● Double sliding doors ● Brand new in box The timber base has already been constructed and is ready for installation. Scope of work: ● Assemble the shed according to the manufacturer’s instructions ● Secure the shed to the existing timber base ● Ensure doors slide and lock correctly ● Leave the site clean and remove packaging Please provide: ● Your experience assembling sheds ● Photos of similar work if available ● Confirmation that you have your own tools Location: North Balgowlah, NSW

We need a nice dog kennel built on site to keep two large dogs dry. 1m wide x 1.5m long. Door 75cm high. I am unaware of how long it would take or how much this would cost so the fee I am offering is based on a full day and materials would be paid additionally by provision of receipts Chat GPT gave me the plan for it - it’s an example only- I can see mistakes in it! But we do want the same shape and I’ll paint it black. (You don’t need to paint it) Let me know if any questions